ZM & ZM1
SERIES
004991
Issue 4
MICRO SWITCH Subminiature Switches
FEATURES
VALUE TO CUSTOMERS
• Subminiature package size (19,80 mm
x 10,60 mm x 6,40 mm [0.78 in x
0.42 in x 0.25 in]) allows switch to fit
in applications where other sensor or
switch package size is too large.
• Temperature ranges from -40
°C to 125 °C [-40 °F to 257 °F]
typically allows for years of reliable
performance in harsh conditions
• Well suited for power-duty and logiclevel loads
DESCRIPTION
MICRO SWITCH ZM and ZM1 Series are
subminiature snap action switches from
the Honeywell MICRO SWITCH family
of Z Series subminiature basic switches.
Although small in size, the ZM and ZM1
Series are rated for controlling electrical
loads ranging from logic level (computer
based circuits) to power duty switching
(up to 16.1 A and 250 Vac).
The package size of the subminiature
switch is ideal for applications where
space on the equipment is at a premium.
The overall length of the ZM and ZM1
Series are less than 20 mm [0.78 in]. As
with all snap-action switches, the audible
click when actuated promotes ease of
installation and set-up of the switches.
A wide variety of integral stainless steel
levers are available and when combined
with the subminiature package size,
may adapt the switch to a wide variety
of applications. The ZM Series is
agency certified to UL, cUL and CQC for
worldwide use, while the ZM1 Series is
agency certified to UL, cUL, ENEC, CE,
UKCA and CQC for worldwide use.
• SPDT, SPNC, or SPNO switch options
help assure the circuit requirements
are met
• Switches are built with pin plunger or
various styles of stainless steel levers
• MICRO SWITCH ZM and ZM1 products
are certified per UL; cUL to
UL 61058-1; CE & UKCA to EN 61058-1;
and CQC to GB 15092.1
• Choice of internal switch mechanism:
ZM Series with coil spring design for
increased mechanical life or ZM1
Series with flat spring design for
increased electrical rating
• Current carrying capacity, up to 16.1
A (ZM1 Series), typically allows for a
solution in many applications where
space is a premium
• Wide variety of electrical ratings,
integral actuators, and electrical
terminations to facilitate integration
into control and/or monitoring circuits
POTENTIAL APPLICATIONS
Commercial
• Copy machines: Senses paper position
• Cash registers: Senses drawer open or
closed
• Refrigerators with integral ice makers:
Turns water on-and-off
• HVAC: Senses back pressure in
exhaust outlet
• HVAC: Senses float position for water
level
Medical
• Hospital beds: Senses bed rail position
PORTFOLIO
The ZM and ZM1 Series are
part of the MICRO SWITCH
subminiature basic switch
family that also includes HD,
HD1, SM, SX, ZD, ZW and ZX.
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
TABLE 1. MICRO SWITCH ZM SERIES SPECIFICATIONS
Characteristic
ZM10 Series (Logic Level)
ZM50 Series (Standard Duty)
Circuitry
Operating force
(at pin plunger)
Termination
60 g, 104 g, 146 g, 249 g
104 g, 146 g, 249 g
249 g
Solder (standard and extended), PCB (standard, left, or right)
Sealing
Actuators,
pin plunger standard
Levers (300 series stainless
steel)
ZM90 Series (Power Duty)
SPDT, SPNC, SPNO
IP40
pin plunger, straight lever (5 lengths), simulated roller lever (3 styles), roller lever,
L-shaped lever, special levers
Agency certification
UL, cUL, CQC, RoHS and Reach compliant
Operating temperature
(manufacturer rated)
-40 °C to 125 °C [-40 °F to 257 °F]
Mechanical endurance
(cycles)
5,000,000 min. @ 400 cycles/minute max.
Switch resistance (initial)
100 mΩ max.
100 mΩ max.
Insulation resistance (initial)
Dielectric strength (initial)
(between live parts and ground)
1500 V RMS for one minute (≤0.5 ma leakage current)
Plunger material
PA (nylon)
Case/cover material
Contact material
300 mΩ max.
100 MΩ min. (500 Vdc for 1 minute)
PA (nylon)
gold-plated silver alloy
silver alloy
silver alloy
Note: Refer to engineering drawing for additional information.
TABLE 2. MICRO SWITCH ZM SERIES ELECTRICAL RATINGS
Switch option
ZM10 Series
(Gold-plated silver alloy contacts)
UL/cUL per UL 61058-1
File E12252, Temp 120 °C [248 °F]
CQC per GB15092.1
0 °C to 125 °C [32 °F to 257 °F]
m (micro-disconnection)
0.1 RA 30 Vdc, 10,000 cycles min.
0.1 RA 125/250 Vac, 10,000 cycles min.
0.1 A 30 Vdc
0.1 A 125/250 Vac
10,000 cycles
ZM50 Series
(Silver alloy contacts)
5 RA 30 Vdc, 10,000 cycles min.
5 RA 125/250 Vac, 10,000 cycles min.
5 A 125/250 Vac
10,000 cycles
ZM90 Series
(Silver alloy contacts)
10.1 GPA 125/250 Vac, 10,000 cycles min.
10.1 A 125/250 Vac
10,000 cycles
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 2
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
TABLE 3. MICRO SWITCH ZM1 SERIES SPECIFICATIONS
ZM110 Series, ZM115 Series
(Logic Level)
Characteristic
ZM150 Series, ZM155 Series,
ZM160 Series (Standard Duty)
Circuitry
ZM190 Series, ZM195 Series
(Power Duty)
SPDT, SPNC, SPNO
Operating force (at pin
plunger)
70 g, 95 g, 150 g
Termination
70 g, 95 g, 150 g
ZM190: 150 g, 355 g
ZM195: 355 g
solder (standard and extended); PCB (standard, left, or right), special termination
Sealing
IP40
Actuators,
pin plunger standard
Levers (300 series stainless
steel)
pin plunger, straight lever (5 lengths), simulated roller lever (3 styles), roller lever,
L-shaped lever, special levers
Agency certification
UL, cUL, CQC, ENEC, CE, UKCA, RoHS and Reach compliant
Operating temperature
(manufacturer rated)
Mechanical endurance
(cycles)* 120 cycles/minute
max.
ZM110: -40 °C to 125 °C
[-40 °C to 257 °F]
ZM115: 0 °C to 85 °C
[32 °F to 185 °F]
ZM150, ZM160: -40 °C to 125 °C
[-40 °C to 257 °F]
ZM155: 0 °C to 85 °C
[32 °F to 185 °F]
1,000,000 min.
1,000,000 min.
Switch resistance (initial)
-40 °C to 125 °C
[-40 °C to 257 °F]
ZM190 (150 G OF): 1,000,000 min.
ZM190 (355 g OF): 50,000 min.
ZM195: 50,000 min.
300 mΩ max.
Insulation resistance (initial)
100 MΩ min. (500 Vdc for 1 minute)
Dielectric strength (initial)
(between live parts and
ground)
1500 V RMS for one minute (≤0.5 ma leakage current)
Plunger material
PA (nylon)
Case/cover material
PBT (polyester)
Contact material
Contact material (optional)
PBT (polyester)
PA (nylon)
silver alloy
silver alloy
silver alloy
gold-plated silver alloy (ZM115
only)
gold-plated silver alloy (ZM115
only)
–
Note: Refer to engineering drawing for additional information
*Refer to engineering drawing for additional detail of mechanical endurance
TABLE 4. MICRO SWITCH ZM1 SERIES ELECTRICAL RATINGS
ENEC per IEC 61058-1
μ (Micro-disconnection)
CQC per GB 15092.1
μ (Micro-disconnection)
Switch option
UL/cUL per 61058-1 File E12252
ZM110 Series
0.1 RA 125/250 Vac, 10,000 cycles min.
125 °C [257 °F]
0.1 A 125/250 Vac, 10,000 cycles
-40 °C to 125 °C [-40 °F to 257 °F]
ZM115 Series
0.1 RA 125/250 Vac, 10,000 cycles min.
85 °C [185 °F]
0.1 A 125/250 Vac, 10,000 cycles
0 °C to 85 °C [32 °F to 185 °F]
ZM150 Series
3 RA 125/250 Vac, 10,000 cycles min.
125 °C [257 °F]
3 A 125/250 Vac, 10,000 cycles
-40 °C to 125 °C [-40 °F to 257 °F]
ZM155 Series
3 RA 125/250 Vac, 10,000 cycles min.
85 °C [185 °F]
3 A 125/250 Vac, 10,000 cycles
0 °C to 85 °C [32 °F to 185 °F]
ZM160 Series
6 RA 125/250 Vac, 10,000 cycles min.
125 °C [257 °F]
6 A 125/250 Vac, 6 (2) A 125/250 Vac, 10,000 cycles
-40 °C to 125 °C [-40 °F to 257 °F]
ZM190 Series
10.1 GPA 125/250 Vac, 10,000 cycles min.
125 °C [257 °F]
10.1 A 125/250 Vac, 6 (2) A 125/250 Vac, 10,000 cycles
-40 °C to 125 °C [-40 °F to 257 °F]
ZM195 Series
16.1 GPA 125/250 Vac
10,000 cycles min.
55 °C [131 °F]
16.1 (4) A 125/250 Vac
10,000 cycles
-40 °C to 85 °C [-40 °F to 185 °F]
16.1 A 125/250 Vac
6 (3) A 125/250 Vac
10,000 cycles
-40 °C to 125 °C [-40 °F to 257 °F]
16.1 A 125/250 Vac
6 (3) A 125/250 Vac
10,000 cycles
-40 °C to 125 °C
[-40 °F to 257 °F]
RA – Resistive Amps (Resistive Load), GPA – General Purpose Amps (Inductive Load) , X (Y) – X is max. resistive amps., and (Y) is max. inductive
amps.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 3
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
MICRO SWITCH ZM SERIES PRODUCT NOMENCLATURE
ZM
50
E
10
E
01
Switch Type
Current
Rating
Operating Force
Terminal
Type
Actuator Type
Circuitry
ZM Series
Subminiature 10
Basic
Switch
0.1 A 125 Vac
(Gold-plated
contacts)
50
5 A; 125 Vac/
250 Vac
90
10.1 A; 125 Vac/
250 Vac1
(at pin plunger)
B
D
E
G
D
E
G
60 g max.
104 g max.
146 g max.
249 g max.
G
249 g max.
104 g max.
146 g max.
249 g max.
(Integral Levers)
10
Solder,
straight
A
Pin plunger
01
SPDT
20
PCB, straight
B
Short straight
lever, 16,7 mm
[0.66 in] length
03
SPNO
50
PCB,
right angle
C
04
SPNC
60
PCB,
left angle
D
Standard straight
lever, 18,7 mm
[0.74 in] length
Long straight lever,
24,8 mm [0.98 in]
length
70
Quick connect
0.110 in
E
Stnd sim. roller lever,
18,0 mm [0.71 in]
length, R 2,75 mm
99
SPECIAL2
F
J
Roller lever, 16,6 mm
[0.65 in] length
Ø4,8 mm roller
Small sim. roller lever,
17,9 mm [0.70 in]
length, R 1,3 mm
Extended straight lever,
55,2 mm [2.17 in]
length
K
Straight lever,
35,2 mm [1.39 in]
length
L
L-shaped lever,
31,5 mm [1.24 in]
length
H
—
Special
Designator2
A special designator
character(s) is used
when there is a special
modification to the
switch. A special
designator is required
when Terminal Type
is “99” or Actuator
Type is “S”.
Large sim. roller lever,
Not all combinations of model code are available.
Please contact your Honeywell representative or distributor for assistance.
mm [0.83 in]
M 21,1
length, R 2,45 mm
S
SPECIAL lever2
NOTES:
1
Switches with 10.1 A rating are only available with “G” operating force.
2
Terminal Type “99” or Actuator Type “S” designates a special and therefore requires a special designator
character(s) at the end of the listing.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 4
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
MICRO SWITCH ZM1 SERIES PRODUCT NOMENCLATURE
ZM1
50
C
10
A
01
Switch Type
Current
Rating
Operating Force
Terminal
Type
Actuator
Type
Circuitry
ZM1 Series
Subminiature 10
15
Basic
Switch
50
6
55 6
0.1 A 125 Vac/
250 Vac3
3 A; 125 Vac/
250 Vac3
(at pin plunger)
B
D
C
B
D
C
B
D
C
70 g max.
95 g max.
150 g max.
10
Solder,
straight
A
Pin plunger
01
SPDT
70 g max.
95 g max
150 g max.
20
PCB, straight
B
Short straight
lever, 16,7 mm
[0.66 in] length
03
SPST-NO
50
PCB,
right angle
C
04
SPST-NC
60
PCB,
left angle
D
Standard straight
lever, 18,7 mm
[0.74 in] length
Long straight lever,
24,8 mm [0.98 in]
length
70
Quick connect
0.110 in
E
Stnd sim. roller lever,
18,0 mm [0.71 in]
length, R 2,75 mm
99
SPECIAL2
F
70 g max.
95 g max.
150 g max.
60
6 A; 125 Vac/
250 Vac3
90
10.1 A; 125 Vac/
250 Vac4
C
G
150 g max.
355 g max.
95
16.1 A; 125 Vac/
250 Vac5
G
355 g max.
NOTES:
H
1
Nomenclature is for identification purposes only; not all combinations of model code
are available. Please contact your Honeywell representative or distributor
J
for assistance.
2
Terminal Type “99” or Actuator Type “S” designates a special and therefore requires
a special designator character(s) at the end of the listing.
K
3
Switches with a 0.1 A, 3 A, or 6 A current rating may have an operating force choice
of B (70 g max.), C (150 g max.), or D (95 g max.).
4
Switches with a 10.1 A current rating may only have an operating force of
L
either “C” (150 g max.) or “G” (355 g max.).
5
Switches with a 16.1 A current rating may only have an operating force
M
of “G” (355 g max.).
6
Gold-plated contacts only available with “15” and “55” current rating options.
S
—
Special
Designator2
A special designator
character(s) is used
when there is a special
modification to the
switch. A special
designator is required
when Terminal Type
is “99” or Actuator
Type is “S”.
G - Gold plated
contacts6
Roller lever, 16,6 mm
[0.65 in] length
Ø4,8 mm roller
Small sim. roller lever,
17,9 mm [0.70 in]
length, R 1,3 mm
Extended straight lever,
55,2 mm [2.17 in]
length
Straight lever,
35,2 mm [1.39 in]
length
L-shaped lever,
31,5 mm [1.24 in]
length
Large sim. roller lever,
21,1 mm [0.83 in]
length, R 2,45 mm
SPECIAL lever2
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 5
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
TABLE 5. MICRO SWITCH ZM SERIES PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Pin Plunger
Short
Straight
Lever
(16,7 mm
[0.66 in])
Standard
Straight
Lever
(18,7 mm
[0.74 in])
Termination
Operate Force
max. g [oz]
Release Force
min. g [oz]
Free Position
from
mounting
hole mm [in]
max.
Catalog Listing
Circuitry/
Contact Material
Elect.
Rating
(page 6)
ZM10B10A01
SPDT Gold Plated
0.1 A
Solder
60 [2.17]
8 [0.28]
9,3 [0.37]
ZM10B70A01
SPDT Gold Plated
0.1 A
Long Solder
60 [2.17]
8 [0.28]
9,3 [0.37]
ZM10D70A01
SPDT Gold Plated
0.1 A
Long Solder
104 [3.67]
20 [0.70]
9,3 [0.37]
ZM10E10A01
SPDT Gold Plated
0.1 A
Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM10E20A01
SPDT Gold Plated
0.1 A
PCB (Straight)
146 [5.15]
35 [1.23]
-
ZM10E50A01
SPDT Gold Plated
0.1 A
PCB (90° Right )
146 [5.15]
35 [1.23]
-
ZM10E70A01
SPDT Gold Plated
0.1 A
Long Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM10E70A03
SPNO Gold Plated
0.1 A
Long Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM50E10A01
SPDT Silver Alloy
5A
Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM50E10A03
SPNO Silver Alloy
5A
Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM50E20A01
SPDT Silver Alloy
5A
PCB (Straight)
146 [5.15]
35 [1.23]
-
ZM50E20A03
SPNO Silver Alloy
5A
PCB (Straight)
146 [5.15]
35 [1.23]
-
ZM50E50A01
SPDT Silver Alloy
5A
PCB (90° Right )
146 [5.15]
35 [1.23]
-
ZM50E70A01
SPDT Silver Alloy
5A
Long Solder
146 [5.15]
35 [1.23]
9,3 [0.37]
ZM50G20A01
SPDT Silver Alloy
5A
PCB (Straight)
249 [8.78]
50 [1.76]
-
ZM90G10A01
SPDT Silver Alloy
10.1 A
Solder
249 [8.78]
50 [1.76]
9,3 [0.37]
ZM90G20A01
SPDT Silver Alloy
10.1 A
PCB (Straight)
249 [8.78]
50 [1.76]
-
ZM90G70A01
SPDT Silver Alloy
10.1 A
Long Solder
249 [8.78]
50 [1.76]
9,3 [0.37]
ZM10E10B01
SPDT Gold Plated
0.1 A
Solder
40 [1.41]
6 [0.21]
11,7 [0.46]
ZM10E50B01
SPDT Gold Plated
0.1 A
PCB (90° Right )
40 [1.41]
6 [0.21]
-
ZM10G10B01
SPDT Gold Plated
0.1 A
Solder
66 [2.33]
9 [0.32]
11,7 [0.46]
ZM50D10B01
SPDT Silver Alloy
5A
Solder
30 [1.06]
3 [0.10]
11,7 [0.46]
ZM50E10B01
SPDT Silver Alloy
5A
Solder
40 [1.41]
6 [0.21]
11,7 [0.46]
ZM50E20B01
SPDT Silver Alloy
5A
PCB (Straight)
40 [1.41]
6 [0.21]
-
ZM50E50B01
SPDT Silver Alloy
5A
PCB (90° Right )
40 [1.41]
6 [0.21]
-
ZM50E60B01
SPDT Silver Alloy
5A
PCB (90° Left)
40 [1.41]
6 [0.21]
-
ZM50E70B01
SPDT Silver Alloy
5A
Long Solder
40 [1.41]
6 [0.21]
11,7 [0.46]
ZM10B70C01
SPDT Gold Plated
0.1 A
Long Solder
14 [0.49]
2 [0.07]
12,0 [0.47]
ZM10E10C01
SPDT Gold Plated
0.1 A
Solder
36 [1.27]
6 [0.21]
12,0 [0.47]
ZM10E20C01
SPDT Gold Plated
0.1 A
PCB (Straight)
36 [1.27]
6 [0.21]
-
ZM50E10C01
SPDT Silver Alloy
5A
Solder
36 [1.27]
6 [0.21]
12,0 [0.47]
ZM50E70C01
SPDT Silver Alloy
5A
Long Solder
36 [1.27]
6 [0.21]
12,0 [0.47]
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 6
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Free
Position
max. mm
[in]
from base
of straight
PCB
terminal*
Free Position
from formed
PCB terminal
center line
mm [in]
max. *
Operate point from
mounting hole
mm [in]
Operate point from
base of staight PCB
terminal
mm [in]*
Operate point
from formed PCB
terminal center line
mm [in]*
P.T. max.
mm [in]
O.T. min.
mm [in]
D.T. max.
mm [in]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
12,7 [0.50]
-
-
11.9 ±0,3 [0.47 ±0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
14,0 [0.55]
-
-
13,2 ±0,3 [0.52 ±0.01]
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
12,7 [0.50]
-
-
11.9 ±0,3 [0.47 ±0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
12,7 [0.50]
-
-
11.9 ±0,3 [0.47 ±0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
14,0 [0.55]
-
-
13,2 ±0,3 [0.52 ±0.01]
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
12,7 [0.50]
-
-
11.9 ±0,3 [0.47 ±0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
12,7 [0.50]
-
-
11.9 ±0,3 [0.47 ±0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,5 ±0,3 [0.33 ±0.01]
-
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
-
8,9 ±0,8 [0.35 ±0.03]
-
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
16,4 [0.65]
-
-
13,6 ±0,8 [0.54 ±0.03]
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,8 [0.35 ±0.03]
-
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,8 [0.35 ±0.03]
-
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,8 [0.35 ±0.03]
-
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
15,1 [0.59]
-
-
12,3 ±0,8 [0.48 ±0.03]
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
16,4 [0.65]
-
-
13,6 ±0,8 [0.54 ±0.03]
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
16,4 [0.65]
-
-
13,6 ±0,8 [0.54 ±0.03]
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,8 [0.35 ±0.03]
-
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,9 [0.35 ±0.04]
-
-
4,0 [0.16]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,9 [0.35 ±0.04]
-
-
4,0 [0.16]
0,6 [0.02]
0,8 [0.03]
15,4 [0.61]
-
-
12,3 ±0,9 [0.48 ±0.04]
-
4,0 [0.16]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,9 [0.35 ±0.04]
-
-
4,0 [0.16]
0,6 [0.02]
0,8 [0.03]
-
-
8,9 ±0,9 [0.35 ±0.04]
-
-
4,0 [0.16]
0,6 [0.02]
0,8 [0.03]
* See asterisk on page 16 for dimension locations.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 7
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
TABLE 5. MICRO SWITCH ZM SERIES PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Long
Straight
Lever
(24,8 mm
[0.98 in])
Extended
Straight
Lever
(55,2 mm
[2.17 in])
Small Simulated Roller
Lever
(17,9 mm
[0.70 in])
Standard
Simulated
Roller Lever
(18 mm
[0.71 in])
Termination
Operate Force
max. g [oz]
Release Force
min. g [oz]
Free Position
from
mounting
hole mm [in]
max.
Catalog Listing
Circuitry/
Contact Material
Elect.
Rating
(page 6)
ZM10B10D01
SPDT Gold Plated
0.1 A
Solder
13 [0.46]
2 [0.07]
13,5 [0.53]
ZM10B70D01
SPDT Gold Plated
0.1 A
Long Solder
13 [0.46]
2 [0.07]
13,5 [0.53]
ZM10D10D01
SPDT Gold Plated
0.1 A
Solder
20 [0.70]
5 [0.18]
13,5 [0.53]
ZM10D20D01
SPDT Gold Plated
0.1 A
PCB (Straight)
20 [0.70]
5 [0.18]
-
ZM10E70D01
SPDT Gold Plated
0.1 A
Long Solder
28 [0.99]
4 [0.14]
13,5 [0.53]
ZM50E10D01
SPDT Silver Alloy
5A
Solder
28 [0.99]
4 [0.14]
13,5 [0.53]
ZM50E50D01
SPDT Silver Alloy
5A
PCB (90° Right)
28 [0.99]
4 [0.14]
-
ZM50E70D01
SPDT Silver Alloy
5A
Long Solder
28 [0.99]
4 [0.14]
13,5 [0.53]
ZM50E70J01
SPDT Silver Alloy
5A
Long Solder
12 [0.42]
2,5 [0.09]
19,2 [0.76]
ZM10E20H01
SPDT Gold Plated
0.1 A
PCB (Straight)
34 [1.20]
8 [0.28]
-
ZM50G10H01
SPDT Silver Alloy
5A
Solder
56 [1.98]
13 [0.46]
14,4 [0.57]
ZM10B70E01
SPDT Gold Plated
0.1 A
Long Solder
14 [0.49]
2 [0.07]
18,9 [0.74]
ZM10D10E01
SPDT Gold Plated
0.1 A
Solder
26 [0.92]
5 [0.18]
18,9 [0.74]
ZM10D70E01
SPDT Gold Plated
0.1 A
Long Solder
26 [0.92]
5 [0.18]
18,9 [0.74]
ZM10E10E01
SPDT Gold Plated
0.1 A
Solder
35 [1.23]
8 [0.28]
18,9 [0.74]
ZM10E50E01
SPDT Gold Plated
0.1 A
PCB (90° Right)
35 [1.23]
8 [0.28]
-
ZM50E10E01
SPDT Silver Alloy
5A
Solder
35 [1.23]
8 [0.28]
18,9 [0.74]
ZM50E20E01
SPDT Silver Alloy
5A
PCB (Straight)
35 [1.23]
8 [0.28]
-
ZM50E70E01
SPDT Silver Alloy
5A
Long Solder
35 [1.23]
8 [0.28]
18,9 [0.74]
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 8
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Free
Position
max. mm
[in]
from base
of straight
PCB
terminal*
Free Position
from formed
PCB terminal
center line
mm [in]
max. *
Operate point from
mounting hole
mm [in]
Operate point from
base of staight PCB
terminal
mm [in]*
Operate point
from formed PCB
terminal center line
mm [in]*
P.T. max.
mm [in]
O.T. min.
mm [in]
D.T. max.
mm [in]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
16,9 [0.67]
-
-
12,3 ±1,5 [0.48 ±0.06]
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
18,2 [0.72]
-
-
13,6 ±1,5 [0.54 ±0.06]
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±1,5 [0.35 ±0.06]
-
-
6,1 [0.24]
0,8 [0.03]
1,5 [0.06]
-
-
8,9 ±3,0 [0.35 ±0.12]
-
-
13,3
[0.52]
1,0 [0.04]
2,9 [0.11]
17,8 [0.70]
-
-
14,2 ±1,0 [0.56 ±0.04]
-
4,6 [0.18]
0,8 [0.03]
0,8 [0.03]
-
-
10,8 ±1,0 [0.43±0.04]
-
-
4,6 [0.18]
0,8 [0.03]
0,8 [0.03]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
23,6 [0.93]
-
-
16,9 ±1,5 [0.66 ±0.06]
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
22,3 [0.88]
-
-
15,6 ±1,5 [0.61 ±0.06]
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
-
-
12,2 ±1,5 [0.48 ±0.06]
-
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
* See asterisk on page 16 for dimension locations.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 9
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
TABLE 5. MICRO SWITCH ZM SERIES PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Roller Lever
(16,6 mm
[0.65 in])
L-Shaped
Lever
(31,5 mm
[1.24 in])
Termination
Operate Force
max. g [oz]
Release Force
min. g [oz]
Free Position
from
mounting
hole mm [in]
max.
Long Solder
19 [0.67]
2 [0.07]
17,6 [0.69]
0.1 A
Solder
34 [1.23]
8 [0.28]
17,6 [0.69]
0.1 A
PCB (90° Right)
34 [1.23]
8 [0.28]
-
SPDT Silver Alloy
5A
Solder
25 [0.88]
6 [0.21]
17,6 [0.69]
SPDT Silver Alloy
5A
Solder
34 [1.23]
8 [0.28]
17,6 [0.69]
SPDT Silver Alloy
5A
PCB (90° Right)
34 [1.23]
8 [0.28]
-
ZM50E70F01
SPDT Silver Alloy
5A
Long Solder
34 [1.23]
8 [0.28]
17,6 [0.69]
ZM90G20F01
SPDT Silver Alloy
10.1 A
PCB (Straight)
60 [2.17]
15 [0.53]
-
ZM50E10L01
SPDT Silver Alloy
5A
Solder
20 [0.71]
4 [0.14]
2,5 [0.10]
Catalog Listing
Circuitry/
Contact Material
Elect.
Rating
(page 6)
ZM10B70F01
SPDT Gold Plated
0.1 A
ZM10E10F01
SPDT Gold Plated
ZM10E50F01
SPDT Gold Plated
ZM50D10F01
ZM50E10F01
ZM50E50F01
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 10
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Free
Position
max. mm
[in]
from base
of straight
PCB
terminal*
Free Position
from formed
PCB terminal
center line
mm [in]
max. *
Operate point from
mounting hole
mm [in]
Operate point from
base of staight PCB
terminal
mm [in]*
Operate point
from formed PCB
terminal center line
mm [in]*
P.T. max.
mm [in]
O.T. min.
mm [in]
D.T. max.
mm [in]
-
-
14,6 ±0,8 [0.57 ±0.03]
-
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
-
14,6 ±0,8 [0.57 ±0.03]
-
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
22,3 [0.88]
-
-
19,3 ±0,8 [0.76 ±0.03]
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
-
14,6 ±0,8 [0.57 ±0.03]
-
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
-
14,6 ±0,8 [0.57 ±0.03]
-
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
22,3 [0.88]
-
-
19,3 ±0,8 [0.76 ±0.03]
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
-
14,6 ±0,8 [0.57 ±0.03]
-
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
21,0 [0.83]
-
-
18,0 ±0,8 [0.71 ±0.03]
-
3,8 [0.15]
0,8 [0.03]
0,8 [0.03]
-
-
-5,2 ± 3,0 [-0.20
±0.12]
-
-
6,0 [0.24]
1,0 [0.04]
1,9 [0.07]
* See asterisk on page 16 for dimension locations.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 11
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Table 6. MICRO SWITCH™ ZM1 Series Product Specifications and Listings
Contact your Honeywell rep or distributor for additional listings
TABLE 6. MICRO SWITCH ZM1 SERIES PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Circuitry/
Contact Material
Elect.
Rating
(page 7)
Termination
Operate Force max.
g [oz]
Release Force min.
g [oz]
ZM110B70A01
SPDT Silver Alloy
0.1 A
Long Solder
70 [2.47]
5 [0.18]
ZM160C70A01
SPDT Silver Alloy
6A
Long Solder
150 [5.29]
25 [0.88]
ZM190C60A01
SPDT Silver Alloy
10.1 A
PCB (90° Left)
150 [5.29]
25 [0.88]
ZM195G10A03
SPNO Silver Alloy
16.1 A
Solder
355 [12.52]
100 [3.53]
ZM190C10B01
SPDT Silver Alloy
10.1 A
Solder
50 [1.76]
6 [0.21]
ZM195G10B04
SPNC Silver Alloy
16.1 A
Solder
118 [4.16]
20 [0.71]
ZM115C70C01-G
SPDT Gold Plated
0.1 A
Long Solder
45 [1.59]
5 [0.18]
ZM150C70C01
SPDT Silver Alloy
3A
Long Solder
45 [1.59]
5 [0.18]
ZM190C10C01
SPDT Silver Alloy
10.1 A
Solder
45 [1.59]
5 [0.18]
ZM160C10E01
SPDT Silver Alloy
6A
Solder
42 [1.48]
6 [0.21]
Catalog Listing
Pin Plunger
Short
Straight
Lever
(16,7 mm
[0.66 in])
Standard
Straight
Lever
(18,7 mm
[0.74 in])
Standard
Simulated
Roller Lever
(18 mm
[0.71 in])
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 12
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
Free Position
Free Position
from formed
from
PCB terminal
mounting
center line
hole mm [in]
mm [in]
max.
max. *
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
Operate point from
mounting hole
mm [in]
Operate point
from formed PCB
terminal center line
mm [in]*
P.T. max.
mm [in]
O.T. min.
mm [in]
D.T. max.
mm [in]
9,4 [0.37]
-
8,6 ±0,3 [0.34 ± 0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
9,4 [0.37]
-
8,6 ±0,3 [0.34 ± 0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
-
14,0 [0.55]
-
13,2 ±0,3 [0.52 ±0.01]
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
9,4 [0.37]
-
8,6 ±0,3 [0.34 ± 0.01]
-
1,1 [0.04]
0,4 [0.02]
0,2 [0.01]
11,8 [0.46]
-
9,0 ±0,8 [0.35 ±0.03]
-
3,6 [0.14]
0,6 [0.02]
0,8 [0.03]
11,8 [0.46]
-
8,6 ±1,3 [0.34 ±0.05]
-
4,6 [0.18]
0,5 [0.02]
1,5 [0.06]
12,1 [0.48]
-
9,0 ±0,9 [0.35 ±0.04]
-
4,0 [0.16]
0,7 [0.03]
0,9 [0.04]
12,1 [0.48]
-
9,0 ±0,9 [0.35 ±0.04]
-
4,0 [0.16]
0,7 [0.03]
0,9 [0.04]
12,1 [0.48]
-
9,0 ±0,9 [0.35 ±0.04]
-
4,0 [0.16]
0,7 [0.03]
0,9 [0.04]
16,0 [0.63]
-
12,3 ±1,5 [0.48 ±0.06]
-
5,2 [0.20]
0,6 [0.02]
0,9 [0.04]
* See asterisk on page 17 for dimension locations.
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 13
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
MICRO SWITCH ZM SERIES MOUNTING DIMENSIONS
General Mounting Dimensions
Terminal Type 10 - Standard Solder
Terminal Type 20 - Straight PCB
Terminal Type 60 - Left PCB
Terminal Type 50 - Right PCB
Terminal Type 70 - Long Solder
Actuator Types: All actuators except Type A and F are 4,05 mm ±0,05 mm wide
Type A
Type B
Type F
Type L
Type D
Type C
Type H
Type M
Type J
Type E
Type K
Operate Point References for PCB Terminals
Terminal Type 50/60
Terminal Type 20
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 14
MICRO SWITCH SUBMINIATURE BASIC SWITCHES
ZM & ZM1 SERIES
MICRO SWITCH ZM1 SERIES MOUNTING DIMENSIONS
General Mounting Dimensions
Terminal Type 10 - Standard Solder
Terminal Type 20 - Straight PCB
Terminal Type 60 - Left PCB
Terminal Type 50 - Right PCB
Terminal Type 70 - Long Solder
Actuator Types: All actuators except Type A and F are 4,05 mm ±0,05 mm wide
Type A
Type B
Type F
Type L
Type D
Type C
Type H
Type M
Type J
Type E
Type K
Operate Point References for PCB Terminals
Terminal Type 50/60
Terminal Type 20
MICRO SWITCH ZM/ZM1 Basic Switch Datasheet | sps.honeywell.com/ast | 15
ADDITIONAL INFORMATION
WARRANTY/REMEDY
The following associated literature is
available on the Honeywell web site at
sps.honeywell.com/ast:
• Product installation instructions
Honeywell warrants goods of its manufacture
as being free of defective materials and
faulty workmanship during the applicable
warranty period. Honeywell’s standard product
warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order
acknowledgment or consult your local sales
office for specific warranty details. If warranted
goods are returned to Honeywell during the
period of coverage, Honeywell will repair or
replace, at its option, without charge those
items that Honeywell, in its sole discretion,
finds defective. The foregoing is buyer’s sole
remedy and is in lieu of all other warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose. In no event shall Honeywell be
liable for consequential, special, or indirect
damages.
• Product range guide
• Product nomenclature tree
• Product application-specific
information
– Application note: Sensors and
switches for potential HVAC/R
applications
– Application note: Sensors and
switches for potential medical
applications
– Technical bulletin: Applying precision
switches
– Technical bulletin: Low energy switch
guide
While Honeywell may provide application
assistance personally, through our literature
and the Honeywell web site, it is buyer’s sole
responsibility to determine the suitability of
the product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility
for its use.
FOR MORE INFORMATION
Honeywell Advanced Sensing
Technologies services its customers
through a worldwide network of sales
offices and distributors. For application
assistance, current specifications, pricing
or the nearest Authorized Distributor,
visit our website or call:
USA/Canada +1 302 613 4491
Latin America
+1 305 805 8188
Europe
+44 1344 238258
Japan
+81 (0) 3-6730-7152
Singapore
+65 6355 2828
Greater China
+86 4006396841
Honeywell
Advanced Sensing Technologies
830 East Arapaho Road
Richardson, TX 75081
www.honeywell.com
004991-4-EN | 4 | 07/22
© 2022 Honeywell International Inc. All rights reserved.
m WARNING
MISUSE OF
DOCUMENTATION
•
•
The information presented in this
product sheet is for reference only.
Do not use this document as a
product installation guide.
Complete installation, operation,
and maintenance information
is provided in the instructions
supplied with each product.
Failure to comply with these
instructions could result in death or
serious injury.
