914CE
SERIES
002381
Issue 10
MICRO SWITCH Miniature Precision Limit Switches
DESCRIPTION
All MICRO SWITCH 914CE Series
miniature precision switches incorporate
fluorocarbon diaphragm sealing to
provide reliable protection, meeting
NEMA 1, 2, 3, 3R, 4, 6, 6P, and 13, as well
as IP66, IP67, and IP68 requirements.
Versions with a boot seal also meet
NEMA 12 requirements (dust, falling dirt,
liquid media with solid contaminates).
The cable or connector and basic switch
terminals are encapsulated in an epoxy
sealant, offering excellent resistance in
harsh environments. For low temperature
applications (down to -40 °C, -40 °F), CE
Series switches can be supplied with low
temperature seals and lubricant.
The CE Series switches are rugged
and versatile switches which can be
applied indoors in many harsh factory
floor applications, as well as on outdoor
equipment in extreme temperatures.
A full range of actuators are available,
including pin plungers, roller plungers,
side rotary, multi-directional wire, and
manually operated. The switches are
also available with the industry standard,
M12 micro-change 4-pin connector.
MICRO SWITCH 914CE products meet
North American, cURus standards,
as well as European CE and United
Kingdom UKCA requirements.
FEATURES
VALUE TO CUSTOMERS
• Rugged, miniature construction means
minimal real estate on equipment
• NEMA 1, 2, 3, 3R, 4, 6, 6P, 12
(boot seal), 13, and IP66/67/68
environmental sealing
• Pre-leaded (UL cable) or supplied with
a M12 four-pin connector
• Wide selection of actuators and cable
length variations with side and bottom
exit cable/connector options
• 25 mm mounting centers engineered
with a MICRO SWITCH SM switch for
consistent, precise actuation
• Well suited for up to 10 million
actuation cycles (Up to 5 million
actuation cycles for wobble actuators)
• Gang mounting capability to provide a
multi-plunger limit switch
• Low temperature variants available for
indoor and outdoor applications
• cURus, CE approvals for world-wide
use
• UKCA approval for United Kingdom
use
• Big performance in a small package
• Delivers consistent performance in
many demanding environments where
petroleum, synthetic, or water based
fluids are present
• Product variation within defined
nomenclature
DIFFERENTIATION
• Diaphragm seal between the actuator
and the switch cavity for high
performance sealing
• CE Series incorporates a MICRO
SWITCH SM basic switch for
consistent, precise actuation
• Side exit termination for space
constraints
POTENTIAL APPLICATIONS
• Machine tools
• Off-road equipment
• Material handling
• Dock locks and dock levelers
• Access and mobility solutions
• Textile machinery
• Robotics
• Packaging equipment
• Commercial appliances
• Print trade machinery
• Agricultural machinery
PORTFOLIO
The 914CE Series is part of the
14CE, NGC, SZL-VL-S, SSCE
and SL1 Series of miniature
limit switches. Honeywell also
offers a portfolio of MICRO SWITCH
Heavy-Duty Limit Switches and
General Purpose Limit Switches.
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
TABLE 1. SPECIFICATIONS
Characteristic
Parameter
Description
compact enclosed limit switch
Actuators
• Top pin plunger (914CE1-)
• Parallel roller plunger (914CE2-)
• Cross roller plunger (914CE3-)
• Side rotary (914CE16-)
• Top pin plunger with boot seal (914CE18-)
• Top adjustable plunger (914CE19-)
• Wobble (914CE20-)
• Manually operated (914CE22-)
• Top pin plunger, panel mount (914CE27-)
• Ball bearing plunger (914CE66-)
• Top roller plunger, parallel and panel mount (914CE28-)
• Top roller plunger, perpendicular, panel mount (914CE29-)
• Top roller plunger, parallel & boot sealed (914CE31-)
• Top roller plunger, perpendicular, boot seal (914CE55-)
Terminations
SJTO 4 x 0,75 mm2 (18 AWG) cable
Connector (dc), 4-pin male, M12 thread (-Q), (-Q2) Revised pin-out, see page 3
Connector (ac), 4-pin male, 1/2 in x 20 thread (-Q1)
Switching options
SPDT, snap action contacts (1NC/1NO), Form C
Sealing
IP66, IP67, IP68*; NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13
Operating temperature
0 °C to 105 °C [32 °F to 221 °F]; optional -40 °C to 105 °C [-40 °F to 221°F]
Side rotary: -40° C to 100 °C [-40 °F to 212 °F]
Mechanical life
up to 10 million (up to 5 million for wobbles) cycles
Thermal current
1A
Rated insulation voltage (Ui)
250 V
Rated impulse withstand
voltage (Uimp)
1.5 kV
Short circuit protection device (SCPD) Quick blow fuse suitable for rated current of switch
Pollution degree
3
Min. actuation speed
0.003 m/s
Max. actuation speed
0.1 m/s
Max. actuation frequency
ac – 200 Hz; dc – 20 Hz
Shock
50 g – IEC 60068-2-27
Vibration
10 g – IEC 60068-2-6
Approvals
cURus, CE, UKCA
Conforming to standards
EN 60947-5-1; AC-14 D300, DC-13 R300
UL recognized to US and Canadian Requirements
*IP68 sealing submerged in one meter of water for 24 hours
TABLE 2. ELECTRICAL RATINGS (IN AMPERES)
Model example
Contacts
914CE* - *
Silver contacts
914CE* - *G
Gold contacts
914CE* -Q, -AQ, -AQ1, -Q2 Silver contacts
Rating
A
B
C with 4-pin connector
Rating code
A
Make
Break
240 Vac, ind.
1.2
0.2
240 Vac, res.
5
5
28 Vdc, res.
3
3
28 Vdc, ind.
3
3
5 A, 1/10 HP, 125 Vac or 250 Vac
–
–
B
5-25 mA
5-50 Vdc
–
–
C
3 A, 125 Vac or 250 Vac
–
–
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 2
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
SWITCHING AND LEAD IDENTIFICATION
914CE
GREEN
SPDT
RED
2
BLACK
1
3
WHITE
2
3
1
PINOUTS
Connector - (dc) (-Q)
Connector (dc) (-Q2)
Connector (ac) (-Q1)
NO 3
2
2
1
3
1
3
1C
NC 2
CONNECTOR VERSIONS
MOUNTING
in both bottom and side exit versions.
MICRO SWITCH 914CE Series switches are mounted by using
two M5 or #10 screws. The mounting holes are counter bored
to keep the screw heads within the overall switch housing
3 is available1with
The 914CENO
Series
C a 4-pin, M12 size connector
-Q, -Q2
NC 2Versions
Q1 Version
8.0
GANG MOUNT CAPABILITY
15
15
15
isonmale
connector
dcBrad
typeHarr
4 pin
,
CAT.
No.80466 M12Thread
M12
thread
OPTION Q
dimensions.
ac type, 4 pin male,
1/2 in x 20 thread
OPTION Q1
The housing on the 914CE Series has been designed to enable
the user to build his own multiple plunger switch by gang
mounting several switches. All pin plunger and roller plunger
types are suitable for gang mounting. There is a 16 mm distance between the plungers. Both Series types are very versatile
that even a lever-type version could be added at the end of the
row.
BOTTOM EXIT OR SIDE EXIT ORIENTATION
The CE Series has been designed with a pre-wired cable fitted
in the bottom of the switch housing. Other variations are available with a side exit cable.
GOLD CONTACT VERSIONS
For low energy applications, gold contact versions of the 914CE
switches can be supplied upon request.
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 3
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
GENERAL DIMENSIONS • ALL SWITCHES
CABLE VERSION
40 mm max.
[1.57 in max.]
16 mm max.
[0.63 in max.]
25 mm
[0.98 in]
Two (2) holes Ø 5.1 mm [Ø 0.2 in] dia. c/bore
10,2 mm dia x 6 mm deep [0.40 in dia x 0.24 in deep]
(Both sides - option “A” only)
Pretravel (PT)
Overtravel (OT)
3 mm min.
[0.12 in min.]
Max. free length
Operating
position (OP)
7,6 mm
[0.30 in]
M12
thread
44 mm max.
[1.73 in max.]
8,0 mm
[0.31 in]
TYPE
Q or Q2
15 mm
[0.59 in]
1/2 x 20 UNF
thread
TYPE
Q1
8,0 mm
[0.32 in]
PRODUCT NOMENCLATURE
29
Switch Type
Actuator Type
914CE Series
Small Precision
Limit Switch
3
–
914CE
Options1
Cable Length*
Connectors*
dc type
single keyway
1
Top pin
plunger
oper.
22 Manually
nylon button
3
3 feet
A
Side entry
Q
2
Top roller
plunger, parallel
pin plunger,
27 Top
panel mount
6
6 feet
G
Gold
contacts
Q1
ac type
two keyways
3
Top roller
plunger, perp.
parallel
28 plunger,
panel mount
9
9 feet
P
Top
mounting
Q2
dc type
optional pin-out
Side
perp.
29 plunger,
panel mount
Top roller
Top roller
16 rotary
Top roller
pin plunger
parallel
18 Top
31 plunger,
w/ boot seal
boot seal
Top adjustable
19 pin plunger
20
Coil
wobble
Top roller
perp.
55 plunger,
boot seal
66
Top ball bearing
plunger
12 12 feet
L1
15 15 feet
V
Low temp.
-40 °C, cable
not for flexing
Viton® seals/
gasket
(side rotary and
booted sealed
plungers only)
Bottom exit is
standard.
NOTE: not all combinations of model codes are available.
Please contact your Honeywell provider/representative for assistance.
*Select “Cable Length” or “Connectors”.
More than one option may be permissible.
1
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 4
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
914CE1 • Pin Plunger
914CE27 • Pin Plunger Panel Mount
Ø10,0 mm
[Ø0.39 in]
PT
OT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
M10 X 1 METRIC THREAD
12 mm [0.49 in]
THREADED LENGTH
OT
PT
FP
OP
914CE18 • Boot Sealed Pin Plunger
Ø7,0 mm
[Ø0.28 in]
OT
BOOT SEAL
PT
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
FP
OP
914CE66 • Ball Bearing Plunger
7,9 mm [0.31 in] DIA
BALL BEARING
OT
OP
PT
FP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3
Gold
B
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3G
Silver
A
Side
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
–
914CE1-3A
Silver
A
Bottom
31,1 mm
[1.23 in]
29,3 mm
[1.15 in]
Panel mount
914CE27-3
Silver
C
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
dc-type, single
keyway
914CE1-Q
Silver
C
Bottom
17,5 mm
[0.69 in]
15,7 mm
[0.62 in]
ac-type,
two keyways
914CE1-Q1
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
26,7 mm
[1.05 in]
24,9 mm
[0.98 in]
–
914CE18-3
Silver
A
Side
26,7 mm
[1.05 in]
24,9 mm
[0.98 in]
–
914CE18-3A
Silver
A
Bottom
26,7 mm
[1.05 in]
24,9 mm
[0.98 in]
Fluorocarbon
seals
914CE18-3V
Silver
C
Bottom
26,7 mm
[1.05 in]
24,9 mm
[0.98 in]
ac-type,
two keyways
914CE18-Q1
Silver
C
Side
26,7 mm
[1.05 in]
24,9 mm
[0.98 in]
ac-type,
two keyways
914CE18AQ1
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
26,2 mm
[1.03 in]
24,4 mm
[0.96 in]
–
914CE66-3
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 5
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
914CE2 • Roller Plunger
914CE28 • Roller Plunger Panel
Mount
Ø12,4 mm
[Ø0.49 in]
PT
OT
FP
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 12,2 N [2.75 in-lb]
ROLLER
Ø 12,4 mm x 4,7 mm
[Ø 0.48 in x 0.020 in]
M14 X 1 THREAD
OT
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
–
914CE2-3
Gold
B
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
–
914CE2-3G
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
ac-type, two
keyways
914CE2-Q1
Silver
C
Bottom
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
dc-type,
single keyway
914CE2-Q
Silver
A
Side
30,3 mm
[1.19 in]
28,5 mm
[1.12 in]
–
914CE2-3A
Silver
A
Bottom
44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount
914CE28-3
Silver
C
Bottom
44,3 mm
[1.75 in]
42,5 mm
[1.67 in]
Panel mount, actype, two keyways
914CE28-Q1
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
–
914CE31-3
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
Fluorocarbon
seals
914CE31-3V
PT
FP
OP
914CE31 • Boot Sealed Roller Plunger
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
BOOT SEAL
OT
OP
PT
FP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 6
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
914CE55 • Boot Sealed Cross Roller
Plunger
ROLLER
Ø 12,4 mm x 4,7 mm
Ø 0.48 in x 0.020 in]
BOOT SEAL
OT
PT
FP
OP
NYLON BUTTON
Ø26,4 mm
[Ø1.04 in]
PT
FP
OP
M4 CORROSION
RESISTANT SCREW AND LOCKNUT
OT
FP
[ADJUSTABLE]
OP
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 17,5 N [5 lb]
914CE20 • Random Motion
Wire Actuator
OP
ALL DIRECTIONS
EXCEPT DIRECT
PULL
Ø1.8 mm
[Ø0.07 in]
335,0 mm max.
[13,98 mm max.]
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
36,2 mm
[1.43 in]
34,4 mm
[1.36 in]
–
914CE55-3
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
29,2 mm
[1.15 in]
27,4 mm
[1.08]
23,9 mm [0.94 in]
dia. button
914CE22-3
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
–
914CE19-3
Adjust.
32 mm to
39 mm
[1.26 in to
1.54 in]
–
914CE19-3G
–
914CE19-3A
ac-type, two
keyways
914CE19-Q1
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 8,9 N [2 in-lb]
914CE19 • Adjustable Plunger
PT
Elec
Rating
Pretravel • 1,8 mm [0.071 in]
Diff. travel • 0,1 mm [0.004 in]
Overtravel • 3,0 mm [0.118 in]
Oper. force • 22,2 N [5 in-lb]
914CE22 • Manually Operated
OT
Contacts
Oper. point • 28 mm [1.10 in] max.
Oper. force • 0,55 N [0.12 lb] max.
Gold
B
Bottom
Silver
A
Side
Silver
C
Bottom
Adjust.
33,8 mm
to 40,8
mm
[1.33 in
to 1.61
in]
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
–
–
–
914CE20-3
Silver
A
Side
–
–
–
914CE20-3A
Silver
C
Bottom
–
–
dc-type,
single keyway
914CE20-Q
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 7
MICRO SWITCH MINIATURE PRECISION LIMIT SWITCHES, 914CE SERIES
914CE16 • Side Rotary
Contacts
Elec
Rating
Cable/
Connector
Position
Free Position (FP)
Operating
Position
(OP)
Options
Listing
Silver
A
Bottom
–
–
–
914CE16-31
Silver
A
Side
–
–
–
914CE16-3A1
Silver
C
Bottom
–
–
ac-type, two
keyways
914CE16-Q11
Silver
C
Bottom
–
–
dc-type,
single keyway
914CE16-Q1
Silver
C
Side
–
–
ac-type, two
keyways
914CE16AQ11
FP
PT
OT
DT
Actuator shaft
Ø7,32 mm
[Ø0.288 in]
1
PT
OT
DT
18,9 mm
[0.74 in]
Pretravel • 30°
Diff. travel • 3°
Overtravel • 40°
Oper. force • 0,34 Nm [3 in-lb]
Switch operates on clockwise and counterclockwise rotation of lever shaft.
Note: part numbers are shown with 3 ft of cable. The -X indicates the number of feet of cable provided. 6-foot, 9-foot, and 12-foot lengths along
with custom lengths, are also available.
TABLE 3. LEVERS FOR 914CE16 SERIES SIDE ROTARY SWITCHES
Rod/
Rod/
Roller
Roller
Roller
Material Dia.
MountWidth
mm
ing
mm [in]
[in]
Fixed 38,1 mm [1.5 in] radius
Catalog
Listing
–
Rollerless
n/a
n/a
n/a
LSZ51A
Nylon
19
[0.75]
6,35
[0.25]
Front
LSZ51B
Steel
19
[0.75]
6,35
[0.25]
Front
LSZ51C
Nylon
LSZ51D
Steel
LSZ51L
Ball
bearing
19
[0.75]
19
[0.75]
19
[0.75]
6,35
[0.25]
6,35
[0.25]
6,35
[0.25]
LSZ51P
Nylon
19
[0.75]
12,7
[0.50]
Back
Back
Back
Front
Adjustable 38,1 mm to 89,0 mm [1.5 in to 3.5
in] radius
Roller–
n/a
n/a
n/a
less
19
6,35
LSZ52A Nylon
Back
[0.75] [0.25]
19
6,35
LSZ52B Steel
Back
[0.75] [0.25]
19
6,35
LSZ52C Nylon
Front
[0.75] [0.25]
19
6,35
LSZ52D Steel
Front
[0.75] [0.25]
LSZ52L
Ball
bearing
19
[0.75]
6,35
[0.25]
Rod/
Rod/
Roller
Roller
Roller
Material Dia.
MountWidth
mm
ing
mm [in]
[in]
Fixed 38,1 mm [1.5 in] radius
Roller–
n/a
n/a
n/a
less
19
6,35
LSZ55A Nylon
Back
[0.75] [0.25]
19
6,35
LSZ55B Steel
Back
[0.75] [0.25]
19
6,35
LSZ55C Nylon
Front
[0.75] [0.25]
19
6,35
LSZ55D Steel
Front
[0.75] [0.25]
Short fixed - 33 mm [1.3 in] radius
19
6,35
LSZ59A Nylon
Front
[0.75] [0.25]
19
6,35
LSZ59B Steel
Front
[0.75] [0.25]
19
6,35
LSZ59C Nylon
Back
[0.75] [0.25]
19
6,35
LSZ59D Steel
Back
[0.75] [0.25]
38,1 mm [1.5 in] radius one-way roller lever
Catalog
Listing
LSZ60A
Nylon
19
[0.75]
6,35
[0.25]
Front
LSZ60B
Steel
19
[0.75]
6,35
[0.25]
Front
Front
MICRO SWITCH 914CE Miniature Precision Limit Switch Datasheet | sps.honeywell.com/ast | 8
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture
as being free of defective materials and
faulty workmanship during the applicable
warranty period. Honeywell’s standard product
warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order
acknowledgment or consult your local sales
office for specific warranty details. If warranted
goods are returned to Honeywell during the
period of coverage, Honeywell will repair or
replace, at its option, without charge those
items that Honeywell, in its sole discretion,
finds defective. The foregoing is buyer’s sole
remedy and is in lieu of all other warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose. In no event shall Honeywell be
liable for consequential, special, or indirect
damages.
While Honeywell may provide application
assistance personally, through our literature
and the Honeywell web site, it is buyer’s sole
responsibility to determine the suitability of
the product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility
for its use.
FOR MORE INFORMATION
Honeywell Advanced Sensing
Technologies services its customers
through a worldwide network of sales
offices and distributors. For application
assistance, current specifications, pricing
or the nearest Authorized Distributor,
visit our website or call:
USA/Canada +1 302 613 4491
Latin America
+1 305 805 8188
Europe
+44 1344 238258
Japan
+81 (0) 3-6730-7152
Singapore
+65 6355 2828
Greater China
+86 4006396841
Honeywell
Advanced Sensing Technologies
830 East Arapaho Road
Richardson, TX 75081
sps.honeywell.com/ast
002381-10-EN | 10 | 06/21
© 2021 Honeywell International Inc. All rights reserved.
m WARNING
MISUSE OF
DOCUMENTATION
•
•
The information presented in this
product sheet is for reference only.
Do not use this document as a
product installation guide.
Complete installation, operation,
and maintenance information
is provided in the instructions
supplied with each product.
Failure to comply with these
instructions could result in death or
serious injury.
