POS187414

PRODUCT OBSOLESCENCE NOTICE This announcement is to inform you that due to the low level of sales and some component shortage, a limited selection of liquid level products will be phased out by the end of this year. Last Time Buy orders will be accepted through March 31, 2017 only, with shipments allowed through Dec 31, 2017. The table below provides information about affected part numbers with suggested replacement parts. Click here to access the replacement product’s datasheet. Obsolete parts FRN12313 FRN12413 FRN21112 FRN22212 LLE101000 LLE101000-109 LLE102000 LLE102000-001 LLE102000-RS LLE103000 LLE103000-RS LLE105000 Replacements None None None None LLE101101 None LLE102101 None LLE102101 LLE103101 LLE103101 LLE105100 Obsolete parts LLE105000-ATN120 LLE205000 LLE305000 LRNH30S11 LRNH30S12 LRNH31S41 LRNH31S42 LRNH40021 LRNH41021 LRNH51024-007 LRNH51S41 LRNH51S42 Replacements None LLE205100 LLE305100 None None None None None None None None None Obsolete parts LRNR31N01 LRNR31S41 LRNR51N01 LRNV30N41 LRNV30S02 LRNV31S41 LRNV31S42 LRNV51S42 POS187311 POS187312 POS187313 POS187314 Replacements None None None None None None None None None None None None Obsolete parts POS187411 POS187412 POS187413 POS187414 POS287311 POS287312 POS287313 POS287314 POS287411 POS287412 POS287413 POS287414 Replacements None None None None None None None None None None None None Product Obsolescence Notice The LLE Series standard temperature liquid level switches are being phased out due to a component shortage affecting the optics (the LED emitter and the photo detector) used in these products. The inventory left for these optics is equivalent to the annual demand on a normal year, but due to the last time buy announcement we expect to deplete this inventory quickly. Therefore, the below mentioned last time buy and shipment dates are indicative only. For these products, the suggested replacements are the high temperature versions of the LLE Series. In most applications, the high temperature versions should be direct drop in replacements. However, some customers will notice the change in supply current in addition to the operating/storage temperature. The high temperature versions use less current, and this may trigger an alarm condition in some applications. Moreover, some customers may use the quiescent current to know that a sensor is still connected and working. LLE Product versions Standard temperature High temperature Supply current 15 mA nominal at +5 Vdc 5 mA nominal at +5 Vdc Operating temperature -25°C to +80° C / -13°F to +176°F -30°C to +85° C / -22°F to +185°F Storage temperature -40°C to +125° C / -40°F to +257°F 40°C to +125° C / -40°F to +257°F For the additional product materials, including manuals, downloads, and sales resources, please visit the liquid level product webpage. REGIONS AFFECTED ☒ Asia Pacific (APAC) ☒ Europe ☒ Middle East, Turkey, Africa (META) ☒ Latin America (LATAM) ☒ North America (NA) Honeywell Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC, 800-537-6945 www.honeywell.com © 2017 Honeywell International Inc. PAGE 2 Product Obsolescence Notice The following timeline pertains to all retired liquid level products. These dates are subject to change based on the optics availability. Last Time Buy Honeywell will not accept hardware orders after this date: Last Time Ship Honeywell will not ship product after this date: Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. Honeywell is committed to providing you with a superior level of customer service. Please visit sensing.honeywell.com or contact your Honeywell representative for additional information regarding this communication. Honeywell Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC, 800-537-6945 www.honeywell.com © 2017 Honeywell International Inc. PAGE 3