MICRO SWITCH™
Medium-Duty Limit Switches
E7 and V7 Series
Datasheet
MICRO SWITCH™ E7 and V7 Series
Medium-Duty Limit Switches
Honeywell MICRO SWITCH™ E7/V7 Series medium duty limit switches are designed for a wide variety of indoor and
outdoor applications. Typical applications include equipment for commercial, industrial, and transportation industries.
The electrostatic applied epoxy coating to the aluminum housings enhances the durability of the product in most applications. The E7/V7 family of switches incorporates the Honeywell MICRO SWITCH™ BZ switch element which has
the reliable snap-spring mechanism with more than 60 years of proven service.
The sealed (plungers with boots) E7/V7 Series are preferred for applications where there could be exposure to liquid
and/or particulate environments. The unsealed E7/V7 Series are ideal for applications where there will not be exposure
to liquid or dust environments. The compact size of the limit switch permits installation where there is limited space
available on equipment.
The SPDT (Single Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to CE and CSA for worldwide applications. While the DPDT (Double Pole Double Throw) E7/E7S/V7/E9 Series of catalog listings are certified to
CE for many applications.
What makes our switches better?
Designed with MICRO SWITCH™ BZ or DT basic switches to
deliver precise switching of electrical and mechanical operating
characteristics
Rugged, epoxy-coated aluminum housing for indoor and outdoor
applications
Small footprint with easy access to wiring terminals
Available in a configuration suited to the application with variety of
actuators, circuitries, conduits, and mounting options
HIGH PERFORMANCE • DURABILITY
CUSTOMIZATION • EASY TO INSTALL
2
sensing.honeywell.com
Features
and Benefits
DESIGNED FOR DEMANDING ENVIRONMENTS AND
APPLICATIONS
MICRO SWITCH™ E7/V7 Series switches include a wide variety of actuators and
feature an electrostatic epoxy coated aluminum housing for durability in a wide
range of applications. The products are engineered with MICRO SWITCH™ BZ or
DT internal basic switches that have years of proven service.
Side and flange mounting options
RELIABLY HANDLES ELECTRICAL LOADS
The E7/V7 Series are available with SPDT contacts or DPDT contacts with
momentary action to meet circuit requirements. The BZE/BZV Series with
SPDT contacts is rated for AC15, A300 and DC13, Q300 for typical ac and
dc applications. The DTE Series with DPDT contacts is rated for AC15, B300
and DC13, R300 for typical ac and dc applications. An internal ground screw is
provided to meet electrical codes as required.
DESIGN FLEXIBILITY
These limit switches are offered with multiple connectivity options: two different
conduit offerings, with single or double conduits.
GLOBAL APPROVALS
The BZE7, BZE7S, BZV7, and BZE9 Series with SPDT (single-pole double throw)
contacts are certified to CE and CSA for worldwide applications. The DTE7 and
DTE7S Series with DPDT (double-pole double throw) contacts are certified to CE
for many uses.
INDOOR AND OUTDOOR OPTIONS
The Series’ temperature range of -30 °C to 70 °C [-22 °F to 158 °F] makes the
switch well suited for a wide range of indoor and outdoor applications.
sensing.honeywell.com
3
Potential Applications
INDUSTRIAL
• Escalator obstruction detection – Roller actuator mounted behind skirt on
escalators, if activated, power to the escalator is cut to avoid injury
• Air curtain – A component in a circuit for control of air stream
• Door or gate position – Can provide a signal when a door or gate is opened or
closed
• Commercial food processing – For large scale food preparation, to ensure all
features are in the desired operating position
TRANSPORTATION
• Traffic barrier signaling – If traffic barrier lowers, signal lights can be activated
Figure 1. MICRO SWITCH™ E7/V7 Features and Options
Wide variety of
actuators and
operating
characteristics
Hardened steel plunger
for long life
Stainless steel roller
Wide variety of
actuators and
operating
characteristics
Diaphragm plunger
seal for long life
Captive screws (2)
Captive screws (2)
Switch assembly
can be rotated
180˚ on bottom enclosure
Switch assembly can be
rotated 180˚ on bottom
enclosure
Terminal screws of switch easily
accessed with housing removed
Terminal screws of switch
easily accessed with
enclosure removal
Double conduit option for
through wiring
One piece molded rubber
insulator seal
Rugged aluminum
enclosure
epoxy coated for
environmental
durability
Internal ground screw
provided in
bottom enclosure
Threaded conduit
Rugged aluminum
enclosure
epoxy coated for
environmental
durability
One piece molded
rubber insulator seal
Internal ground screw
provided in enclosure
Threaded conduit
Typical switch assembly, flange mount,
without boot sealed actuator
Typical switch assembly, side mount,
with boot sealed plunger
Four mounting options
∙ Diagonal side mount (E7 Series)
∙ Side mount on 25,4 mm centers (E7S Series)
∙ Side mount on 76 mm centers with double conduit (E9 Series)
∙ Flange mount (V7 Series)
4
sensing.honeywell.com
MICRO SWITCH™ Medium-Duty Limit Switches
Table 1. Specifications
Characteristic
Parameter
top pin plunger (boot sealed or standard type);
inline roller plunger (boot sealed or standard type);
cross roller plunger (boot sealed or standard type);
roller lever adjustable (boot sealed or standard type);
one-way roller lever adjustable (boot sealed);
coil spring wobble (boot sealed)
Actuators
diagonal side mount with single conduit (E7 type);
diagonal side mount or side mount with single conduit (E7S type),
side mount with double conduit (E9 type)
flange mount with single conduit (V7 type)
Enclosure type
Housing material
electrostatic epoxy coated aluminum
Termination
threaded conduit, 20 mm or PG 13,5
actuator with boot seal: IP65
actuator (QN8 style) with internal plunger seal: IP65
actuator without boot seal or internal plunger seal: IP50
Sealing
SPDT (snap-action contacts) 1NC/1NO, same polarity
DPDT (snap-action contacts) 2NC/2NO, each pole same polarity
Switching options
Operating temperature
-30 °C to 70 °C [-22 °F to 158 °F]
Electrical rating
see tables 2 and 3
Rated impulse voltage Ui
1.5 kV
Pollution degree (with enclosure)
1 (DTE Series); 2 (BZE and BZV Series)
Agency certifications
EN/IEC 60947-5-1 (all Series); CSA file 15775 (BZ prefix only)
Table 2. BZE and BZV Series Electrical Ratings: EN60947-5-1, IEC 60947-5-1
Designation &
Category
Thermal Current,
It (Amps)
Rated Operational
Voltage, Ue
Rated Operational
Amps, Ie
VA Rating Make
VA Rating Break
AC15, A300
10
120
6
7200
720
AC15, A300
10
240
3
7200
720
DC13, Q300
10
125
0.55
69
69
DC13, Q300
10
250
0.27
69
69
Table 3. DTE Electrical Ratings: EN60947-5-1, IEC 60947-5-1
Designation &
Category
Thermal Current,
It (Amps)
Rated Operational
Voltage, Ue
Rated Operational
Amps, Ie
VA Rating Make
VA Rating Break
AC15, B300
5
120
3
3600
360
AC15, B300
5
240
1.5
3600
360
DC13, R300
5
125
0.22
28
28
DC13, R300
5
250
0.1
28
28
Table 4. Switching
SPDT (BZE and BZV Series)
C
NC
NO
DPDT (DTE Series)
C
NC
NO
C
NC
NO
sensing.honeywell.com
5
E7 and V7 Series
PRODUCT NOMENCLATURE
BZ
E7
Switch Type
Enclosure
Type
BZ Series
Basic Switch, E7
SPDT
V7
DT Series
E7S
Basic Switch2,
DPDT
E9
—
Diagonal side
mount w/ single
conduit entry2
2
R
Internal Base
Switch Construction Contact
2
Standard
(single break)
R
Standard
Flange mount
version of E7
Side mount w/
single conduit
entry*2
Side mount w/
double conduit
entry
* mounting holes
provide interchangeability
with BZE6 products
1
2
3
6
NOTE: not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
DT Series basic switch available with enclosure type E7 or E7S only.
With “Q” style plunger only.
sensing.honeywell.com
N
2
Plunger
Type
Actuator
Code
—
Pin plunger
N
Seal boot
Q
No seal boot
(blank)
Inline roller plunger
internal
QN with
plunger seal
3
2
Adjustable
roller lever
8 Roller plunger
80
9
Inline roller
plunger with
removeable roller3
Coil spring
18 wobble stick
One-way
28 roller lever
Cross
81 roller plunger
C
Conduit
Thread
PG
C
PG 13,5 mm
conduit
20 mm
conduit
MICRO SWITCH™ Medium-Duty Limit Switches
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
38,58 ±0,76
[1.519 ±0.030]
1,98
[0.078]
5,56
[0.219]
0,05
20 mm
[0.002]
BZE7-2RN-PG
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
38,58 ±0,76
[1.519 ±0.030]
1,98
[0.078]
5,56
[0.219]
0,05
[0.002]
DTE7-2RN-C
DT, B300,
DPDT R300
454 to 1389
[16 to 49]
40,95 ±1,14
[1.612 ±0.045]
3,18
[0.125]
3,18
[0.125]
1,78
20 mm
[0.070]
Pin Plunger
(see Figure 1)
B300,
R300
A300,
Q300
A300,
Q300
B300,
R300
B300,
R300
454 to 1389
[16 to 49]
3628 [128]
max.
3628 [128]
max.
3628 [128]
max.
3628 [128]
max.
40,95 ±1,14
[1.612 ±0.045]
59,56 ±1,19
[2.345 ±0.047]
59,56 ±1,19
[2.345 ±0.047]
59,31 ±1,19
[2.335 ±0.047]
59,31 ±1,19
[2.335 ±0.047]
3,18
[0.125]
3,81
[0.150]
3,81
[0.150]
4,06
[0.160]
4,06
[0.160]
3,18
[0.125]
3,18
[0.125]
3,18
[0.125]
3,18
[0.125]
3,18
[0.125]
1,78
PG
[0.070]
13,5
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
1,65
20 mm
[0.065]
1,65
PG
[0.065]
13,5
BZE7-2RN2-C
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
[0.188]
5,56
[0.219]
0,20
20 mm
[0.008]
BZE7-2RN2-PG
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
[0.188]
5,56
[0.219]
0,20
[0.008]
DTE7-2RN2-C
DT, B300,
DPDT R300
1134 [40]
max.
64,36 [2.534]
Ref
6,76
[0.266]
5,56
[0.219]
4,19
20 mm
[0.165]
DTE7-2RN2-PG
DT, B300,
DPDT R300
1134 [40]
max.
64,36 [2.534]
Ref
6,76
[0.266]
5,56
[0.219]
4,19
[0.165]
BZE7-2RN28-C
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
-
5,94
[0.234]
5,56
[0.219]
0,15
20 mm
[0.006]
BZE7-2RN28-PG
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
-
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
DTE7-2RN28-C
DT, B300,
DPDT R300
1134 [40]
max.
-
6,76
[0.266]
5,56
[0.219]
4,19
20 mm
[0.165]
BZE7-2RN18-C
BZ, A300,
SPDT Q300
-
-
15°
20° Ref
-
20 mm
BZE7-2RN18-PG
BZ, A300,
SPDT Q300
-
-
15°
20° Ref
-
PG
13,5
DT,
DPDT
BZ,
BZE7-2RQN8-C
SPDT
BZ,
BZE7-2RQN8-PG
SPDT
DT,
DTE7-2RQN8-C
DPDT
Inline Roller Plunger
DT,
(see Figure 2)
DTE7-2RQN8-PG
DPDT
Roller Lever
(see Figure 3)
One-way Roller
Lever
(see Figure 4)
Coil-Spring Wobble
(see Figure 5)
DTE7-2RN-PG
Comments
Pretravel max.
mm [in]
255 to 680
[9 to 24]
Conduit Thread
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZE7-2RN-C
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 5. Order Guide • E7 Diagonal Side Mount with Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
PG
13,5
Roller
plunger
assembly
can be
positioned
at 90°
increments
PG
13,5
PG
13,5
PG
13,5
sensing.honeywell.com
7
E7 and V7 Series
DIMENSIONS
Figure 1. E7 Series, top pin plunger, diagonal mount with boot
seal
1,93 [0.076] pretravel
Figure 2. E7 Series, inline roller plunger, diagonal mount,
sealed
3,8 [0.15] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
38,58 OP
[1.519]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
59,56
OP
[2.345]
4,06 [0.16]
68,28 [2.69]
76,40 [3.01]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
Ø 16,0 [Ø 0.63]
25,4
[1.00]
12,7 [0.50]
conduit
centerline
Ø 14,73
[Ø 0.58]
5,84 [0.23]
4,06 [0.16]
Figure 3. E7 Series, roller lever, diagonal mount with boot seal
Ø 19,05 x 7,92 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
18,29
[0.72]
76,40 [3.01]
Figure 4. E7 Series, one-way roller lever, diagonal mount with
boot seal
39,6
[1.56]
24,38
[0.91]
225°
12,7 [0.50]
conduit
centerline
62,28 [2.69]
180°
Ø 19,0 [0.75] x
7,9 [0.31] W
roller
18,3
[0.72]
32,26
[1.27]
48,11
[1.894]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
48,11
[1.894]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
12,7 [0.50]
conduit
centerline
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
76,40 [3.01]
Figure 5. E7 Series, coil wobble, diagonal mount with boot
seal
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
151,13
[5.95]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
Ø 14,73
[Ø 0.58]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
8
sensing.honeywell.com
12,7 [0.50]
conduit
centerline
12,7 [0.50]
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
28,70 ±0,76
[1.30 ±0.030]
0,38
[0.015]
5,56
[0.219]
0,05
20 mm
[0.002]
Pin Plunger
(see Figure 6)
BZE7-2RQ-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
28,70 ±0,76
[1.30 ±0.030]
0,38
[0.015]
5,56
[0.219]
0,05
[0.002]
BZ,
SPDT
BZ,
SPDT
BZ,
SPDT
BZ,
SPDT
A300,
Q300
A300,
Q300
A300,
Q300
A300,
Q300
255 to 369
[9 to 13]
255 to 369
[9 to 13]
255 to 369
[9 to 13]
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
44,53 ±1,19
[1.753 ±0.047]
44,53 ±1,19
[1.753 ±0.047]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
0,38
[0.015]
0,38
[0.015]
0,38
[0.015]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
3,56
[0.140]
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
BZE7-2RQ81-C
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
3,56
[0.140]
0,05
20 mm
[0.002]
BZE7-2RQ81-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
3,56
[0.140]
0,05
[0.002]
BZE7-2RQ2-C
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
[0.188]
5,56
[0.219]
0,15
20 mm
[0.006]
BZE7-2RQ2-PG
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
[0.188]
5,56
[0.219]
0,15
[0.006]
BZE7-2RQ8-C
BZE7-2RQ8-PG
BZE7-2RQ9-C 1
Inline Roller Plunger
(see Figure 7)
Cross Roller
Plunger
(see Figure 8)
Roller Lever
(see Figure 9)
1
BZE7-2RQ9-PG 1
Comments
Pretravel max.
mm [in]
255 to 369
[9 to 13]
Conduit Thread
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZE7-2RQ-C
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 6. Order Guide • E7 Series Switches, Diagonal Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
PG
13,5
Removable
roller
Removable
roller
PG
13,5
PG
13,5
With roller removed, plunger can be rotated 90° and roller re-assembled for a cross roller plunger.
sensing.honeywell.com
9
E7 and V7 Series
DIMENSIONS
Figure 6. E7 Series, top pin plunger, diagonal mount
0,38 [0.015] pretravel
Figure 7. E7 Series, inline roller plunger, diagonal mount
0,4 [0.015] pretravel
Ø 8,38 [Ø 0.33]
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
33,02 OP
[1.30]
13,97
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
12,7 [0.50]
conduit
centerline
44,5
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
Figure 8. E7 Series, cross roller plunger, diagonal mount
Figure 9. E7 Series, roller lever, diagonal mount
225°
44,53
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
Ø 14,73
[Ø 0.58]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
39,6
[1.57]
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
wide roller
0,38 [0.015] pretravel
12,7 [0.50]
conduit
centerline
37,8
[1.49]
18,3
[0.72]
23,1
[0.91]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
Ø 14,73
[Ø 0.58]
4,06 [0.16] 62,28 [2.69]
76,40 [3.01]
10
sensing.honeywell.com
12,7 [0.50]
conduit
centerline
12,7 [0.50]
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
A300,
Q300
A300,
Q300
A300,
Q300
B300,
R300
255 to 680
[9 to 24]
255 to 680
[9 to 24]
255 to 680
[9 to 24]
454 to 1389
[16 to 49]
43,66 ±0,89
[1.719 ±0.035]
43,66 ±0,89
[1.719 ±0.035]
43,66 ±0,89
[1.719 ±0.035]
46,02 ±1,27
[1.812 ±0.050]
1,98
[0.078]
1,98
[0.078]
1,98
[0.078]
3,18
[0.125]
5,56
[0.219]
5,56
[0.219]
5,56
[0.219]
3,18
[0.125]
0,05
0.5-14
[0.002] NPSM
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
1,78
20 mm
[0.070]
BZ, A300,
SPDT Q300
3628 [128]
max.
64,64 ±1,32
[2.545 ±0.052]
3,81
[0.150]
3,18
[0.125]
0,05
20 mm
[0.002]
DT, B300,
Inline Roller Plunger DTE7S-2RQN8-C DPDT R300
(see Figure 11)
3628 [128]
max.
64,39 ±1,32
[2.535 ±0.052]
4,06
[0.160]
3,18
[0.125]
1,65
20 mm
[0.065]
BZE7S-2RN2-C
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
71,42
[2.812 ] Ref.
4,76
[0.188]
5,56
[0.219]
0,15
20 mm
[0.006]
BZE7S-2RN2-PG
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
71,42
[2.812 ] Ref.
4,76
[0.188]
5,56
[0.219]
0,15
[0.006]
DTE7S-2RN2-C
DT, B300,
DPDT R300
1134 [40]
max.
69,44
[2.734 ] Ref.
6,76
[0.266]
5,56
[0.219]
4,19
20 mm
[0.165]
BZE7S-2RN28-C
BZ, A300,
SPDT Q300
227 to 567
[8 to 20]
-
5,94
[0.234]
5,56
[0.219]
0,15
20 mm
[0.006]
BZE7S-2RQN8-C
Roller Lever
(see Figure 12)
Comments
Differential Travel
max. mm [in]
BZ,
SPDT
BZ,
SPDT
BZ,
SPDT
DT,
DPDT
Conduit Thread
Over Travel min.
mm [in]
DTE7S-2RN-C
Pretravel max.
mm [in]
BZE7S-2RN-PG
Pin Plunger
(see Figure 10)
Operate Point
mm [in]
BZE7S-2RN-C
Operate Force
g [oz]
BZE7S-2RN
Electrical
Rating [page 5]
Catalog Listing
Switch type,
Circuitry
Table 7. Order Guide • E7S Series Switches, Side or Diagonal Mount with Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
Roller
plunger
assembly
can be
positioned
at 90°
increments
PG
13,5
One-Way Roller
Lever
(see Figure 13)
sensing.honeywell.com
11
E7 and V7 Series
DIMENSIONS
Figure 10. E7S Series, top pin plunger, side mount with boot
seal
1,93 [0.076] pretravel
Figure 11. E7S Series, inline roller plunger, side mount, sealed
3,8 [0.15] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
38,58
[1.519] OP
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
Ø 16,0 [Ø 0.63]
59,56 OP
[2.345]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
25,4
[1.00]
5,84 [0.23]
4,06 [0.16]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
12,7 [0.50]
conduit
centerline
62,28 [2.69]
76,40 [3.01]
25,4
[1.00]
5,84 [0.23]
4,06 [0.16]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit
centerline
62,28 [2.69]
76,40 [3.01]
Figure 12. E7S Series, roller lever, side mount with boot seal
Ø 19,05 x 7,92 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
18,29
[0.72]
48,11
[1.894]
5,84 [0.23]
180°
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
4,06 [0.16]
Ø 14,73
[Ø 0.58]
62,28 [2.69]
76,40 [3.01]
12,7 [0.50]
conduit
centerline
Ø 19,0 [0.75] x
7,9 [0.31] W
roller
39,6
[1.56]
24,38
[0.91]
225°
25,4
[1.00]
Figure 13. E7S Series, one-way roller lever, side mount with
boot seal
18,3
[0.72]
32,26
[1.27]
48,11
[1.894]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
12
sensing.honeywell.com
12,7 [0.50]
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
38,1 ±0,89
[1.5 ±0.035]
0,38
[0.015]
5,56
[0.219]
0,05
20 mm
[0.002]
Pin Plunger
(see Figure 14)
BZE7S-2RQ-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
38,1 ±0,89
[1.5 ±0.035]
0,38
[0.015]
5,56
[0.219]
0,05
[0.002]
BZ,
SPDT
BZ,
SPDT
BZ,
SPDT
A300,
Q300
A300,
Q300
A300,
Q300
255 to 369
[9 to 13]
255 to 369
[9 to 13]
255 to 369
[9 to 13]
49,61 ±1,32
[1.953 ±0.052]
49,61 ±1,32
[1.953 ±0.052]
49,61 ±1,32
[1.953 ±0.052]
0,38
[0.015]
0,38
[0.015]
0,38
[0.015]
3,56
[0.14]
3,56
[0.14]
3,56
[0.14]
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
0,05
20 mm
[0.002]
DTE7S-2RQ9-C
DT, B300,
DPDT R300
680 to 1361
[24 to 48]
49,61 ±1,19
[1.953 ±0.047]
3,56
[0.14]
3,18
[0.125]
1,65
20 mm
[0.065]
DTE7S-2RQ9-PG
DT, B300,
DPDT R300
680 to 1361
[24 to 48]
49,61 ±1,19
[1.953 ±0.047]
3,56
[0.14]
3,18
[0.125]
1,65
[0.066]
BZE7S-2RQ81-C
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
49,61 ±1,32
[1.953 ±0.052]
0,38
[0.015]
3,56
[0.14]
0,05
20 mm
[0.002]
BZE7S-2RQ2-C
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
61,11 [2.406]
Ref
4,78
[0.188]
5,56
[0.219]
0,15
20 mm
[0.006]
BZE7S-2RQ8-C
BZE7S-2RQ8-PG
BZE7S-2RQ9-C1
Inline Roller Plunger
(see Figure 15)
Comments
Pretravel max.
mm [in]
255 to 369
[9 to 13]
Conduit Thread
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZE7S-2RQ-C
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 8. Order Guide • E7S Series Switches, Side or Diagonal Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
PG
13,5
PG
13,5
Removable
roller
Roller
plunger may
be rotated to
any position
around C/L
of plunger
Cross Roller
Plunger
(see Figure 16)
Roller Lever
(see Figure 17)
1
With roller removed, plunger can be rotated 90° and roller re-assembled for a cross roller plunger.
sensing.honeywell.com
13
E7 and V7 Series
DIMENSIONS
Figure 14. E7S Series, top pin plunger, side mount
0,38 [0.015] pretravel
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
(2) Ø 5,16
[Ø 0.203]
mounting holes
25,4
[1.00]
25,4
[1.00]
5,84 [0.23]
0,4 [0.015] pretravel
Ø 8,38 [Ø 0.33]
33,02 OP
[1.30]
13,97
[0.55]
4,06 [0.16]
Ø 14,73
[Ø 0.58]
62,28 [2.69]
76,40 [3.01]
Figure 15. E7S Series, inline roller plunger, side mount
12,7 [0.50]
conduit
centerline
44,5
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
5,84 [0.23]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
Figure 16. E7S Series, cross roller lever, side mount
Figure 17. E7S Series, roller lever, side mount
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
Wide roller
0,38 [0.015] pretravel
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
4,06 [0.16]
62,28 [2.69]
76,40 [3.01]
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
39,6
[1.57]
225°
44,53
OP
[1.75]
12,7 [0.50]
conduit
centerline
37,8
[1.49]
18,3
[0.72]
23,1
[0.91]
(2) Ø 5,16
[Ø 0.203]
mounting holes
13,97
[0.55]
25,4
[1.00]
5,84 [0.23]
25,4
[1.00]
4,06 [0.16] 62,28 [2.69]
76,40 [3.01]
14
sensing.honeywell.com
12,7 [0.50]
conduit
centerline
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
A300,
Q300
A300,
Q300
255 to 680
[9 to 24]
255 to 680
[9 to 24]
38,58 ±0,76
[1.519 ±0.030]
38,58 ±0,76
[1.519 ±0.030]
1,98
[0.078]
1,98
[0.078]
5,56
[0.219]
5,56
[0.219]
0,05
20 mm
[0.002]
0,05
PG
[0.002]
13,5
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
38,58 ±0,76
[1.519 ±0.030]
1,98
[0.078]
5,56
[0.219]
0,05
[0.002]
PG 11
BZE9-2RQN8-PG
BZ, A300,
SPDT Q300
3628 [128]
max.
59,56 ±1,19
[2.345 ±0.047]
3,81
[0.150]
3,18
[0.125]
0,05
[0.002]
PG
13,5
BZE9-2RN2-C
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
[0.188]
5,56
[0.219]
0,20
20 mm
[0.008]
BZE9-2RN2-PG
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
66,34 [2.612]
Ref
4,78
[0.188]
5,56
[0.219]
0,20
[0.008]
PG
13,5
BZE9-2RN28-PG
BZ, A300,
SPDT Q300
227 to 256
[8 to 20]
-
5,94
[0.234]
5,56
[0.219]
0,15
[0.006]
PG
13,5
Inline Roller Plunger
(see Figure 19)
Roller Lever
(see Figure 20)
Comments
Differential Travel
max. mm [in]
BZ,
SPDT
BZ,
SPDT
Conduit Thread
Over Travel min.
mm [in]
BZE9-2RN-PG11
Pretravel max.
mm [in]
Pin Plunger
(see Figure 18)
Operate Point
mm [in]
BZE9-2RN-PG
Operate Force
g [oz]
BZE9-2RN-C
Electrical
Rating [page 5]
Catalog Listing
Switch type,
Circuitry
Table 9. Order Guide • E9 Series Switches, Side Mount with Sealed Actuator and Two Conduits
For catalog listings not shown, please contact your Honeywell distributor or representative.
Roller
plunger
assembly
can be
positioned
at 90°
increments
One-Way Roller
Lever
(see Figure 21)
sensing.honeywell.com
15
E7 and V7 Series
DIMENSIONS
Figure 18. E9 Series, top pin plunger, side mount with boot
seal
1,98 [0.078] pretravel
Figure 19. E9 Series, inline roller plunger, side mount with
seal
3,8 [0.15] pretravel
Ø 8,38 [Ø 0.33]
Ø 16,66 x 4,95 wide roller
[Ø 0.656 x 0.195]
Internal plunger seal
38,58 OP
[1.519]
14
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
31,2
[1.23]
59,56
OP
[2.345]
76,0 [2.99]
84,6 [3.33]
12,7 [0.50] (2)
conduit
centerline
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
Ø 16,0 [Ø 0.63]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
12,7 [0.50] (2)
conduit
centerline
76,0 [2.99]
84,6 [3.33]
Figure 20. E9 Series, roller lever, side mount with boot seal
Figure 21. E9 Series, one-way roller lever, side mount with
boot seal
Ø 19,05 x 7,11 wide roller
[Ø 0.75 x 0.312]
39,88
[1.57]
18,29
[0.72]
23
[0.906]
225°
180°
48,11
[1.894]
Ø 19,05 [0.75] x
7,92 [0.31] W
roller
39,6
[1.56]
18,3
[0.72]
32,26
[1.27]
48,11
[1.894]
14
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.551]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
12,7 [0.50] (2)
conduit
centerline
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
16
sensing.honeywell.com
12,7 [0.50] (2)
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
Pretravel max.
mm [in]
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
Conduit Thread
255 to 369
[9 to 13]
28,70 ±0,76
[1.30 ±0.030]
0,38
[0.015]
5,56
[0.219]
0,05
[0.002]
PG
13,5
BZE9-2RQ8-C
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
3,56
[0.140]
0,05
20 mm
[0.002]
BZE9-2RQ8-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
3,56
[0.140]
0,05
[0.002]
PG
13,5
BZE9-2RQ81-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
44,53 ±1,19
[1.753 ±0.047]
0,38
[0.015]
3,56
[0.140]
0,05
[0.002]
PG
13,5
BZE9-2RQ2-PG
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
56,03 [2.206]
Ref.
4,78
[0.188]
5,56
[0.219]
0,15
[0.006]
PG
13,5
Comments
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZE9-2RQ-PG
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 10. Order Guide • E9 Series Switches, Side Mount without Boot Sealed Actuator and Two Conduits
For catalog listings not shown, please contact your Honeywell distributor or representative.
Pin Plunger
(see Figure 22)
Inline Roller Plunger
(see Figure 23)
Cross Roller
Plunger
(see Figure 24)
Roller Lever
(see Figure 25)
sensing.honeywell.com
17
E7 and V7 Series
DIMENSIONS
Figure 22. E9 Series, top pin plunger, side mount
0,38 [0.015] pretravel
Figure 23. E9 Series, inline roller plunger, side mount
0,4 [0.015] pretravel
Ø 8,38 [Ø 0.33]
33,02 OP
[1.30]
13,97
[0.55]
(2) Ø 5,16
[Ø 0.203]
mounting holes
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
0,4 [0.015] pretravel
44,5 OP
[1.75]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
39,6
[1.56]
225°
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
18,3
[0.72]
23,1
[0.91]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
37,8
[1.49]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
12,7 [0.50] (2)
conduit
centerline
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
31,2
[1.23]
Ø 14,73 (2)
[Ø 0.58]
4,3 [0.17]
76,0 [2.99]
84,6 [3.33]
18
sensing.honeywell.com
12,7 [0.50] (2)
conduit
centerline
Figure 25. E9 Series, roller lever, side mount
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
wide roller
44,53
OP
[1.75]
(2) Ø 5,16
[Ø 0.203]
mounting holes
14
[0.55]
12,7 [0.50] (2)
conduit
centerline
Figure 24. E9 Series, cross roller lever, side mount
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
12,7 [0.50] (2)
conduit
centerline
MICRO SWITCH™ Medium-Duty Limit Switches
Pretravel max.
mm [in]
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
255 to 680
[9 to 24]
69,85 ±1,57
[2.75 ±0.062]
1,98
[0.078]
5,56
[0.219]
0,05
20 mm
[0.002]
BZV7-2RN-PG
BZ, A300,
SPDT Q300
255 to 680
[9 to 24]
69,85 ±1,57
[2.75 ±0.062]
1,98
[0.078]
5,56
[0.219]
0,05
[0.002]
Pin Plunger
(see Figure 26)
BZV7-2RN2-C
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
97,59 [3.842]
Ref.
4,78
[0.188]
5,56
[0.219]
0,20
20 mm
[0.008]
Roller Lever
(see Figure 27)
BZV7-2RN2-PG
BZ, A300,
SPDT Q300
284 to 567
[10 to 20]
97,59 [3.842]
Ref.
4,78
[0.188]
5,56
[0.219]
0,20
[0.008]
Comments
Conduit Thread
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZV7-2RN-C
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 11. Order Guide • V7 Series Switches, Flange Mount with Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
PG
13,5
PG
13,5
DIMENSIONS
Figure 26. V7 Series, top pin plunger, flange mount with boot
seal
1,93 [0.076] pretravel
Figure 27. V7 Series, roller lever, flange mount with booth seal
39,88
[1.57]
Ø 8,38 [Ø 0.33]
18,29
[0.72]
24,38
[0.91]
225°
69,85 OP
[2.75]
45,21
[1.78]
10,59
[0.42]
3,18
[0.125]
base
34,01[1.34]
76,4 [3,01]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
Ø 19,05 x 7,92 wide roller
[Ø 0.75 x 0.312]
48,11
[1.894]
13,97
[0.55]
25,4 5,84
[1.00] [0.23]
3,18
[0.125]
base
10,59
[0.42]
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
sensing.honeywell.com
19
E7 and V7 Series
Pretravel max.
mm [in]
Over Travel min.
mm [in]
Differential Travel
max. mm [in]
Conduit Thread
255 to 369
[9 to 13]
63,5 ±1,19
[2.50 ±0.047]
0,38
[0.015]
5,56
[0.219]
0,05
[0.002]
PG
13,5
BZV7-2RQ8-C
BZ, A300,
SDPT Q300
255 to 369
[9 to 13]
75,01 ±1,52
[2.953 ±0.060]
0,38
[0.015]
3,56
[0.140]
0,05
20 mm
[0.002]
BZV7-2RQ8-PG
BZ, A300,
SDPT Q300
255 to 369
[9 to 13]
75,01 ±1,52
[2.953 ±0.060]
0,38
[0.015]
3,56
[0.140]
0,05
[0.002]
BZV7-2RQ81-C
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
75,01 ±1,52
[2.953 ±0.060]
0,38
[0.015]
3,56
[0.140]
0,05
20 mm
[0.002]
BZV7-2RQ81-PG
BZ, A300,
SPDT Q300
255 to 369
[9 to 13]
75,01 ±1,52
[2.953 ±0.060]
0,38
[0.015]
3,56
[0.140]
0,05
[0.002]
BZV7-2RQ2-C
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
87,27 [3.436]
Ref.
4,78
[0.188]
5,56
[0.219]
0,15
20 mm
[0.006]
BZV7-2RQ2-PG
BZ, A300,
SPDT Q300
284 to 510
[10 to 18]
87,27 [3.436]
Ref.
4,78
[0.188]
5,56
[0.219]
0,15
[0.006]
Pin Plunger
(see Figure 28)
Inline Roller Plunger
(see Figure 29)
Cross Roller
Plunger
(see Figure 30)
Roller Lever
(see Figure 31)
20
sensing.honeywell.com
PG
13,5
PG
13,5
PG
13,5
Comments
Operate Point
mm [in]
BZ, A300,
SPDT Q300
Electrical
Rating [page 5]
BZV7-2RQ-PG
Catalog Listing
Switch type,
Circuitry
Operate Force
g [oz]
Table 12. Order Guide • V7 Series Switches, Flange Mount without Boot Sealed Actuator
For catalog listings not shown, please contact your Honeywell distributor or representative.
MICRO SWITCH™ Medium-Duty Limit Switches
DIMENSIONS
Figure 28. V7 Series, top pin plunger, flange mount
0,38 [0.015] pretravel
0,4 [0.015] pretravel
Ø 8,38 [Ø 0.33]
5,84
[0.23]
3,18
[0.125]
base
Ø 12,7 x 4,5 wide roller
[Ø 0.50 x 0.18]
44,5 OP
[1.75]
33,02
OP
[1.30]
13,97
[0.55]
25,4
[1.00]
Figure 29. V7 Series, inline roller plunger, flange mount
13,97
[0.55]
10,59
[0.42]
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
Ø 14,73
[Ø 0.58]
25,4
[1.00]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
Figure 30. V7 Series, cross roller plunger, flange mount
5,84
[0.23]
3,18
[0.125]
base
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
Figure 31. V7 Series, roller lever, flange mount
Ø 12,7 x 4,57
[Ø 0.50 x 0.18]
wide roller
0,38 [0.015] pretravel
10,59
[0.42]
Ø 19,0 [0.75] x
7,9 [0.312] W
roller
39,6
[1.57]
44,53
OP
[1.75]
225°
18,3
[0.72]
23,1
[0.91]
13,97
[0.55]
25,4 5,84
[1.00] [0.23]
3,18
[0.125]
base
10,59
[0.42]
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
37,8
[1.49]
13,97
[0.55]
25,4 5,84
[1.00] [0.23]
3,18
[0.125]
base
10,59
[0.42]
4,06 [0.16]
34,01[1.34]
76,40 [3,01]
Ø 14,73
[Ø 0.58]
12,7 [0.50]
conduit centerline
(2) Ø 5,16 [Ø 0.203]
mounting holes
sensing.honeywell.com
21
E7 and V7 Series
This Honeywell datasheet supports the following MICRO SWITCH™ E7/V7 Series Limit Switch Listings
BZE7-2RN2-PG
BZE7-2RN-PG
BZE7-2RQ8-PG
BZE7-2RQ81C
BZE7-2RN18-PG
BZE7-2RQN8-C
BZE7-2RQ-PG
BZE7S-2RN-PG
BZE9-2RQ-PG
BZE7-2RN18-C
BZE7-2RN18-CN14
BZE7-2RN2-6NC
BZE7-2RN28-C
BZE7-2RN28-PG
BZE7-2RN2-C
BZE7-2RN2-CN6
BZE72RNC
BZE7-2RN-C
BZE7-2RN-CN5
BZE7-2RN-D
BZE72RNPG
22
sensing.honeywell.com
BZE7-2RQ2-C
BZE72RQ2PG
BZE7-2RQ2-PG
BZE7-2RQ81-C
BZE7-2RQ81-PG
BZE7-2RQ8-C
BZE7-2RQ9-C
BZE7-2RQ9-PG
BZE7-2RQ-C
BZE72RQN8C
BZE7-2RQN8-PG
BZE7S-2RN
BZE7S-2RN28-C
BZE7S-2RN2-C
BZE7S-2RN2-PG
BZE7S-2RN-C
BZE7S-2RQ2-C
BZE7S-2RQ81-C
BZE7S-2RQ8-C
BZE7S-2RQ8-PG
BZE7S-2RQ9-C
BZE7S-2RQ-C
BZE7S-2RQN8-C
BZE7S-2RQ-PG
BZE9-2RN28-PG
BZE9-2RN2-C
BZE9-2RN2-PG
BZE9-2RN-C
BZE9-2RN-PG
BZE9-2RN-PG11
BZE9-2RQ2-PG
BZE9-2RQ81-PG
BZE9-2RQ8-C
BZE9-2RQ8-PG
BZE9-2RQN8-PG
BZV7-2RN2-C
BZV7-2RN2-PG
BZV7-2RN-C
BZV7-2RN-PG
BZV7-2RQ2-C
BZV7-2RQ2-PG
BZV7-2RQ81-C
BZV7-2RQ81-PG
BZV7-2RQ8-C
BZV7-2RQ8-PG
BZV7-2RQ-PG
DTE7-2RN28-C
DTE7-2RN2-C
DTE72RN2PG
DTE7-2RN2-PG
DTE7-2RN-C
DTE72RNPG
DTE7-2RN-PG
DTE7-2RQN8-C
DTE7-2RQN8PC
DTE72RQN8PG
DTE7-2RQN8-PG
DTE7S-2RN2-C
DTE7S-2RN-C
DTE7S-2RQ9-C
DTE7S-2RQ9-PG
DTE7S-2RQN8-C
MICRO SWITCH™ Medium-Duty Limit Switches
ADDITIONAL INFORMATION
The following associated literature is available on the Honeywell web
site at sensing.honeywell.com:
• Product installation instructions
• Product range guide
• Product nomenclature tree
• Product application-specific information
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
– Limit and enclosed switch reference standards
WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing.honeywell.com
23
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
002393-1-EN IL50 GLO
March 2015
Copyright © 2015 Honeywell International Inc. All rights reserved.
