LGRTA3CB01-000

GAPS & HAPS SERIES 000843 Issue 1 Aerospace Proximity Sensors DESCRIPTION Honeywell has over 30 years’ experience designing and delivering accurate and reliable proximity sensors that are currently used in a variety of military and commercial aircraft. Honeywell has two new platforms of proximity sensors: General Aerospace Proximity Sensors (GAPS) and Harsh Aerospace Proximity Sensors (HAPS), formerly known as the IHM Series. Both platforms incorporate Honeywell’s patented Integrated Health Monitoring functionality, however the products have some technical differences that allow them to be used in various aerospace applications. GAPS can be used in less harsh areas of application with some differences of electrical and environmental characteristics when compared to HAPS. Whilst, HAPS Aerospace Proximity Sensors are configurable, non-contact, hermetically sealed devices designed to sense the presence or absence of a target in harshduty aircraft applications. The GAPS and HAPS platforms provide on/off outputs and can be configured with an optional health monitoring output to the host system. The sensing mechanism is based on the familiar Eddy Current Killed Oscillator (ECKO) principles; however, Honeywell has designed and implemented the patented FAVCO (Fixed Amplitude Variable Current Oscillator) technology which enables the Honeywell sensors to have the health monitoring (IHM) features. See Figure 5 to compare the ECKO and FAVCO technologies. The GAPS and HAPS Series helps to reduce downtime and maintenance costs due to a unique circuit that can detect any internal failures and display a fault output instead of a false positive or false negative. For the customer, this delivers the best performance with a lower overall cost over the life of the aircraft. FEATURES • Industry-leading indirect lightning and dielectric ruggedness: Meets the increased requirements of today’s composite aircraft and most challenging applications including landing gear, thrust reversers, and flight controls • Enhanced vibration ruggedness: Capable of withstanding extremely high vibration applications • Environmentally rugged: Fully hermetic packages provide long-term reliability in very harsh environments by eliminating the potential for contamination of the sensor from the application environment. In addition, Honeywell has developed an innovative method to environmentally seal wire-lead (pigtail) configurations • Integral Health Monitoring Capability: Optional third output state to indicate the health of the sensor (whether it is healthy or failed). Reduces maintenance time, reduces delayed flights, and lowers overall maintenance cost across the life of the aircraft • Non-contact design: Utilizes noncontact technology to sense the presence or absence of a target regardless of the dirty, harsh environment in which it is placed, eliminating mechanical failure mechanisms, reducing wear, minimizing downtime, increasing durability, and increasing reliability VALUE TO CUSTOMERS • Enhanced vibration and EMI specifications help to increase revenue (flight hours) and reduce cost to serve (system maintenance) • Hermetic sealing helps increase revenue (flight hours), reduce cost to serve (maintenance), & reduce cost of goods (spares) • Platform approach helps to increase revenue and reduce cost to serve • Health monitoring helps to increase revenue, reduce cost to serve, and reduce cost of goods • Supplier stability helps to reduce cost to serve (troubleshoot with original supplier) • Current install base helps to reduce cost to serve (proven performance and MTBF) PORTFOLIO Honeywell’s GAPS and HAPS Series is part of a comprehensive line of aerospace sensors, switches, and value-added solutions. To view Honeywell’s complete product offering, click here. AEROSPACE PROXIMITY SENSORS, GAPS & HAPS SERIES GAPS Landing Gear GAPS Doors GAPS Ground Vehicles HAPS Airframe GAPS HAPS GENERAL Aerospace Proximity Sensor Hydraulics GAPS Primary Surface Rear Stabilizer GAPS GAPS Gen Actuators GAPS Rotary Actuators Evacuation Slides Cargo Storage Turbine Speed/ACM GAPS GAPS GAPS GAPS GAPS 500,000 DIFFERENTIATORS MTBF > FLIGHT HOURS HARSH Application Proximity Sensor TRAS HAPS Valves HAPS Engine HAPS Actuators HAPS Nacelle HAPS Canopies HAPS HAPS 500,000 MECHANICAL CHARACTERISTICS OPERATING TEMPERATURE 115°C 20 G VIBRATION 20 G* 40 G OPERATING SHOCK 20 G 115°C ELECTRICAL CHARACTERISTICS 150 mA Level W RADIO FREQUENCY CONDUCTED SUSCEPTIBILITY 300 mA Level Y 100 V/m CAT F RADIO FREQUENCY RADIATED SUSCEPTIBILITY 200 V/m CAT G Level 3 ON/OFF 20 mA 1000 Vdc/750 Vac 2 sensing.honeywell.com LIGHTNING INDUCED TRANSIENT Level 3 SUSCEPTIBILITY OUTPUT TYPE DIELECTRIC/IR IHM ON/OFF 250 mA 500 Vdc/500 Vac * HAPS has a Q factor of 4. Contact Honeywell for more information. AEROSPACE PROXIMITY SENSORS, GAPS & HAPS SERIES TABLE 1. GAPS SERIES AND HAPS SERIES PERFORMANCE SPECIFICATIONS CHARACTERISTIC PARAMETER Mechanical Characteristics GAPS HAPS Weight Less than 60 grams (inline variants); 85 grams (right-angle variants) 60 g to 150 g Sealing Hermetically sealed Hermetically sealed, pigtail versions environmentally sealed Connector/leads D38999/25YA98PN D38999/25YA98PA EN2997Y10803MN • D38999/25YA98PN • EN2997Y10803MN • M83723/90Y10056 • M83723/90Y10058 Form factor • Inline, cylindrical, threaded • Right angle, cylindrical, threaded • Inline, cylindrical, flanged • Right angle, cylindrical, flanged • Inline, cylindrical, threaded • Right angle, cylindrical, threaded • Inline, cylindrical, flanged • Right angle, cylindrical, flanged Sensing distance 3,5 mm max. 4 mm max. Sensing face Inconel Inconel® Outer body material Stainless steel Stainless steel Sensor head diameter 13,5 mm [0.53 in] 13,5 mm [0.53 in] Sensor length 55 mm [2.17 in] max. various; 60 mm [2.36 in] max. Target (typical) SS 17-4PH rectangular target with dimensions 25 mm x 18 mm x 3 mm [0.98 in x 0.71 in x 0.12 in] SS 17-4PH rectangular target with dimensions 25 mm x 18 mm x 3 mm [0.98 in x 0.71 in x 0.12 in] MTBF 500,000 flight hours 500,000 flight hours Electrical Characteristics GAPS HAPS Supply voltage 12 Vdc to 32 Vdc (input) 12 Vdc to 28 Vdc Supply current