HOA1405

HOA1405 Reflective Sensor FEATURES • Phototransistor output • Focused for maximum response • Ambient light and dust protective filter INFRA-68.TIF DESCRIPTION The HOA1405 series consists of an infrared emitting diode and an NPN silicon phototransistor encased sideby-side on converging optical axes in a black thermoplastic housing. The phototransistor responds to radiation from the IRED only when a reflective object passes within its field of view. The HOA1405 series employs an IR transmissive filter to minimize the effects of visible ambient light and to provide a smooth optical face which prevents the accumulation of airborne contaminants in the optical path. The HOA1405 series contains plastic molded components. For additional component information see SEP8505 and SDP8405. Housing material is polyester. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.010(0.25) 2 plc decimals ±0.020(0.51) .340(8.64) .330(8.39) .200(5.08) MIN .260(6.60) .240(6.10) C E .405(10.29) .395(10.04) .210(5.33) .190(4.83) .062(1.60) R 2 PLCS .370(9.40) .360(9.14) .680(17.27 .660(16.76 .130(3.30) .120(3.05) .025(0.64) .015(0.39) K A .20(5.08) TESTSURFACE .610(15.49) .590(14.97) .910(23.11) .890(22.61) DOTINDICATES IRED SIDE DIM_032.ds4 252 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA1405 Reflective Sensor ELECTRICAL CHARACTERISTICS PARAMETER IR EMITTER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS DETECTOR COUPLED CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS (25¡C Free-Air Temperature unless otherwise noted) Operating Temperature Range Storage Temperature Range Soldering Temperature (5 sec) IR EMITTER Power Dissipation Reverse Voltage Continuous Forward Current DETECTOR Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation Notes 1. Derate linearly at 0.18 mW/¡C above 25¡C. SCHEMATIC -40¡C to 85¡C -40¡C to 85¡C 240¡C 70 mW [À] 3V 50 mA 30 V 5V 70 mW [À] Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 253 HOA1405 Reflective Sensor Fig. 1 IRED Forward Bias Characteristics gra_073.ds4 Fig. 2 Non-Saturated Switching Time vs Load Resistance 100 gra_074.ds4 100 90 80 70 60 50 40 30 20 10 0 0.8 Forward current - mA TA = 80°C TA = 25°C TA = -40°C 1.0 1.2 1.4 1.6 1.8 2.0 Respons e time - µs Pulsed condition 10 1 10 100 1000 10000 Forward voltage - V Fig. 3 Dark Current vs Temperature Fig. 4 gra_301.cdr Load resistance - Ohms Collector Current vs Ambient Temperature 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 gra_076.ds4 Normalized collector current 100 Free-air temperature - °C Fig. 5 Collector Current vs Distance to Reflective Surface 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.00 Fig. 6 gra_090.ds4 Collector Current vs IRED Forward Current 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0.00 0 10 20 30 40 gra_091.ds4 IF = 30 mA VCE = 5.0 V Normalized collector current Normalized collector current VCE = 5V d = 0.2 in. 0.05 0.10 0.15 0.20 0.25 0.30 50 Distance to reflective surface - inches All Performance Curves Show Typical Values IRED forward current - mA• 254 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA1405 Reflective Sensor Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 255