CSNM511

Solid State Sensors Closed Loop Current Sensors CSN Series CATALOG NUMBER SYSTEM PLEASE NOTE: This matrix is intended only to aid you in identifying sensor catalog listings. It is not all-inclusive, and must not be used to form new listings. Example: CSNA111 CSN Closed Loop Current Sensor Current Range (Peak/RMS nom.) A ±70 A/50 A rms nom. B ±100 A/50 A rms nom. C ±90 A/50 A rms nom. D ±22 A/15 A rms nom. E ±36 A/25 A rms nom. F ±150 A/100 A rms nom. J ±600 A/300 A rms nom. K ±1200 A/500 A rms nom. L ±600 A/300 A rms nom. M ±1200 A/500 A rms nom. P ±90 A/50 A rms nom. R ±200 A/125 A rms nom. T ±150 A/50 A rms nom. Supply Voltage 1 ±15 V 2 ±13 V 3 ±5 V 4 ±12 V to 18 V 5 ±15 V to 24 V 6 ±12 V to 15 V Coil Characteristics 1 1:1000 turns/90 @ 70°C 2 1:2000 turns/160 @ 70°C 3 1:2000 turns/130 @ 70°C 4 1:1000 turns/50 @ 70°C 5 1:1000 turns/110 @ 70°C 6 1:1000 turns/30 @ 70°C 7 1:2000 turns/80 @ 70°C 8 1:2000 turns/25 @ 70°C 9 1:5000 turns/50 @ 85°C Housing Material 1 Polycarbonate/ABS blend PDFINFO page- 060 FEATURES Current sensing up to 1200 amps Measures AC, DC and impulse currents Lowest cost/performance ratio Rapid response, no overshoot High overload capacity High level of electrical isolation between primary and secondary circuits Small size and weight CLOSED LOOP SENSORS Closed loop current sensors measure AC, DC and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN Series is based on the principles of the Hall effect and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor. 60 Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA 1-815-235-6847 International 1-800-737-3360 Canada Solid State Sensors Closed Loop Current Sensors CSNA, CSNB, CSNE SERIES ORDER GUIDE Catalog Listing CSNA111 CSNB121 CSNB131 CSNE151 CSNE381* CSNH151* Current Range Amps ±70 ±100 ±100 ±5-36 ±5-36 ±4-43 Supply Voltage VDC ±5% ±15 ±15 ±15 ±15 ±5V ±15V Coil Characteristics Turns Resistance 1000 2000 2000 1000 1000 1000 90 160 130 110 66 110 @ 70°C @ 70°C @ 70°C @ 70°C @ 70°C @ 70°C Meas. Currents Nom. 50 mA for 50 A 25 mA for 50 A 25 mA for 50 A 25 mA for 25 A 25 mA for 25 A 25 mA for 25 A Meas. Resist (@ Inom) 40 to 130 40 to 270 40 to 300 100 to 320 0 to 84 100 to 320 CSN Series NOTE: Extended temperature range and potting also available. * Contact the 800 number for more information. SPECIFICATIONS Catalog Listing Offset Current @ 25°C, mA max. Temperature Drift, 0 to 70°C, mA Linearity Supply Voltage Galvanic Isolation @ 50 Hz/1 min. Accuracy Response Time Bandwidth Temperature Primary Circuit Connection Secondary Circuit Connection Current Drain ‘‘In-Out’’ Sense Signal Mounting CSNA111 ±0.20 ±0.35 typ. ±0.60 max. 0.1% ±15V 2.5 kV rms ±0.5% of IN (nominal Current) at 25°C