9306405

APPLICATIONS MODEL SA • HARSH DUTY PRESSURE TRANSDUCER The harsh duty SA pressure transducer has a water resistant, stainless steel case for complete protection from harsh environments. Internal hermetic sealing is used to provide measurement of absolute pressures (PSIA) or pressures referenced to a sealed chamber (PSIS). Underwriters Laboratories has approved the SA as a component in float and pressure-operated motor controllers (File # E93356). The SA produces a high level voltage output of 1-6V output from an unregulated supply. It is fully calibrated and compensated prior to shipment, and is field interchangeable. FEATURES BENEFITS Rugged stainless steel case PSIS and PSIA models Ranges to 7100 PSIS RFI/EMI protection Reverse polarity protection • • • • • For use in industrial environments Sealed construction Broad range of applications For use in high noise environments Installation safety HOW TO ORDER SA 100 P S 1 C 1 D E Model Special Features E = CE Approved Range Output 015 025 050 100 200 300 500 01K 03K 05K 07K PSI 001 007 010 015 020 035 050 070 Reference A = Absolute G = Gage S = Sealed D = 1-6 Vdc Cable Length 1 = 3 feet Termination BAR H = Hirshmann C = Cable Unit P = PSI 100 200 350 B = BAR 1 = 1/8-27 NPT 3 = 3/8 UNF 11 = PT-1/4 Note: Not all combinations are available. Minimum quantity orders apply. Contact the factory for more details. Pressure Connections HARSH DUTY PRESSURE TRANSDUCER • • • • • SA SERIES • FREON & AMMONIA REFRIGERATION SYSTEMS • HYDRAULIC CONTROLS • AGRICULTURAL SPRAYERS AND DUSTERS • COMPRESSORS • ENGINE CONTROLS • ENERGY MANAGEMENT SYSTEMS • ROBOTICS • AUTOMATED MACHINING • PNEUMATIC SYSTEMS SA SERIES • HARSH DUTY PRESSURE TRANSDUCER TECHNICAL SPECIFICATIONS DIMENSIONS RANGES 0-15, 25, 50 PSIG 0-15,25, 50, 100, 200 PSIA 0-500, 1000, 2000, 3000, 5000 PSIS 0-1, 7, 10, 15, 20, 35, 50, 70, 100, 200, 350 Bar PHYSICAL Proof Pressure < 500 psi 2 X rated range ≥ 500 psi 1.5 X rated range Burst Pressure < 500 psi 10 X rated range ≥ 500 psi 5 X rated range (30kpsi max) Material in Contact with Media 300 series stainless steel, braze compound Weight xx.xx = inches (xx.x) = mm SA WITH CABLE 1/8-27 NPT 3/8-24 UNF (optional ≥100 PSI) 3 conductor color coded shielded cable 3 ft long (0.91 m) Excitation: Red 1.56 (40) Signal: Wht Common: Blk Bare (case shield) 0.75 (19) 0.38 (10) Less than 3 oz. without cable ENVIRONMENTAL* Shock Vibration 1.88 (48) 50 g’s peak (5 ms), 100 g’s peak (11 ms) Meets MIL-STD 810C, Figure 514-5, Curve AK, Time Schedule II Random Vibration Test (Overall g rms = 20.7 minimum) ELECTRICAL* 1/2 Hex for 1/8-27 NPT port 9/16 Hex for 3/8-24 UNF port Ratiometric Voltage SA WITH HIRSCHMANN CONNECTOR 1.0 ± 0.15 Vdc Zero Output 5.0 ± 0.1 Vdc (1.0 - 6.0V) Full Scale Output* Excitation 9-20 Vdc Supply Current 15.0 mA typical (>500 PSI 20.0 mA ) Source (nominal) 10.0 mA Sink (nominal) 5.0 mA 2 4 3 1 0.50 (10) PERFORMANCE* Response Time 0.75 (19) 1.88 (48) < 500 microseconds EMI/RFI (10v/m radiated 150kHz-1gHz) Electrical Connection 3ft sheilded 3-conductor cable 22 AWG Color coded Accuracy 1.56 (40) ±1.0% F.S.O. best fit straight line, Includes: non-linearity, hysteresis, non-repeatability. Thermal errors are not included. Operating Temperature Range -55° to 105°C (-48° to 221°F) Compensated Temperature Range -1° to 85°C (30° to 185°F) PIN AND WIRE CODES Function + Excitation Signal Output Common Case Shield Thermal Effect on Zero Less than ±1.0% F.S.O. for any 55°C (100°F) change within the compensated range Thermal Effect on Full Scale Less than ± 1.0% for any 55°C (100°F) change within the compensated range *Note: All specifications are measured at 25°C and rated excitation unless otherwise stated. Hirschmann Pin Code Red White / Brown 4 2 Black Bare NC 3 WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Item # 1063100 M.G. 3/01 Rev. A Sensing and Control Honeywell 100 Discovery Way Acton, MA 01720 USA Tel: (877) 384-1300; Fax: (978) 263-0630 Wire Color Code www.honeywell.com/sensing/