SMD2440-002

Infrared Components Ceramic Discrete Surface Mount Emitters and Detectors FEATURES • Small package size • Glass lensed optics for efficient optical coupling • Upright or inverted mounting capability • Low profile, small size for flexible layout of multiple channels and custom arrays • Compatible with automated solder processes: - IR reflow - vapor phase - solder wave - convection oven • Choice of photodiode or phototransistor detectors • IRED features high power dissipation capability • Tape and reel packaging option − pick and place machine compatible APPLICATIONS • Optical encoders for motion control • Computer peripherals • Vending and point-of-sale applications • Smoke detectors • Medical equipment SME/SMD Series The SME2470, SMD2440 and SMD2420 Series surface mount infrared components are small ceramic packages (0.15 x 0.10 x 0.083 in. / 3,81 x 2,54 x 2,1 mm) with glass lenses. The lens minimizes cross talk and often eliminates the need for apertures in non-critical applications. The low profile components may be mounted on the printed circuit board, lens up or inverted, allowing flexibility in layouts for multiple channel and custom arrays. When mounted lens down over a hole in the PC board, the lens is hidden, lowering overall package height. The SME2470 is a high intensity aluminum gallium arsenide infrared emitting diode (IRED) which can be used with either the SMD2440 phototransistor or the SMD2420 photodiode. It supplies optimum optical characteristics and efficient optical coupling. The small size and high power dissipation properties of the IRED promote PC board miniaturization and high density placement. The SMD2440 Series phototransistor’s gain characteristics make it useful for applications requiring high responsivity. The SMD2420 Series photodiode is especially useful in applications requiring linear response or high switching speed. These components are available in bulk, or on tape and reel for use with automatic placement equipment. Honeywell Sensing and Control Infrared Components Ceramic Discrete Surface Mount SME/SMD Series SME2470 SERIES IRED ABSOLUTE MAXIMUM RATINGS CAUTION Power dissipation @ 25 °C* STRESS DAMAGE Functional operation of the device at or above “Absolute Maximum Ratings” for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage. 150 mW Continuous forward current 75 mA (mounted on a PC board) Reverse voltage (IF = 10 µA) 3V Operating free air temperature range -55° to +125°C (-67° to +257°F) Storage temperature -65° to +150°C (-85° to +302°F) Soldering temperature 260°C (500°F), 5 seconds max. *Derate 1.43 mW/°C above 25°C ambient. SME2470 SERIES IRED ELECTRICAL CHARACTERISTICS (at 25°C unless otherwise noted) Parameter Irradiance Sym. H Forward voltage Test Conditions Measured into 0.104 in. (2.64 mm) dia. aperture @ 0.535 in. (13.59 mm) from lens tip. IF = 50 mA IF = 50 mA Min. 0.6 Reverse breakdown voltage IR= 10 µA BVR Peak output wavelength IF = 50 mA λ 880 nm Spectral bandwidth Rise time Fall time IF = 50 mA 10 µsec pulse width tR tF 80 800 700 nm ns ns VF Typ. 1.5 Max. Units 2 mW/cm 1.8 Volts 3.0 Volts 100% 100% 80% 80% Relative Irradiance Relative Irradiance TYPICAL IRED PERFORMANCE CHARACTERISTICS SME2470 Irradiance vs Angular Displacement SME2470 Spectral Bandwidth 60% 40% 20% 0% 760 800 840 880 920 Wavelength - nm 2 Honeywell • Sensing and Control 960 1000 60% 40% 20% 0% -30 -20 -10 0 10 20 30 Angular Displacement - Degrees For application help: call 1-800-537-6945 Infrared Components Ceramic Discrete Surface Mount SME/SMD Series TYPICAL IRED PERFORMANCE CHARACTERISTICS (when solder mounted to PC board) SME2470 Forward Current vs Forward Voltage SME2470 Forward Voltage vs Temperature 1.6 1.55 Forward Voltage - V Forward Voltage - V 1.5 1.4 1.3 1.2 1.1 1.0 0 20 40 60 80 1.50 1.45 1.40 1.35 1.30 -55 100 -10 Forward Current - mA 125 SME2470 Irradiance vs Forward Current 100% Relative Irradiance 200% Normalized Irradiance 80 Temperature - C SME2470 Irradiance vs Temperature 160% 120% 80% 40% 0% -55 35 80% 60% 40% 20% 0% -10 35 80 Temperature - C For application help: call 1-800-537-6945 125 0 10 20 30 40 50 60 70 Forward Current - mA Honeywell • Sensing and Control 3 Infrared Components Ceramic Discrete Surface Mount SME/SMD Series SMD2440 SERIES PHOTOTRANSISTOR ABSOLUTE MAXIMUM RATINGS Collector-Emitter voltage 30 V Emitter-Collector voltage 5V Continuous device dissipation* 125 mW Operating free air range -55° to +125°C (-67° to +257°F) Storage temperature -65° to +150°C (-85° to +302°F) Soldering temperature 260°C (500°F), 5 seconds max. *Derate 1.43 mW/°C above 25°C ambient. SMD2440 SERIES PHOTOTRANSISTOR ELECTRICAL CHARACTERISTICS Parameter Light current Test Conditions -0X1 -0X2 2 VCE = 5 V, H = 1 mW/cm , 880 nm light source Sym. Min. IL 1.5 3.0 Dark current VCE = 10 V, H = 0 ID Collector breakdown voltage IC = 100 µA, H = 0 BVCEO 30 Emitter breakdown voltage IE = 100 µA, H = 0 BVECO 5 Saturation voltage (C to E) IC = 0.04 mA, H = 1 mW/cm 2 Peak response wavelength Rise time VCC = 5 V, RL = 1000 Ω, IL = 1 mA Fall time Typ. Max. Units 4.0 8.0 mA mA 100 nA Volts Volts VCE(SAT) 0.2 0.4 λ 880 nm Volts tR 15 µs tF 15 µs SMD2420 SERIES PHOTODIODE ABSOLUTE MAXIMUM RATINGS Cathode-Anode voltage 50 V Continuous device dissipation* 125 mW Operating free air range -55° to +125°C (-67° to +257°F) Storage temperature -65° to +150°C (-85° to +302°F) Soldering temperature 260°C (500°F), 5 seconds max. *Derate 1.43 mW/°C above 25°C ambient. SMD2420 SERIES PHOTODIODE ELECTRICAL CHARACTERISTICS Parameter Test Conditions Light current VR = 20 V, H = 1 mW/cm * Dark current VR = 20 v, h = 0 ID Reverse breakdown voltage IR = 10 µA, H = 0 BVR Peak response wavelength Rise time Fall time VR = 20 V, RL 100 Ω, IL = 10 µA λ tR tF 2 Sym. Min. IL 6 Typ. Max. Units µA 5 50 nA Volts 880 20 20 nm ns ns *From 880 nm source 4 Honeywell • Sensing and Control For application help: call 1-800-537-6945 Infrared Components Ceramic Discrete Surface Mount SME/SMD Series TYPICAL SMD2440 AND SMD2420 SERIES PERFORMANCE CHARACTERISTICS (when solder mounted to PC board) SMD2440 and SMD2420 Spectral Responsivity SMD2440 and SMD2420 Responsivity vs Angular Displacement 100% 80% Relative Irradiance Relative Response 100% 60% 40% 20% 0% 400 500 600 800 700 80% 60% 40% 20% 0% -40 900 1000 1100 1200 Wavelength - nm -30 -20 -10 0 10 20 40 30 Angular Displacement - Degrees SMD2440 Dark Current vs Temperature SMD2420 Dark Current vs Temperature 100000 100 VCE = 15 V H=0V 1000 Dark Current - nA Dark Current - nA 10000 100 10 1 0.1 10 1.0 0.1 0.01 0.01 0.001 -40 -20 0 20 40 60 80 100 0.001 -55 120 140 35 80 125 Temperature - C Temperature - C SMD2440 Collector Current vs Ambient Temperature SMD2440 Non-saturated Switching Time vs Load Resistance 100 1.6 Response Time - uS Normalized Collector Current -10 1.4 1.2 1.0 0.8 10 1 0.6 0 20 40 60 Ambient Temperature - C For application help: call 1-800-537-6945 80 10 100 1000 10000 Load Resistance - Ohms Honeywell • Sensing and Control 5 Infrared Components Ceramic Discrete Surface Mount SME/SMD Series TYPICAL SMD2440 AND SMD2420 SERIES PERFORMANCE CHARACTERISTICS (when solder mounted to PC board) Normalized Light Current SME to SMD Coupling Characteristics 100% 80% 60% 40% 20% 0% 0.1 0 0.2 0.3 0.4 0.5 0.6 Lens-to Lens Separation - inches SMD2440 Switching Time Test Circuit + SMD2440 Switching Waveform Vcc +5 V Collector 1.0 V 90% GaAs Emitter e0 10% Emitter 250 uS RL 1000 e0 0V tr t tr SMD2420 Switching Time Test Circuit + SMD2420 Switching Waveform VR +20 V Cathode 100% 90% GaAs Emitter e0 10% Anode 10 uS RL 50 e0 0% tr t tr - 6 Honeywell • Sensing and Control For application help: call 1-800-537-6945 Infrared Components Ceramic Discrete Surface Mount SME/SMD Series SME2470, SMD2440, SMD2420 OUTLINE DIMENSIONS in./(mm) (for reference only) Ø 0.068 (1,7) A A Anode (SME2470) Collector (SMD2440) Cathode (SMD2420) SME Cathode (SME2470) Emitter (SMD2440) Anode (SMD2420) Anode 0.040 (1,0) 0.100 (2,5) View A-A 0.015 (0,4) Cathode 0.083 (2,1) SMD 0.150 (3,8) Anode Collector 0.70 (1,8) Emitter Cathode 0.030 (0,8) TAPE AND REEL MOUNTING CONFIGURATIONS: EIA STD 12 mm tape and reel with a 4 mm pitch in.(mm) 0.113 (2,87) 0.085 (2,16) 0.079 ±.002 (2,01 ±,050) SECTION A-A 0.157 (3,99) Ø 0.062 (1,57) 0.010 ±.004 (0,254 ±,15) 0.069 (1,75) 0.472+.012 -.004 A 0.217 ±.002 (5,51 ±,05) A ) (11,98+,30 -,10 0.165 (4,19) VIEW WITH SMD INSTALLED UPRIGHT 0.095 (2,41) 0.157 (3,98) 0.157 (3,99) - RECTANGULAR METALIZED END TOWARDS HOLES - RADIUSED METALIZED END TOWARD EDGE Ø 0.062 +.010 -.000 0.79 ±.002 (2,01 ±,05) (10,13 +,25 -,00 ) Ø 0.062 (10,13) 0.010 ±.004 (0,25 ±,10) 0.069 (1,75) 0.217 ±.002 (5,51 ±,05) 0.472 +.012 -.004 0.165 (4,19) (11,99 +,30 -,10 ) 0.083 (2,11) 0.056 (1,42) 0.048 (1,22) 0.157 (3,99) 0.113 (2,88) For application help: call 1-800-537-6945 VIEW WITH SMD INSTALLED INVERTED 0.106 (2,69) - SQUARE END TOWARD HOLES - ROUND END TOWARD EDGE Honeywell • Sensing and Control 7 Infrared Components Ceramic Discrete Surface Mount ORDER GUIDE Catalog Listing Description SME2470-001 Bulk Packaged, Surface Mount IR Emitter SMD2420-001 Bulk Packaged, Surface Mount Photodiode SMD2440-001 Bulk Packaged, Surface Mount Phototransistor SMD2440-002 Bulk Packaged, Surface Mount Phototransistor SME2470-011 Tape and Reel, Inverted, Surface Mount IR Emitter SMD2420-011 Tape and Reel, Inverted, Surface Mount Photodiode SMD2440-011 Tape and Reel, Inverted, Surface Mount Phototransistor SMD2440-012 Tape and Reel, Inverted, Surface Mount Phototransistor SME2470-021 Tape and Reel Upright, Surface Mount IR Emitter SMD2420-021 Tape and Reel, Upright, Surface Mount Photodiode SMD2440-021 Tape and Reel, Upright, Surface Mount Phototransistor SMD2440-022 Tape and Reel, Upright, Surface Mount Phototransistor WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. HONEYWELL Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006445-2-EN IL50 GLO 199 Printed in USA www.honeywell.com/sensing SME/SMD Series SALES AND SERVICE Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com