HOA1881-013

Datasheet -- HOA1881-012 HOA1881-012 HOA Series Transmissive Sensor, Transistor Output, Plastic Package Features ● ● Representative photograph, actual product appearance may vary. Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. ● ● Choice of phototransistor or photodarlington output 0.060 in [1.52 mm] dia. detector aperture 0.125 in [3.18 mm] slot width 18.0 in [457 mm] min. 22 AWG UL 1429 wire leads Description The HOA1881 series consists of an infrared emitting diode facing an NPN silicon phototransistor (HOA1881-011, -012)or photodarlington (HOA1881-013)encased in a black thermoplastic housing. Detector switching takes place whenever an opaque object passes through the slot between emitter and detector. The lead wires of minimum length 18.0 in (457 mm) provide alternate electrical connection when PC board mounting is not possible. The HOA1881 series employs plastic molded components. For additional component information see SEP8506, SDP8406, and SDP8106. Housing material is nylon. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. Wire color code and functions are: Black - IRED Anode Orange - Detector Collector Brown - IRED Cathode Red - Detector Emitter HOA1881-012 HOA Series Transmissive Sensor, Transistor Output, Plastic Package file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20HOA1881-012.htm (1 of 5)13/03/2005 03:23:00 ã Datasheet -- HOA1881-012 Product Specifications Product Type IR Switch On-State Collector Current 1.80 mA Output Transistor Package Components Plastic Package Color Black Forward Current 20 mA Continuous Forward Current 50 mA Forward Voltage 1.6 V Reverse Breakdown Voltage 3V Reverse Current 10 µA Housing Material Nylon Rise and Fall Time 15 µs Power Dissipation 100 mW Operating Temperature Range -40 °C to 85 °C [-40 °F to 185 °F] Dark Current 100 nA Collector DC Current 30 mA Collector-Emitter Breakdown Voltage 30 V Emitter-Collector Breakdown Voltage 5V Collector-Emitter Saturation Voltage 0.4 V Detector Color Orange IRED Anode Color Black IRED Cathode Color Brown Detector Emitter Color Red Availability Global Product Name Transmissive Sensor Sensor Aperture 1,52 mm [0.060 in] dia. Slot Width 3,18 mm [0.125 in] HOA1881-012 HOA Series Transmissive Sensor, Transistor Output, Plastic Package file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20HOA1881-012.htm (2 of 5)13/03/2005 03:23:00 ã Datasheet -- HOA1881-012 HOA1881-012 HOA Series Transmissive Sensor, Transistor Output, Plastic Package file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20HOA1881-012.htm (3 of 5)13/03/2005 03:23:00 ã Datasheet -- HOA1881-012 HOA1881-012 HOA Series Transmissive Sensor, Transistor Output, Plastic Package PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20HOA1881-012.htm (4 of 5)13/03/2005 03:23:00 ã Datasheet -- HOA1881-012 MISUSE OF DOCUMENTATION ● ● The information presented in this product sheet (or catalog) is for reference only. DO NOT USE this document as product installation information. Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. © Copyright Honeywell Inc.1998-2004 All rights reserved. file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20HOA1881-012.htm (5 of 5)13/03/2005 03:23:00 ã