GKZ91

Relialign™ Commercial Door Interlock Switch 001042 CDI Series Issue 4 Datasheet FEATURES DESCRIPTION Similar in design to the RDI Series, the Relialign CDI Door Interlock Series is also an electromechanical device designed for use in commercial applications where swing/hinge door applications are in service. This Relialign Series design incorporates a “mechanical lock” feature (power-to-unlock solenoid) rather than a solenoid lock (de-energize solenoid to unlock). The mechanical lock prevents the swing door from accidently being opened if no power is present to the system or a temporary power loss occurs. A manual override is integrated into the interlock for emergency use. The Relialign CDI Series solenoid circuit is further refined to include integral switches which permit power to be applied to the solenoid “only” when unlocking the door. This unique solenoid circuit may reduce the complexity of the host controller and extend the life of the solenoid, since power is applied only when the door is beginning to open. • Certified to applicable sections of ASME A17.1, ASME A18.1, and UL 104 • Two separate independent switches to provide door closed and door locked; factory wired for series or parallel configurations • No exposed switch contacts • Key-to cam engagement design and snap action switches minimize nuisance stops • Rugged die-cast metal housing with electrostatic epoxy coating for enhanced durability and choice of several colors • Life of one million cycles minimum • Solenoid accepts 24 Vac or Vdc • Electrical connection choice of terminal strip or RJ-45 Cat 5 termination • Required to mount in vertical position POTENTIAL APPLICATIONS USA: Swing/Hinge Doors Commercial & residential elevators Commercial & residential dumbwaiters Platform/ material lifts Mobility impaired lifts Canada: Swing/Hinge Doors VALUE TO CUSTOMERS • Certified to ASME and UL codes • Easier installation with terminal strip or Cat 5 wire connection • Interlock accepts for 24 Vac or 24 Vdc signal • Internal custom control of solenoid for increased life which may reduce complexity of host controller and potential “time outs” for door interlock from host controller DIFFERENTIATION • Exceeds commercial pull force requirement of 675 lb with a 2X margin with use of high strength stainless steel solenoid plunger, cam, and key • No exposed or open electrical contacts • White electrostatic epoxy finish on metal housing to harmonize with equipment architecture Sensing and Internet of Things Commercial & residential elevators Commercial & residential dumbwaiters Platform/ material lifts PORTFOLIO Honeywell also manufactures a Residential Door Interlock (RDI) for commercial applications. Relialign Commercial Door Interlock Switches, CDI Series Table 1. Specifications Characteristic Parameter Product type Relialign Electromechanical Door Interlock, CDI series Mounting Vertical mounting required for gravity to operate de-energized solenoid plunger Interlock override option Certifications Mechanical override standard on CDI door interlocks ANSI/ASME, cULus ANSI/ASME A17.1 (Safety Code for Elevators & Escalators) ANSI/ASME A18.1 (Safety Standard for Platform Lifts and Stairway Chairlifts) UL 104 (Standard for Elevator Door Locking Devices) CAN/CSA B44 (Safety Code for Elevators & Escalators) Die-cast metal housing with zinc phosphate treatment & electrostatic epoxy coating Stainless steel Exceeds 675 lbs pull force requirement by a 2x factor Two separate independent switches; one switch for door closed, one switch for door locked Factory wired per customer specification in parallel or series for door closed and door locked 24 Vac or 24 Vdc AC, 0.35 A max; DC 0.2 A max MICRO SWITCH snap action Terminal strip or RJ-45 Cat 5 1,000,000 cycles minimum 4 ⁰C to 38 ⁰C [40 ⁰F to 100 ⁰F] -40 ⁰C to 60 ⁰C [-40 ⁰F to 140 ⁰F] Reference standards Housing material Key material Key override force Door indication Wiring for door indication Supply voltage Supply current Internal switches Electrical connection Electrical life Operating temperature Storage temperature Figure 1. Design Features Product listings right or left hand installation Terminal strip interface to PCB for quicker and easier connection Custom solenoid design offers Two snap-action basic universal voltage for switches controlling solenoid. Honeywell ac and dc applications metal cam design Reduces complexity provides positive snap action of host controller Die-cast metal enclosure using current Honeywell limit switch technology Metal key engagement ensures door is held securely closed to reduce alignment issues / Manual override nuisance stoppage features as required by Optional CAT 5 connector is available for customer connection 2 sensing.honeywell.com Snap-action door switch used to monitor door position (open / closed) certain approval agencies Relialign Commercial Door Interlock Switches, CDI Series Figure 2. Product Nomenclature CDI Switch Type CDI Series L Relialign™ Commerical Door Interlock R R B S 1 W Key Entry Position Solenoid Type Wiring Connector Color Left B ac/dc Right P Parallel 1 Terminal strip W White S Series 2 RJ-45 Category 5 connector B Black 3 Other 4 RJ-45 Category 5no solenoid switch 5 Terminal strip no solenoid switch BR Bronze Specials Two characters, letters or numbers to signify customer name or other unique features of the product not covered in the nomenclature. This field is not required. Table 2. Order Guide Catalog LIstings Description CDILBP1W CDI Commercial Door Interlock, left key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, terminal strip connector, housing finish white CDIRBP1W CDI Commercial Door Interlock, right key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, terminal strip connector, housing finish white CDILBP2W CDI Commercial Door Interlock, left key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, RJ-45 Category 5 connector, housing finish white CDIRBP2W CDI Commercial Door Interlock, right key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, RJ-45 Category 5 connector, housing finish white CDILBP2BR CDI Commercial Door Interlock, left key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, RJ-45 Category 5 connector, housing finish architectural bronze CDIRBP2BR CDI Commercial Door Interlock, right key entry, 24 Vac/dc solenoid, door closed and door locked with parallel circuits, RJ-45 Category 5 connector, housing finish architectural bronze CDILBS1W CDI Commercial Door Interlock, left key entry, 24 Vac/dc solenoid, door closed and door locked with series circuits, terminal strip connector, housing finish white CDIRBS1W CDI Commercial Door Interlock, right key entry, 24 Vac/dc solenoid, door closed and door locked with series circuits, terminal strip connector, housing finish white CDILBS2W CDI Commercial Door Interlock, left key entry, 24 Vac/dc solenoid, door closed and door locked with series circuits, RJ-45 Category 5 connector, housing finish white CDIRBS2W CDI Commercial Door Interlock, right key entry, 24 Vac/dc solenoid, door closed and door locked with series circuits, RJ-45 Category 5 connector, housing finish white Table 3. Order Guide (Replacement Actuator Keys) Catalog LIstings Description GKZ91 Replacement actuator key (finish, white) GKZ92 Replacement actuator key (finish, black) GKZ93 Replacement actuator key (finish, architectural bronze) Sensing and Internet of Things 3 Relialign Commercial Door Interlock Switches, CDI Series Figure 3. CDI Left-hand Mounting Dimensions • (For reference only) in .85 1.99 2.79 7.375 ± .007 1.88 1.200 1.47 .500 .25 .76 2.03 2.29 (DOOR SURFACE) (1.200) 2.71 7.125 ` .007 SWITCH SHOWN ACTUATED 8.457 +.040 -.022 (ACTUATOR LOCATION) 6.00 RUBBER BUMPER 6.06 .40 .28 9.75 1.05 8.42 WINDOW MID-POINT .49 (PLUNGER TRAVEL) DOOR SURFACE .44 .30 .31 1.750 1.125 .65 2.5 FRONT OPENING FOR EMERGENCY OVER-RIDE 1.375 .500 TYP 4X Ø 0.190 2X .190 SIDE OPENING FOR EMERGENCY OVER-RIDE KEY (BOTH SIDES) (.863) 1.15 1.44 NOTE: Interlock must be mounted vertically as illustrated. 4 sensing.honeywell.com (.120) (.260) Relialign Commercial Door Interlock Switches, CDI Series Figure 3. CDI Right-hand Mounting Dimensions • (For reference only) in Ø 0.88 .75 .85 1.99 2.79 1.88 1.47 8.42 WINDOW MID-POINT 2.03 2.29 (DOOR SURFACE) 1.200 .76 DOOR SURFACE (1.200) 2.71 .49 (PLUNGER TRAVEL) 6.00 RUBBER BUMPER 7.125 6.06 .40 .28 7.375 .44 9.75 .31 1.05 .30 2.5 1.750 .65 1.375 1.125 8.457 +.040 -.022 (ACTUATOR LOCATION) FRONT OPENING FOR EMERGENCY OVER-RIDE (.863) 1.15 1.44 SIDE OPENING FOR EMERGENCY OVER-RIDE KEY (BOTH SIDES) 2X .190 4X Ø 0.190 .500 TYP (.120) (.260) NOTE: Interlock must be mounted vertically as illustrated. Sensing and Internet of Things 5 Relialign Commercial Door Interlock Switches, CDI Series Figure 5. Wiring Schematic Parallel Connection (CAT 5 connector) ELECTRICAL SCHEMATIC 7 Figure 6. Wiring Schematic Series Connection (CAT 5 connector) ELECTRICAL SCHEMATIC 7 DOOR CLOSED 8 8 3 3 SOLENOID CONTROL 2 5 SOLENOID DOOR LOCKED - Figure 7. CAT 5 Connector Pin Details PIN #1 PIN #8 DOOR CLOSED DOOR LOCKED SOLENOID CONTROL 2 SOLENOID - 6 Figure 8. Wiring Schematic Parallel Connection (6-pin Terminal) Figure 9. Wiring Schematic Series Connection (4-pin Terminal) ELECTRICAL SCHEMATIC 5 ELECTRICAL SCHEMATIC C DOOR CLOSED 4 1 D 2 3 B SOLENOID CONTROL SOLENOID DOOR LOCKED - DOOR CLOSED DOOR LOCKED SOLENOID CONTROL A SOLENOID 6 D C B A 6 5 4 3 2 1 6 sensing.honeywell.com - Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is buyer’s sole responsibility to determine the suitability of the product in the application. m WARNING RISK TO LIFE OR PROPERTY • Never use this product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that this product is property rated and installed for the intended use within the overall system. Failure to comply with these instructions could result in death or serious injury. m WARNING MISUSE OF DOCUMENTATION • • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. For more information Honeywell Sensing and Internet of Things services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or the nearest Authorized Distributor, visit sensing.honeywell.com or call: Asia Pacific +65 6355-2828 Europe +44 1698 481481 USA/Canada +1-800-537-6945 Honeywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 honeywell.com 001042-4-EN | 4 | 03/19 © 2019 Honeywell International Inc. All rights reserved.