WPMM1A04A

Wireless Panel-Mount Monitor Limitless™ Monitor DESCRIPTION The new Limitless™ product line combines the best of MICRO SWITCH™ limit switches with the latest commercial off-theshelf wireless technology. The Wireless Panel Mount Monitor will provide a visual, audio and NPN output based on a 0B signal received from a Limitless™ switch. The Wireless Panel Mount Monitor will provide immediate indication of an actuator position change of the wireless limit switch. FEATURES Wireless electrical design • Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point • FCC 15, IC, ACMA and ETSI approvals • EMI immunity • Up to 304 m [1000 ft] line-of-sight communication range when used with a Limitless™ switch (sold separately) • Reliable, flexible, and secure wireless transmission • 10 Vdc to 30 Vdc supply with NPN Normally Open output • Diagnostics options • Can potentially monitor up to 16 wireless switches • Field pairing function allows for rapid configuration (add or subtract switches) Mechanical design • Panel-mount enclosure (snap-in or screw mount) • Polycarbonate, shock resistant, tamper-proof case • Sealed to IP67 • Multiple LED function/status indicators with audible buzzer • Direct or remote mount antenna BENEFITS • Ability to reconfigure and network multiple switches, or point-to-point with personalized addresses which allows for adding, subtracting or relocating Limitless™ switches easily • Reduced installation/maintenance costs with no wiring to Limitless™ switches, conduit, strain relief, clips, connectors, connection boxes, etc. • Snap-in panel or screw mount design allows flexibility in mounting locations • LEDs/buzzer indicate Limitless™ switch actuation, low battery, RF signal loss, pairing function as well as diagnostic functions • Communication security per the IEEE 802.15.4 standard (16-bit PAN (network) ID, 16-bit address and 128-bit security key) POTENTIAL APPLICATIONS • Construction/Ag machines • Valve position • Conveyors • Crane • Remote or temporary equipment boom/jib/skew • Movable machinery position • Grain diverters or flaps • Lifts • Door position • Material • Hose attachment verification handling • Specialty machines • Presses Limitless™ Series Description Product type Series name Availability Housing material Housing type Radio type Antenna type Signal range Supply voltage Supply current Output type Load current Leakage current Voltage drop Terminal(s) Termination Sealing Reverse polarity protection EMC Shock Vibration Operating temperature Agency approvals and standards UNSPSC code UNSPSC commodity Parameter Limitless™ Panel Mount Monitor Series WPMM Series Global, license-free bands LCP, VECTRA E130i Snap-in panel or screw mount design WPAN 802.15.4, 2.4 GHz Direct mount or remote antenna options; Omni directional Nominal 304 m* for International use (Europe and Australia due to signal restrictions); Nominal 1000 ft* for use in US and Canada *clear line of sight between Limitless™ switch and WPMM when using 2.1 dBi integral antenna 10 Vdc to 30 Vdc 750 mA NPN current sinking; normally open 5 mA to 200 mA 50 uA max. 1.75 Vdc max. @ max. load @ 25 °C [77 °F] 3 Quick connect, 0.25 in male blade IP67 Yes Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10 Hz to 500 Hz w/ 0,35 mm peak-to-peak, 58 Hz to 500 Hz- 5g -40 °C to 85 °C [-40 °F to 185 °F] FCC 15.247 Industry Canada RSS 210 ETSI, CE mark ACMA, C-Tick mark 20142601 20142601 * Actual range will vary depending on antenna, cables, and site topography. STANDARD LIMITLESS™ WPMM LISTINGS Part Number WPMM1A02A WPMM1A03A WPMM1A04A WPMM1A05A Description Limitless™ WPMM Series Monitor, 2.1 dBi omni antenna (tilt & swivel design), for use in US/Canada Limitless™ WPMM Series Monitor, 3.0 dBi omni antenna with remote adhesive mounting with 9.8 ft cable, for use in US/Canada Limitless™ WPMM Series Monitor, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting with 5 ft cable, for use in US/Canada Limitless™ WPMM Series Monitor, 5.5 dBi omni antenna (tilt & swivel design) with remote magnetic mounting with 10 ft cable, for use in US/Canada 2 www.honeywell.com/sensing Wireless Limit Switches LIMITLESS WPMM DIMENSIONS WPMM MONITOR NOMENCLATURE Honeywell Sensing and Control 3 Limitless™ Series LIMITLESS™ MOUNTING OPTIONS WAMM100RSP-005/010 Magnetic Antenna Mount WPR1 Panel Mount Retainer WPB1 WPMM Mounting Bracket 4 www.honeywell.com/sensing Wireless Limit Switches LIMITLESS™ WPB BRACKET LIMITLESS™ WPR RETAINER Honeywell Sensing and Control 5 Limitless™ Series LIMITLESS™ ANTENNA OPTIONS LIMITLESS™ ANTENNAS WAN01RSP WAN02RSP Straight Design Tilt and Swivel Direct Mount Design, Direct Mount Connector Antenna WAN05RSP with WAMM100RSP-005 Tilt and Swivel Design, Magnetic Mount Antenna WAN03RSP Flat Design, Adhesive Mount Antenna WAN06RNJ Straight Design, Bracket Mount Antenna 6 www.honeywell.com/sensing Wireless Limit Switches LIMITLESS™ ANTENNA CABLE OPTIONS LIMITLESS™ CABLE ACCESSORIES WCA200RNPRSP-002/010 Cable Assembly Honeywell Sensing and Control 7 Limitless™ Series WARNING 1B WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. SALES AND SERVICE WARNING Honeywell does not recommend using devices for critical control applications where there is, or may be, a single point of failure or where single points of failure may result in an unsafe condition. It is up to the end-user to weigh the risks and benefits to determine if the products are appropriate for the application based on security, safety and performance. Additionally, it is up to the end-user to ensure that the control strategy results in a safe operating condition if any crucial segment of the control solution fails. Failure to comply with these instructions could result in death or serious injury. Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com 002318-1-EN IL50 GLO Printed in USA May 2010 Copyright © 2010 Honeywell International Inc. All rights reserved.