9302905

HONEYWELL See full Datasheet below... BUY NOW BUY NOW masterelectronics.com & onlinecomponents.com are authorized e-commerce distributors of electronic components. APPLICATIONS MODEL MM • • HVAC • GAS CHROMATOGRAPHY • PAINT SPRAYING SYSTEMS • ELECTRONIC PRESSURE SWITCHES • MEDICAL DIAGNOSTICS • HEAT PUMPS • HYDRAULIC CONTROLS • IRRIGATION SYSTEMS • AUTOMOTIVE MEDIAMATE PRESSURE TRANSDUCER ® MEDIAMATE SERIES The MEDIAMATE ® pressure transducer provides you with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration. The MEDIAMATE’s wetted parts and outer case are made from 300 series stainless steel. It is now being used with a wide variety of corrosive media such as Freon®, ammonia, water, and hydraulic fluids. Its rugged construction and proven reliability make it truly cost effective. FEATURES • • • • BENEFITS Low cost Rugged, compact configuration PC mountable Threaded port • • • • For use by the OEM Easy to package Mounting flexibility No adapter required MM 100 P G 1 Q A Output Model A = 0-50 mV Range 015 025 050 100 200 500 01K 02K 05K 07K Termination H = Hirshmann (includes mate) Q = Hollingsworth Pressure Port PSI Unit P = PSI 1 = 1/8-27 NPT 3 = 3/8 UNF 10 = G-1/8 BSP Reference G = Guage (PSIG) Note: Not all combinations are available. Minimum quantity orders apply. Contact the factory for more details. This datasheet has been downloaded from http://www.digchip.com at this page PRESSURE TRANSDUCER HOW TO ORDER MEDIAMATE® SERIES • PRESSURE TRANSDUCER TECHNICAL SPECIFICATIONS DIMENSIONS RANGE 0-15, 25, 50, 100, 200, 500, 1000, 2000, 5000, 7112 PGIS (0-1, 2, 3, 3.5, 7, 14, 35, 70, 138, 345, 500 BAR G) BAR ranges are equivalent xx.xx = inches (xx.x) = mm MEDIAMATE WITH HOLLINGSWORTH PHYSICAL Proof Pressure < 500 psi 2 X rated range ≥ 500 psi 1.5 X rated range Burst Pressure < 500 psi 10 X rated range ≥ 500 psi 5 X rated range (30 kpsi max) Material in Contact with Media 1.83 [46.48] 1.60 [40.64] 1.00 Ø [25.4] Brazed assembly of 300 series stainless steel parts Shock 50 g’s peak (5 milliseconds) Vibration 4 .75 [19.14] 1 3 2 Meets MIL-STD-810-C, Figure 514.2-5, Curve AP, 46.3 g rms minimum Weight 1/8-27 NPT Less than 3 oz (85 gm) 0.5 HEX (12.7 MM) ELECTRICAL Full Scale Output 50 ±1mVdc at rated excitation voltage @ 25° C Zero Output MEDIAMATE WITH HIRSCHMANN 2.15 [54.61] 0.0 ±2.5 mVdc @ 25° C Excitation 1.60 [40.64] 5.0 Vdc recommended, 6.0 Vdc maximum Input Impedance 500 Ohm (nominal) Output Impedance 900 Ohm (nominal) Insulation Resistance ≥1000 MOhm @ 50 Vdc maximum Electrical Connection .75 [19.14] .63 [16] SQUARE Flat pins, Hollingsworth S09617SF or equivalent (Thomas and Betts AD-183 or BD-183, if using boot) 2 3 4 1 1/8-27 NPT 0.5 HEX (12.7 MM) VENT HOLE PERFORMANCE Accuracy 0.5% FSO BFSL, 50 PSI and UP, ±1% FSO BFSL, 15, 25 PSI Includes effects of nonlinearity, hysteresis and nonrepeatability Operating Temperature Range -40° to 100° C (-40° to 212° F) -40° to 90° C (-40° to 194° F) with Hirschmann Compensated Temperature Range Thermal Effect on Zero Thermal Effect on Full Scale Output PIN CODES ARE FOR OPTIONAL HIRSCHMANN AND HOLLINGSWORTH CONNECTORS -1° to 82° C (30° to 180° F) Less than ±1% FSO for any 55°C (100° F) change within the compensated range Less than ±1% for any 55°C (100° F) change within the compensated range NOTE: All specifications are measured at 25°C (77°F) and at rated excitation unless otherwise specified . NOTE: Meets IEC-68-2 or MIL-STD 810C. NOTE: Contact the factory to discuss other pressure ranges. Hirshmann Pin Code 1 1 + Signal 2 2 - Excitation 3 3 - Signal 4 4 + Excitation Function WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Item # 1076200 M.G. 3/01 Rev. A Sensing and Control Honeywell 100 Discovery Way Acton, MA 01720 USA Tel: (877) 384-1300; Fax: (978) 263-0630 Hollisworth Pin Code www.honeywell.com/sensing/