ZX10E10C01

MICRO SWITCH™ Subminiature Basic Switches ZX Series Datasheet MICRO SWITCH™ ZX Series Subminiature Basic Switches Honeywell’s MICRO SWITCH™ ZX Series is a subminiature snap-action switch from the family of Z series subminiature basic switches. Although small in size, the ZX Series is rated for controlling electrical loads ranging from logic-level/computer-based circuits to limited power-duty switching (up to 3 A/125 Vac). The ZX subminiature switch package is available with either solder terminals or a variety of different styles of printed circuit board (PCB) terminals to fulfill the requirements for electrical connectivity. A wide variety of stainless steel levers are available and when combined with the subminiature package size, can adapt the ZX Series to a wide range of applications. To enhance the versatility of ZX switches, the family is certified to UL, cUL, ENEC, and CQC for worldwide use. The ZX Series is the right choice for a cost-effective subminiature switch package. What makes our switches better? Designed to operate in a variety of applications Current carrying capacity, up to 3 A, allows for a solution in many applications where space is a premium Cost-effective switch in a compact package Subminiature switch package designed to meet a wide range of temperature requirements RIGHT SWITCH FOR THE RIGHT APPLICATION RELIABILITY • ELECTRICAL RATING 2 sensing.honeywell.com Features and Benefits SMALL PACKAGE SIZE Subminiature package size (6,5 mm x 12,8 mm [0.25 in x 0.50 in]) allows the MICRO SWITCH™ ZX Series switch to fit in applications where other sensors or switches are too large. Enhanced performance in a compact package WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS ZX switch design helps assure control of limited power-duty switching with silver contacts or logic-level (low voltage, and milliamperes) with gold-plated contacts. DESIGN FLEXIBILITY Designed with a pin plunger for actuation, the ZX Series is also available with various styles of levers. The optional levers expand the versatility of the switch in the application. In addition, the ZX Series features a variety of terminations designed to provide flexibility for the electrical connectivity. Certified to cUL, UL, ENEC, and CQC for global applications, as well as RoHS compliant. WORLDWIDE AVAILABILITY Entire family of ZX switches is available worldwide through Honeywell’s network. Potential Applications INDUSTRIAL Circuit breaker box module interlock Electric utility meter tamper switch Tamper switch for computer modules COMMERCIAL Small residential appliances ATM equipment MEDICAL Hospital bed pendant controls Infusion pumps (end of travel) Syringes (end of travel) sensing.honeywell.com 3 ZX Series PRODUCT NOMENCLATURE ZX 10 E 10 A Switch Type Current Rating Operating Force3 Terminal Type (Levers Mounted Internal) ZX Series Subminiature 10 Basic 40 Switch (at pin plunger) Actuator Type4 0.1 A 48 Vdc/125 Vac 0.2 A 60 Vdc gold-plated contacts C 90 gf max. 10 Solder, straight A Pin plunger 1 A/3 A 125 Vac silver contacts E 150 gf max. 20 PCB (straight) B Short straight lever (10 mm) 30 PCB (snap-in) C Standard straight lever (13 mm) 50 PCB (right side) E Sim. roller lever (11,8 mm, r 2,5 mm) 60 PCB (left side) F Roller lever (10,7 mm, Ø 4,8 mm) 99 SPECIAL2 G Sim. roller lever (10 mm, r 1,3 mm) H Sim. roller lever (15 mm, r 1,3 mm) J Long straight lever (30 mm) S NOTES: SPECIAL2 1 Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. 2 Actuator Type “99” and/or Actuator Type “S” designates a special and requires a special designator at the end of the listing. 3 Operating force is measured at the plunger. Adding an actuator/lever will change the operating force. See pages 6 and 7 for operating forces. 4 Lever length dimension is measured as follows: Straight lever - from center line of lever pivot to end of lever; Roller and simulated roller lever - from center line of pivot to center of roller diameter. See page 8 for dimension details. 4 sensing.honeywell.com 01 Circuitry 01 SPDT — Special Designator2 A special designator is used to indicate non-standard features. This code consists of three alphanumeric characters max. A special designator is required when Terminal Type is “99” and/or Actutor Type is “S” MICRO SWITCH™ Subminiature Basic Switches Table 1. Specifications Characteristic Circuitry Operating force Termination ZX10 Series (Logic Level) ZX40 Series (Power Duty) SPDT SPDT 90 g or 150 g @ plunger 90 g or 150 g @ plunger PCB, solder PCB, solder internal live parts protected to IP40, IP00 due to exposed terminals internal live parts protected to IP40, IP00 due to exposed terminals pin plunger, short flat lever, standard flat lever, long flat lever, roller lever, short simulated roller lever, standard simulated roller lever, long sim. roller lever, special levers pin plunger, short flat lever, standard flat lever, long flat lever, roller lever, short simulated roller lever, standard simulated roller lever, long sim. roller lever, special levers UL, cUL, ENEC, CQC, RoHS compliant UL, cUL, ENEC, CQC, RoHS complaint -40 °C to 85 °C [-40 °F to 185 °F] -40 °C to 85 °C [-40 °F to 185 °F] 3,000,000 min. @ 120 cycles/minute max. 3,000,000 min. @ 120 cycles/minute max. 10,000 min. @ 30 cycles/minute max. 10,000 min. @ 30 cycles/minute max. 100 mΩ max. 50 mΩ max. 100 MΩ min. (500 Vdc for one minute) 100 MΩ min. (500 Vdc for one minute) 1500 VRMS for one minute