SS360NT

32312441 High Sensitivity Latching Digital Hall-effect Issue B Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-LP Datasheet SS460S-T2 SS460S-LP SS460S SS360NT SS360ST SS360ST-10K FEATURES • Fastest response time in its class • No-chopper-stabilization • High sensitivity • Latching magnetics • Wide operating voltage range of 3 Vdc to 24 Vdc • Built-in reverse voltage • Durable design • RoHS-compliant material meets Directive 2002/95 POTENTIAL APPLICATIONS DESCRIPTION The SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, and SS460S-LP High Sensitivity Latching Digital Hall-Effect Sensor ICs are small, sensitive and versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to alternating North and South poles. The SS360NT is turned on by a North pole while the SS360ST, SS460S, SS460S-T2, and SS460S-LP are turned on by a South pole. These sensor ICs offer reliable switching points with a high magnetic sensitivity of 30 G typical (55 G maximum). They do not use chopper stabilization on the Hall element, providing a clean output signal and a faster latch response time when compared to competitive high sensitivity Hall-effect latching sensor ICs which do use chopper stabilization. These products offer reverse polarity protection, deliver a stable output over a -40 °C to 150 °C [-40 °F to 302 °F] temperature range, and can accept any dc supply voltage from 3 Vdc to 24 Vdc. For brushless dc motor manufacturers who need latching sensors with reliable, consistent performance for more efficient and smaller designs, Honeywell’s High Sensitivity Hall-Effect Latching Digital Sensor ICs respond to low magnetic fields and offer consistent repeatability while delivering faster response times to a change in magnetic field for better motor efficiency. These products are available in four package styles: • SS360NT, SS360ST, SS360ST-10K: SOT-23 surface-mount package, pocket tape and reel • SS460S: Flat TO-92-style 14,5 mm [0.57 in] straight standard leads, bulk package • SS460S-T2: Flat TO-92-style 14,5 mm [0.57 in] formed leads, ammopack tape-in-box • SS460S-LP: Flat TO-92-style with straight, long leads, pocket tape and reel Sensing and Productivity Solutions Industrial/commercial • Brushless dc motor commutation • Speed and RPM sensing in electric motors and fans • Tachometer, counter pickup • Robotics control • Flow-rate sensing for appliances Transportation • Brushless dc motor commutation • Electronic window lift, anti-pinch power window systems • Vehicle convertible roof position Medical • Medical equipment using electric motors PORTFOLIO The SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-LP are part of Honeywell’s family of Latching Digital Hall-effect Sensor ICs, including: • SS360PT, SS460P, SS460P-T2 • SS361RT, SS461R • SS361CT, SS461C • SS461A, SS466A High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-LP Table 1. Electrical and Environmental Specifications (At Vs = 3.0 Vdc to 24.0 Vdc, 20 mA load, TA = -40 ºC to 150 ºC [-40 ºF to 302 ºF] except where otherwise specified. Characteristic CCondition Min. Typ. Max. -40 °C to 125 °C [-40 °F to 257 °F] 150°C [302 °F] — 3.0 3.0 3.0 — — — 24.0 12.0 24.0 Supply current Vsupply = 3 Vdc at 25 °C [77 °F] — — — 3.5 — 6.0 8.0 mA Output current — — — 20 mA Gauss > 55 15 mA, Gauss > 55 — — — — 0.6 0.6 V Output leakage current Gauss < -55 — — 10.0 μA Rise/fall time 25 °C [77 °F] — — 1.5 μs single layer, single sided PCB — — — 303 233 — — °C/W Magnetic characteristics: operate (Bop) release (Brp) differential — — — 5 -55 40 30 -30 60 55 -5 80 Operating temperature — -40 [-40] — 150 [302] °C [°F] Storage temperature: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-LP — — -40 [-40] -40 [-40] — — 150 [302] 165 [329] °C [°F] Supply voltage SS360NT, SS360ST, SS360ST-10K SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-LP Vsat: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-LP Thermal resistance: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-LP Soldering temperature and time: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-LP NOTICE These Hall-effect sensor ICs may have an initial output in either the ON or OFF state if powered up with an applied magnetic field in the differential zone (applied magnetic field >Brp and