HSCMRNN001BG2A5

HSC Series – High Accuracy Plastic Silicon Pressure Sensors ±1 % Total Error Band, Digital Output, SMT and DIP, 60 mbar to 10 bar DESCRIPTION The High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive plastic silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 2 kHz. The HSC Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. FEATURES Industry-leading long-term stability Extremely tight accuracy of ±0.25 % FSS BFSL* Total error band of ±1 % full scale span maximum Modular and flexible design offer customers a variety of package styles and options, all with the same industryleading performance specifications • Miniature 10 mm x 12.5 mm [0.39 in x 0.49 in] package • Low operating voltage • Extremely low power consumption • Ratiometric 12-bit analog output • Precision ASIC conditioning and temperature compensated over 0 °C to 50 °C [32 °F to 122 °F] temperature range • • • • These sensors measure absolute, differential, and gage pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Differential versions allow application of pressure to either side of the sensing diaphragm. Gage and compound versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. The HSC Series sensors are intended for use with noncorrosive, non-ionic working fluids such as air and dry gases. They are designed and manufactured according to standards in ISO 9001. • • • • • • • • RoHS compliant Virtually insensitive to mounting orientation Internal diagnostic functions increase system reliability Also available with I2C and SPI digital output, and in SMT and DIP packages Absolute, differential, gage and compound types Pressure ranges from 60 mbar to 10 bar (1 psi to 150 psi) Custom calibration available Various pressure port options * Full Scale Span Best Fit Straight Line HSC Series High Accuracy Plastic Silicon Pressure Sensors • POTENTIAL APPLICATIONS Medical: Airflow monitors Anesthesia machines Blood analysis machines Gas chromatography Gas flow instrumentation Kidney dialysis machines Oxygen concentrators Pneumatic controls Respiratory machines Sleep apnea equipment Ventilators Table 1. Absolute Maximum Ratings1 Parameter Supply voltage (Vsupply) Voltage on any pin Digital interface clock frequency 2 IC SPI ESD susceptibility (human body model) Storage temperature Peak reflow temperature Peak reflow duration Table 2. Operating Specifications Parameter Supply voltage (Vsupply)2 3.3 V 5.0 V • Industrial: Barometry Flow calibrators Gas chromatography Gas flow instrumentation HVAC Life sciences Pneumatic controls Min. -0.3 -0.3 Max. 6.0 Vsupply + 0.3 Unit V V 100 50 3 -40 [-40] - 400 800 ­ 85 [185] 250 [482] 15 kHz kV ° C [° F] ° C [° F] s Min. Typ. Max. Unit 3.0 4.75 3.33 5.03 3.3 5.25 Vdc ­ 0 [32] -20 [-4] ­ ­ ­ 0.8 1 ­ ­ 12 1.6 2 ­ ­ 2.8 0.46 ­ ­ ­ ­ ­ 2.1 3 50 [122] 85 [185] 7.3 ­ 0.2 ­ ­ ±0.25 ±1 ­ Sensors are either 3.3 or 5.0 V based on model selected Supply current 3.3 V supply 5.0 V supply Compensated temperature range4 Operating temperature range5 Startup time (power up to data ready) Response time I2C or SPI voltage level low I2C or SPI voltage level high Pull up on SDA and SCL (I2C output only) Accuracy6 Total error band7 Output resolution Table 3. Environmental Specifications Parameter Humidity Vibration Shock Life9 2 www.honeywell.com/sensing Characteristic 0 % to 95 % RH, non-condensing MIL-STD-202F, Curve AK (20.7 g random) MIL-STD-202F, Method 213B, Condition F 1 million cycles minimum mA ° C [° F] ° C [° F] ms ms Vsupply Vsupply kOhm %FSS BFSL %FSS8 bits ±1 % Total Error Band, SMT and DIP, Digital Output, 60 mbar to 10 bar Table 4. Wetted Materials10 Parameter Port 1 (Pressure Port) Port 2 (Reference Port) Covers high temperature polyamide high temperature polyamide Substrate alumina ceramic alumina ceramic Adhesives epoxy, RTV epoxy, RTV Electronic components ceramic, glass, solder, silicon silicon, glass, gold, solder Notes: 1. Absolute maximum ratings are the extreme limits the device will withstand without damage. 2. Ratiometricity of the sensor (the ability of the device to scale to the supply voltage) is achieved within the specified operating voltage for each option. Other custom supply voltages are available, please contact Honeywell Customer Service. 3. The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure. 4. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits. 5. The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not remain within the specified performance limits. 6. Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at 25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability. 7. Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range. Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis. 8. Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax) and minimum (Pmin) limits of the pressure range. (See Figure 1 for ranges). 9. Life may vary depending on specific application in which sensor is utilized. 10. Contact Honeywell Customer Service for detailed material information. Honeywell Sensing and Control 3 HSC Series High Accuracy Plastic Silicon Pressure Sensors Figure 1. Nomenclature and Order Guide Notes: 11. The transfer function limits define the output of the sensor at a given pressure input. By specifying Pmin and Pmax, the output at Pmin and Pmax the complete transfer function of the sensor is defined. See Figure 2 for a graphical representation of the transfer function. Other transfer functions are available. Contact Honeywell Customer Service for more information. 12. The output type defines which protocol the sensor uses to communicate. Available protocols are I2C and half duplex SPI (slave only). Communication protocol is not field-selectable and should be defined when ordering the sensor. 13. Custom pressure ranges are available. Contact Honeywell Customer Service for more information. 14. See Table 5 for an explanation of sensor types. 4 www.honeywell.com/sensing ±1 % Total Error Band, SMT and DIP, Digital Output, 60 mbar to 10 bar Figure 2. Transfer Functions and Limits Figure 3. Completed Catalog Listing Example HSCMANN010BGSA3: SMT, AN ports, no diagnostics, 10 bar gage sensor, 10 % to 90 % calibration at 3.3 V, SPI output. HSCMANN010BGSA3 Output vs. Pressure 14 Output (% of 2 counts) 100 90 80 1 % FSS Total Error Band 70 60 50 40 30 20 10 0 0 2 4 6 8 10 Pressure (bar) Table 5. Sensor Types Pressure Type Absolute Compound Differential Gage Description Output is proportional to the difference between applied pressure and a built-in reference to vacuum. Pmin is set at absolute zero pressure (full vacuum). Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure. Pmin is set at -1 bar G, referenced to atmospheric pressure. Output is proportional to the difference between the pressures applied to each port. (Port1 – Port2) 50% point of transfer function set at Port1 = Port2. Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure. Pmin is set at atmospheric pressure. Table 6. Sensor Output at Significant Percentages % Output Digital Counts (decimal) 0 0 10 1638 50 8192 90 14746 100 16383 Digital Counts (hex) 0x0000 0x0666 0x2000 0x399A 0x3FFF Honeywell Sensing and Control 5 HSC Series High Accuracy Plastic Silicon Pressure Sensors Table 7. Pressure Range Specifications Pressure Range Pressure Range Order Code Pmin Pmax 600AM 001AB 1.6AB 2.5AB 004AB 006AB 010AB 0 mbar A 0 bar A 0 bar A 0 bar A 0 bar A 0 bar A 0 bar A 600 mbar A 1 bar A 1.6 bar A 2.5 bar A 4 bar A 6 bar A 10 bar A 060MD 100MD 160MD 250MD 400MD 600MD 001BD -60 mbar -100 mbar -160 mbar -250 mbar -400 mbar -600 mbar -1 bar 60 mbar 100 mbar 160 mbar 250 mbar 400 mbar 600 mbar 1 bar 060MG 100MG 160MG 250MG 400MG 600MG 001BG 1.6BG 2.5BG 004BG 006BG 010BG 0 mbar to 0 mbar to 0 mbar to 0 mbar to 0 mbar to 0 mbar to 0 bar 0 bar 0 bar 0 bar 0 bar 0 bar 60 mbar 100 mbar 160 mbar 250 mbar 400 mbar 600 mbar 1 bar 1.6 bar 2.5 bar 4 bar 6 bar 10 bar Overpressure14 Absolute 2 bar A 2 bar A 4 bar A 6 bar A 8 bar A 17 bar A 17 bar A Differential 500 mbar 500 mbar 500 mbar 1.4 bar 1.4 bar 2 bar 2 bar Gage 500 mbar 500 mbar 500 mbar 1.4 bar 1.4 bar 2 bar 2 bar 4 bar 6 bar 8 bar 17 bar 17 bar Compound 6 bar 8 bar 17 bar 17 bar Burst Pressure15 Common Mode Pressure16 Long-term Stability (1000 hr, 25 °C [77 °F]) 4 bar A 4 bar A 8 bar A 8 bar A 16 bar A 17 bar A 17 bar A NA NA NA NA NA NA NA ±0.35 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % 700 mbar 700 mbar 700 mbar 2.5 bar 2.5 bar 4 bar 4 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar ±0.35 % ±0.35 % ±0.35 % ±0.35 % ±0.35 % ±0.25 % ±0.25 % 700 mbar 700 mbar 700 mbar 2.5 bar 2.5 bar 4 bar 4 bar 8 bar 8 bar 16 bar 17 bar 17 bar 3.5 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar 16 bar 17 bar 17 bar ±0.35 % ±0.35 % ±0.35 % ±0.35 % ±0.35 % ±0.35 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % ±0.25 % -1 bar 2.5 bar 8 bar 10 bar ±0.25 % 2.5BC -1 bar 4 bar 16 bar 16 bar ±0.25 % 004BC -1 bar 6 bar 17 bar 17 bar ±0.25 % 006BC -1 bar 10 bar 17 bar 17 bar ±0.25 % 010BC Notes: 15. Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned to the operating pressure range. Exposure to higher pressures may cause permanent damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with the operating temperature range. 16. Burst pressure: The maximum pressure that may be applied to any port of the product without causing escape of pressure media. Product should not be expected to function after exposure to any pressure beyond the burst pressure. 17. Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor without causing changes in specified performance. Table 8. Pinout for All Port Styles 6 Output Type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 I2C ground Vsupply SDA SCL NC NC NC NC SPI ground Vsupply MISO SCLK SS NC NC NC www.honeywell.com/sensing ±1 % Total Error Band, SMT and DIP, Digital Output, 60 mbar to 10 bar Figure 4. Package Dimensional Drawings (For reference only: mm [in]) (Other package combinations are possible, please contact Honeywell Customer Service.) SMT NN Pressure Port: Flat Covers, No Pressure Port SMT AN Pressure Port: Axial, Single Port Honeywell Sensing and Control 7 HSC Series High Accuracy Plastic Silicon Pressure Sensors Figure 4. Package Dimensional Drawings (continued) SMT RN Pressure Port: Radial, Single Port SMT RR Pressure Port: Radial, Dual Ports on Same Side 8 www.honeywell.com/sensing ±1 % Total Error Band, SMT and DIP, Digital Output, 60 mbar to 10 bar Figure 4. Package Dimensional Drawings (continued) SMT DR Pressure Port: Radial, Dual Ports on Opposite Sides DIP NN Pressure Port: Flat Covers, No Pressure Port Honeywell Sensing and Control 9 HSC Series High Accuracy Plastic Silicon Pressure Sensors Figure 4. Package Dimensional Drawings (continued) DIP AN Pressure Port: Axial, Single Port DIP RN Pressure Port: Radial, Single Port 10 www.honeywell.com/sensing ±1 % Total Error Band, SMT and DIP, Digital Output, 60 mbar to 10 bar Figure 4. Package Dimensional Drawings (continued) DIP RR Pressure Port: Radial, Dual Ports on Same Side DIP DR Pressure Port: Radial, Dual Ports on Opposite Sides Honeywell Sensing and Control 11 WARNING WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Asia Pacific Europe Latin America USA/Canada Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com 008164-2-EN IL50 GLO Printed in USA July 2009 © 2009 Honeywell International Inc. +65 6355-2828; +65 6445-3033 Fax +44 (0) 1698 481481; +44 (0) 1698 481676 Fax +1-305-805-8188; +1-305-883-8257 Fax +1-800-537-6945; +1-815-235-6847 +1-815-235-6545 Fax