Basic Board Mount
Pressure Sensors
ABP Series—High Accuracy
Digital or Analog Output
Compensated/Amplified
60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
Datasheet
Basic Amplified Board Mount Pressure Sensors
The Basic Amplified ABP Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for
reading pressure over the specified full scale pressure span and temperature range.
The ABP Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy
errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC).
Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.
The ABP Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for
operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure gage and differential pressures.
The Basic Amplified pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.
The following options extend the performance of these sensors to non-corrosive liquids.
•
•
No silicone gel coating: The input port is limited to non-corrosive, non-ionic media such as dry air and gases and should not
be exposed to condensation. The gases are limited to media that are compatible with high temperature polyamide, silicone,
alumina ceramic, silicon, gold, and glass.
Silicone gel coating: Uses the same materials in the wetted media path but is protected from condensation by a siliconebased gel coating; allows use in applications where condensation may occur.
All products are designed and manufactured according to ISO 9001 standards.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
,
Proprietary Honeywell technology
Protected by multiple global patents
Industry-leading long-term stability: ±0.25 %FSS
Total Error Band (TEB): ±1.5 %FSS
Industry-leading accuracy: ±0.25 %FSS BFSL
High burst pressures
Industry-leading flexibility
Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi
Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements
Optional internal diagnostic functions
Energy efficient
Output: ratiometric analog; I2C- or SPI-compatible 14-bit digital output
(min. 12-bit sensor resolution)
Small size: As small as 8 mm x 7 mm
REACH and RoHS compliant
Sleep mode option (see Technical Note)
Temperature output option
Liquid media option
Table of Contents
General Specifications. . . . . . . . . . . . . . . . . . . 3
Operating Specifications . . . . . . . . . . . . . . . . . 4
Potential Applications
MEDICAL
• CPAP
• Blood analysis
• Blood pressure monitoring
• Breast pumps
• Drug dosing
• Hospital beds
• Massage machines
• Oxygen concentrators
• Patient monitoring
• Sleep apnea equipment
• Urine analyzers
• Ventilators/portable ventilators
• Wound therapy
INDUSTRIAL
• Air brakes
• HVAC/transmitters
• Life sciences
• Material handling
• Pneumatic control
• Pneumatic regulator
• Process gas monitoring
• Valve positioning and positioners
Transfer Function Limits. . . . . . . . . . . . . . . . . . 5
Nomenclature and Order Guide. . . . . . . . . . . . 6
COMMERCIAL
Pressure Range Specifications . . . . . . . . . . . 7-8
•
•
•
PCB Layouts. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dimensional Drawings:
Air beds
Coffee makers
Washing machines
DIP Packages. . . . . . . . . . . . . . . . . . . . . . . 9-10
SMT Packages . . . . . . . . . . . . . . . . . . . . 11-12
Leadless SMT Packages. . . . . . . . . . . . . . . . 13
Additional Information. . . . . . . . . . . . back page
2
sensing.honeywell.com
STABILITY • ACCURACY • FLEXIBILITY • SMALL SIZE
General Specifications
Table 1. Absolute Maximum Ratings1
Characteristic
Min.
Max.
Unit
Supply voltage (Vsupply)
-0.3
6.0
Vdc
Voltage on any pin
-0.3
Vsupply + 0.3
V
Digital interface clock frequency:
I 2C
SPI
100
50
400
800
kHz
2
—
kV
-40 [-40]
85 [185]
°C [°F]
ESD susceptibility (human body model)
Storage temperature
Soldering time and temperature:
lead solder temperature (DIP)
peak reflow temperature (Leadless SMT, SMT)
4 s max. at 250 °C [482 °F]
15 s max. at 250 °C [482 °F]
Absolute maximum ratings are the extreme limits the device will withstand without damage.
1
Table 2. Environmental Specifications
Parameter
Characteristic
Humidity (Gases only; see “Options N and D” in Figure 2.)
0% to 95% RH, non-condensing
Vibration
15 g, 10 Hz to 2 kHz
Shock
100 g, 6 ms duration
1 million pressure cycles minimum
Life1
J-STD-020-D.1 Moisture Sensitivity Level 1
(unlimited shelf life when stored at
很抱歉,暂时无法提供与“ABPLLND060MGAA3”相匹配的价格&库存,您可以联系我们找货
免费人工找货