HOA2004-001

HOA2004 Transmissive Optoschmitt Sensor FEATURES • Direct TTL interface • Buffer logic • Side mount package • 0.125 in.(3.18 mm) slot width INFRA-67.TIF DESCRIPTION The HOA2004 consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 kì (nominal) pullup resistor. The buffer logic provides a high output when the optical path is clear, and a low output when the path is interrupted. The side mounting package is useful in applications in which the interruptive element is parallel to the mounting plane. Both emitter and detector have a 0.020 in.(.508 mm) x 0.040 in.(1.02 mm) vertical aperture. The narrow aperture is ideal for use in applications in which maximum position resolution is desired. The HOA2004 employs plastic molded components. For additional component information see SEP8506 and SDP8600. OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.010(0.25) 2 plc decimals ±0.020(0.51) Housing material is polyester. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. DIM_065.ds4 368 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA2004 Transmissive Optoschmitt Sensor ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS IR EMITTER DETECTOR COUPLED CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS SCHEMATIC (25¡C Free-Air Temperature unless otherwise noted) Operating Temperature Range Storage Temperature Range Soldering Temperature (5 sec) IR EMITTER Power Dissipation Reverse Voltage Continuous Forward Current DETECTOR Supply Voltage Output Sink Current Duration of Output Short to VÙÙ or Ground Honeywell reserves the right to make changes in order to improve design and supply the best products possible. -40¡C to 70¡C -40¡C to 85¡C 240¡C 100 mW [À] 3V 50 mA 12 V [Á] 18 mA 1.0 sec. h 369 HOA2004 Transmissive Optoschmitt Sensor SWITCHING WAVEFORM Fig. 1 IRED Forward Bias Characteristics gra_073.ds4 Forward current - mA cir_013.cdr 100 90 80 70 60 50 40 30 20 10 0 Pulsed condition TA = 80°C TA = 25°C TA = -40°C 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward voltage - V Fig. 2 IRED Trigger Current vs Temperature gra_098.ds4 •Normalized trigger current 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -75 -50 -25 0 25 50 75 100 125 Ambient temperature - °C All Performance Curves Show Typical Values 370 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA2004 Transmissive Optoschmitt Sensor Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 371