FC133WHI

618 Duraplug® Technical wiring devices | portable power www.mkelectric.co.uk Plugs and Adaptors Standards and approvals All 13 amp Duraplug rubber plugs conform to BS 1363/A Part 1: 1995. The plugs are third party approved and licensed by ASTA. Round pin plugs comply with BS546: 1950. Technical specification Terminal/cable size List No. Maximum cable size Outer diameter Conductor of cable (mm) C.S.A. (mm2) PF133 11.0 1.5 P53 9.4 0.75 P153 11.0 1.5 Description 13 amp plugs All Duraplug 13 amp plugs can be used on ring and radial circuits and are available with 13 amp fuses. Duraplug standard 13 amp plugs are supplied with 13 amp fuses; however, alternative fuse ratings are available to special order. Round pin plugs Available unfused at 5 and 15 amp. For a full range of corresponding products, see pages 220-223 in the product selector. Duraplug® Technical 619 portable power | wiring devices technical hotline +44 (0)1268 563720 Lead Connectors, Extension Leads, Portable Sockets and Cable Couplers Standards and approvals 2 pin Duraplug lead connectors comply with BS 5733: 2010. 3 pin Duraplug lead connectors comply with BS 5733: 2010. All 13A Duraplug trailing socket outlets comply with BS 1363/A Part 2: 1995. 15A Round pin Duraplug trailing socket outlets comply with BS 5733: 2010 and BS 546 for plug pin aperture and engagement face dimensions. All 13A Duraplug portable socket outlets comply with BS 1363/A Part 2: 1995. Cable Couplers comply with BS 5733:2010. (BS 1363 pin centres for 13A, BS 546 pin centres for 5A and 15A). Replacement fuses where fitted are to BS 1362. Cables to BS 6500: 2000 (Table 27). Technical specification Electrical Voltage rating: 250V a.c. Terminal capacities: Lead connector – 1.0mm2 conductor Trailing/Portable socket – 1.5mm2 conductor Max. cable capacity: Lead connector – LCP102: 2-core insulated cable with 1.0mm2 conductors, LCP103: 3-core insulated cable with 1.0mm2 conductors. 11mm overall diameter Trailing/Portable sockets – 3-core insulated cable with 1.5mm2 conductors, 11mm overall diameter Physical Ambient operating temperature: –5°C to +40°C Max. installation altitude: 2000 metres Description A range of tough, rewirable lead connectors for use with extension leads for domestic, garden and light workshop applications. Two pin lead connectors are only for use with double insulated class 2 appliances. Three pin lead connectors must be used with earthed appliances. Filtered socket only Protects electronic equipment by filtering mains borne interference such as Voltage spikes. This product complies with the LV (72/23/EEC) directive. Filtered Response Characteristics 0 Mains filter rated at 250v RMS and 0.15µF Varistar (Transient Voltage Suppressor) has a more constant voltage 275v ac Clamping voltage @ 40A: 665v Milliwatt constant: 800 Installation Features Duraplug products should not be allowed to lie in excessively damp areas, e.g. wet grass, puddles etc. Lead connectors ● Manufactured with a thermoplastic elastomer cover and polypropylene inserts Care must be taken to avoid contact with petroleum spirits. For added safety trailing sockets should be used in conjunction with a residual current device (RCD). For a full range of corresponding products, see pages 220-223 in the product selector. 3 6 9 Frequency MHz 12 15 18 21 24 -20 -30 -40 -50 Portable sockets Manufactured from high impact resistant ABS/Polycarbonate ● ● Integral cable grips ● ● Retaining lugs to prevent accidental disconnection Equal length wire stripping for ease of wiring ● Visible red nylon shutters ● Optional wall mounting holes Trailing sockets ● Manufactured from tough ABS/ Polycarbonate with rubber cover. FC153 is all-rubber construction ● All internal component parts are retained in the base for ease of wiring ● Visible red nylon shutters 27 -10 Attenuation dB Current rating: As ‘Product range’ table 30 620 Duraplug® Technical wiring devices | portable power www.mkelectric.co.uk Extension Leads TECHNICAL DATA GUIDE Product Code Socket Outlets EXL135WHI 13A 4-gang socket with fuse and neon, manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour white. EXL135BLK Cable Length Cable Plug Fuse Rating Cable Specification Plug Type 2 1.25mm 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour white. Duraplug Rubber cover type PF133. Colour white. 13 13A 4-gang socket with fuse and neon, manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour black. 2 1.25mm2 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour black. Duraplug Rubber cover type PF133. Colour black. 13 EXL136WHI 13A 4-gang socket with switch and neon, manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour white. 2 1.25mm2 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour white. Duraplug Rubber cover type PF133. Colour white. 13 EXL136BLK 13A 4-gang socket with switch and neon, manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour black. 2 1.25mm2 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour black. Duraplug Rubber cover type PF133. Colour black. 13 EXL137WHI 13A 4-gang socket with fuse, switch and neon, 2 manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour white. 1.25mm2 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour white. Duraplug Rubber cover type PF133. Colour white. 13 EXL137BLK 13A 4-gang socket with fuse, switch and neon, 2 manufactured from high impact resistant ABS/Polycarbonate thermoplastic. BS1363A: Part 2: 1995. Colour black. 1.25mm2 3-core PVC insulated cable to BS 6500: 2000: Table 27/IEC227-5. Colour black. Duraplug Rubber cover type PF133. Colour black. 13 2