HMC5983-EVAL

HMC5983 Evaluation Board The HMC5983 evaluation board for the Compass IC contains the HMC5983 atop a 0.8" by 0.5" plug-board with wide-DIP pins for solder less breadboard compatibility. The evaluation board is configured for dual supply I2C operation and has the capacitors and I2C pull-up resistors required. Device can be configured to Single Supply and SPI modes by changing jumpers on the board. Notes: 1. 2. Top Side 3. The recommended supply voltage is 2.16V ~3.6V for VDD and 1.71V~VDD for VDDIO. For single supply mode, place a jumper across S.S. on bottom side of the board. For SPI mode, switch Mode jumper to SPI. Remove jumpers across I2C on bottom side. For questions about this evaluation board, please contact our applications support at 800-323-8295, option 2, option 1 or by email at ps.customer.support@honeywell.com Honeywell 12001 Highway 55 Plymouth, MN 55441 Tel: 800-323-8295 / 763-954-2474 www.magneticsensors.com Form #900428 September 2011 ©2011 Honeywell International Inc.