SOFTWARE VERSION 3.0 IS NOW SHIPPING
IN THE HGUIDE n580 NAVIGATOR
We’re pleased to announce that a new software update is now shipping in
the Honeywell HGuide n580 navigator. Many of these new features were
previously only available in our Aerospace navigator product line. The
HGuide development team has adapted Honeywell’s proven algorithms
for use in the HGuide n580 as part of our continuing goal to bring you
Aerospace performance at Industrial prices.
VERSION 3.0 CONTAINS THE FOLLOWING IMPROVEMENTS:
• Wheel Encoder Odometry - Users can now provide encoder pulse
HGuide n580 Navigator
counts using the recently added 0x4110 message.
‒ Customers provide the pulse count and scale factor (distance
travelled per count). Honeywell’s advanced navigation software use
our proprietary algorithms to fuse the installation lever-arm and
odometry measurements with inertial data from the internal HG4930
Inertial Measurement Unit to provide dead reckoning performance of
less than 0.2% distance traveled in GNSS challenged environments
user provided odometry to ensure the device truly
is stationary and then calibrate out inertial sensor
errors that have built up while the vehicle was in
motion. This can dramatically improve the accuracy
of the vehicle’s calculated position.
• Customer Configurable Communication Ports -
such as urban areas or heavily forested regions.
‒ Honeywell’s unique algorithms can estimate the error in the customer
provided scale factor which often arise from changes in tire pressure
or other environmental fluctuations. The HGuide software then
automatically accounts for this change in the scale factor.
‒ The algorithms are also able to estimate error in the customer
provided lever-arms and account for this in the navigation solution.
• Motion Detection - Honeywell’s proprietary algorithms for
Customers can now configure the communication
ports using the added 0x1005 message and
the configurations can be stored to non-volatile
memory (e.g. baud rate).
• Miscellaneous bug fixes and patches.
Please contact your sales representative for
additional information or if you have any questions.
determining when the vehicle is in motion or stationary have also been
We plan to release updated software at regular
added. This algorithm uses the inertial sensors in the HG4930 and the
intervals with additional and improved features.
Honeywell Aerospace
1944 E. Sky Harbor Circle
Phoenix, AZ 85034
aerospace.honeywell.com
N61-2123-000-000 | 03/19
© 2019 Honeywell International Inc.
很抱歉,暂时无法提供与“N580-A253”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+234724.609691+28199.94462