HMC6343 Evaluation Board
The HMC6343 evaluation board for the tilt-compensated digital compass IC contains the
HMC6343 mounted on the 0.8" by 0.8" plug-board with wide-DIP spaced (0.6") pins for
solderless breadboard compatibility. The board also contains the external capacitor and
I2C pull-up resistors for typical function of the compass. The board contains the four
connections (VDD, GND, SCL, and SDA) plus other breakouts.
Notes:
10.
The HMC6343 operates best on
three volt logic interfaces (VDD=2.7 to
3.3v)
11.
There are two 10k ohm pull-up
resistors on the SDA and SCL serial
bus lines. Also a 0.1uf capacitor is
included for VDD supply decoupling.
12.
The remaining unmarked pins
are recommended to be open circuited.
They are factory test points.
Honeywell
12001 Highway 55
Plymouth, MN 55441
Tel: 800-323-8295
www.magneticsensors.com
For questions about this demonstration board,
please contact our applications support at
800-323-8295, option 2, option 1 or by email at
ps.customer.support@honeywell.com
Form #900391
October 2012
©2008 Honeywell International Inc.
很抱歉,暂时无法提供与“HMC6343-EVAL”相匹配的价格&库存,您可以联系我们找货
免费人工找货