ZV50E10S01-B

MICRO SWITCH™ Standard Subminiature Snap-Action Z Series Snap-Action Switches DESCRIPTION The industry-defining name in snap-action switches, Honeywell MICRO SWITCH™ standard subminiatures are designed for repeatability and enhanced product life. The MICRO SWITCH™ Z Series combines small size and light weight with ample electrical capacity, low cost, and enhanced life. 0B The MICRO SWITCH™ Z Series consists of six product families with unique features that can drop right into an application. These reliable and rugged switches offer a variety of actuators, terminations, circuitry configurations, electrical ratings, contact materials, operating characteristics, and sealing allows them to be utilized in numerous potential applications. Carefully manufactured and thoroughly inspected, the MICRO SWITCH™ Z Series standard subminiatures are a great value for applications requiring sensing presence or absence of an object. FEATURES • • Small size and light weight switches lend themselves to POTENTIAL APPLICATIONS • Industrial: Appliances, communication equipment, numerous potential applications computers, electromechanical timers, mechanical cam Choice of low energy or power-duty electrical ratings allow assemblies (timers), office equipment, electric tools, HVAC the switch to be specified in more types of applications wall controls, instrumentation, valves, vending machines • Broad range of amp ratings (from 0.1 A to 10.1 A) • Watertight IP67 sealing available on some listings allows harnesses; sub-assemblies for convertible roofs; lock the switch to be used where sealing and presence/absence modules for tail-gate/trunk; tank and hood latch detection detection is required • • • UL/CSA, cUL, ENEC, and CE approvals Transportation: Automotive, truck, and boat wire Medical: Medical and hospital beds, foot pedal controls, and chair lifts • Applications where a pre-wired sealed on/off switch is required MICRO SWITCH™ Standard Subminiature Snap-Action Z Series SPECIFICATIONS SERIES Differentiator Use Potential applications Ampere rating Circuitry Operating force Termination Actuator Voltage Agency approvals Agency file info Operating temperature Contacts Housing Sealing Storage humidity Dielectric strength Contact resistance Insulation resistance Vibration Expected mechanical life Electrical service life Electrical operating frequency Mechanical operation frequency 2 ZM (coil internal spring) Integral lever, no ENEC, and an internal coil spring Use when ENEC is not required and the lever needs to be better secured to the switch alarms, computers, food processors, gas detectors, humidifiers, joysticks, money sorters, water pumps 0.1 A, 5 A, 10.1 A SPDT, SPNO 0.18 oz to 8.78 oz Quick connect, solder, pcb Pin plunger, straight, roller, sim. roller, L-shaped 125 Vac, 250 Vac, 30 Vdc ZM1 (flat internal spring) Integral lever, ENEC, and a flat internal spring Used when added forces of a flat snap spring, ENEC, and a secured lever are required air conditioners, consumer electronics, gas detectors, humidifiers, telephones, time recorders, toys 0.1 A, 3 A, 6 A, 10.1 A SPDT, SPNO, SPNC 12 gf to 355 gf Quick connect, solder, pcb Pin plunger, straight, roller, sim. roller, L-shaped 125 Vac, 250 Vac UL, CE, CSA UL, cUL, ENEC CE: 61058-1; UL: E12252; UL: E12252; c-UL: E12252 CSA: LR212438 -40 °C to 120 °C -40 °C to 120 °C [-40 °F to 248 °F] [-40 °F to 248 °F] Silver, gold-plated silver, goldSilver, gold-plated silver, goldplated brass, silver-tin-indium plated brass, silver-tin-indium oxide oxide Polyamide (nylon) Polyamide (nylon) None 85 % RH max. at 40 °C [104 °F] 1000 Vac (50 Hz to 60 Hz) 1000 Vac (50 Hz to 60 Hz)/min between contacts, between terminals and ground, for one minute 300 mOhm max. 300 mOhm max. 100 mOhm min. 100 mOhm min. (at 500 Vdc/min) (at 250 Vdc/min) 10 Hz to 55 Hz, displacement 0,75 mm (p-p) 10 million min. 10,000 operations min. Min. 1,000,000 operations on resistive load current 0.1 A at 125 Vac; 0.1 A at 30 Vdc; Min. 6,000 operations on resistive load 5 A at 125/250 Vac 0.1 A – 120 operations/min other – 10 to 30 operations/min 120 operations/min. sensing.honeywell.com ZV (coil spring) Snap-on lever, ENEC, and coil spring Use when ENEC and a snap-on lever are required air conditioners, computers, consumer appliances, gas detectors, joysticks, money sorters, telephones, toys 0.1 A, 6 A, 10.1 A SPDT, SPNO, SPNC 0.78 oz to 11.01 oz quick connect, solder, pcb pin plunger, straight, roller, sim. roller 125 Vac/125 Vdc 6(2) A 250 Vac UL, CE, CSA, ENEC CE: 61058-1; UL:12252; c-UL: E12252 -40 °C to 120 °C [-40 °F to 248 °F] Silver, gold-plated silver, silvertin-indium oxide Polyamide (nylon) 1000 Vac (50 Hz to 60 Hz) between contacts, between terminals and ground, for one minute 300 mOhm max. 100 mOhm min. (at 500 Vdc/min) 10 million min. Min. 10 million @