HF105F-1/024DT-1ZSTF(257)

HF1 05 F -1 MINIATURE HIGH POWER RELAY Features File No.:E134517 ● ● ● ● ● V D E File No.:40025518 (DC Type) 40A switching capability 4kV dielectric strength (between coil and contacts) Heavy load up to 7200VA PCB coil terminals, ideal for heavy duty load Unenclosed, Plastic sealed and dust protected types available File No.:CQC12002071130(DC Type) CQC10002049165(DC Type) CQC16002140270(DC Type) RoHS compliant COIL CONTACT DATA Contact arrangement Contact resistance1) 1A 1B 1C (NO) 50m DC type: Approx. 900mW; AC type: Approx. 2VA Coil power max. (at 1A 24VDC) AgSnO2, AgCdO Contact material 11080VA 1200W Max. switching capacity Max. switching voltage Max. switching current HF105F-1 rating HF105F-1L rating Mechanical endurance 1C (NC) 4155VA 450W 5540VA 600W 2770VA 300W SAFETY APPROVAL RATINGS 30A 277VAC 277VAC / 28VDC 40A2) 15A 20A 10A 30A 240VAC 15A 240VAC 20A 240VAC 20A 28VDC 10A 28VDC 25A 240VAC 15A 240VAC 20A 240VAC 10A 240VAC Electrical endurance 10A 28VDC 20A 28VDC 1 Form A 10A 240VAC 20A 28VDC 20A 28VDC 10A 28VDC 2HP 250VAC AgCdO 28A 277VAC 1 x 107OPS 277VAC(FLA=20)(LRA=60) 1H type(Non-plastic sealed): 1 x 105OPS (28A 277VAC, Resistive load, AgCdO, Room temp., 1s on 9s off) AgCdO 15A 277VAC 10A 28VDC 1/2HP 250VAC 1/4HP 125VAC 277VAC(FLA=10)(LRA=33) AgSnO2 AgCdO 2HP 250VAC UL/ CUL 1 Form B CHARACTERISTICS Insulation resistance Dielectric Between coil & contacts strength Between open contacts 1000M (at 500VDC) 2500VAC/4000VAC 1min 1500VAC 1min Operate time (at rated. volt.) DC type: 15ms max. Release time (at rated. volt.) DC type: 10ms max. DC: -55 to 85 AC: -55 to 60 Ambient temperature Vibration resistance Humidity 1HP 125VAC 30A 28VDC 10A 28VDC Notes:1) The data shown above are initial values. 2) Long time current-carrying under 40A condition is prohibited. Shock resistance 40A 277VAC AgSnO2 AgCdO Functional 98m/s2 Destructive 980m/s2 10Hz to 55Hz 1.5mm DA 5% to 85% RH NO 30A 277VAC 1HP 125VAC 20A 277VAC AgCdO 20A 28VDC 277VAC(FLA=20)(LRA=60) 1 Form C AgSnO2 AgCdO 20A 277VAC 1/2HP 250VAC 1/4HP 125VAC NC 10A 277VAC AgCdO 10A 28VDC Termination PCB 277VAC(FLA=10)(LRA=33) Unit weight Approx.36g Unenclosed (Only for DC coil), Plastic sealed, Dust protected Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. Construction Notes: 1) For plastic sealed type, the venting-hole should be opened in test. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. 4) UL insulation system: Class F, Class B. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.00 309 COIL DATA at 23 DC type AC type Nominal Voltage VDC Pick-up Voltage VDC max.3) 5 3.75 Drop-out Max. Voltage Voltage VDC VDC *4) min.3) 0.5 Nominal Pick-up Voltage Voltage VAC VAC max.3) Coil Resistance 27 x (1 10%) 6.5 12 9.6 Drop-out Voltage VAC min.3) Max. Voltage VDC *4) 2.4 15.6 25 x (1 10%) Coil Resistance 6 4.50 0.6 7.8 40 x (1 10%) 24 19.2 4.8 31.2 100 x (1 10%) 9 6.75 0.9 11.7 97 x (1 10%) 120 96.0 24.0 156 2500 x (1 10%) 12 9.00 1.2 15.6 155 x (1 10%) 208 166.4 41 270.4 11000 x (1 10%) 15 11.25 1.5 19.5 256 x (1 10%) 220 176 44 286 13490 x (1 10%) 18 13.50 1.8 23.4 380 x (1 10%) 240 192 48 286 13490 x (1 10%) 24 18.00 2.4 31.2 660 x (1 10%) 277 220 54 360.1 15000 x (1 10%) 48 36.00 4.8 62.4 70 52.50 7.0 91 5500 x (1 10%) 110 82.50 11 143 13450 x (1 10%) 2560 x (1 10%) Notes: 1) When requiring pick-up voltage < 80% of nominal voltage, special order allowed. 2) The data shown above are initial values at 50Hz. When requiring 60Hz, special order allowed. 3) The data shown above are initial values. 4) *Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. ORDERING INFORMATION HF 1 05F -1 / Type 018 D T -1H S T F (XXX) HF105-1: 30A (Unenclosed, only for DC coil) HF105-1L: 25A (Unenclosed, only for DC coil) HF105F-1: 30A HF105F-1L: 25A DC: 5VDC to 110VDC Coil voltage AC: 12VAC to 277VAC Coil voltage form Termination D: DC A: AC 6: With Pin NO.6, Dielectric Strength Between Coil and Contact: 2500VAC T: Without Pin NO.6, Dielectric Strength Between Coil and Contact: 4000VAC Nil: Without Pin NO.6, Dielectric Strength Between Coil and Contact: 2500VAC Contact arrangement 1H: 1 Form A 1D: 1 Form B 1Z: 1 Form C Construction S: Plastic sealed Nil: Dust protected (For HF105F-1, HF105F-1L) Unenclosed (For HF105-1, HF105-1L) Contact material T: AgSnO2 Nil: AgCdO Insulation standard F: Class F Nil: Class B Special code3) XXX: Customer special requirement 1)2) Nil: Standard Notes:1) We recommend dust protected types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. 4) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. 310 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT HF105F-1 Unit: mm 1 Form A Outline Dimensions Wiring Diagram PCB Layout (Bottom view) (Bottom view) With 6# terminal +0.2 3.6 27.1- 0.8 20 +0.2 - 0.8 5.3 3x 2.1 3.8 2x 1.1 8.9 +0.2 - 0.8 20.2 3.6 14 17.8 22.1 Without 6# terminal 6# terminal +0.2 27.1- 0.8 20+0.2 - 0.8 5.3 2x 2.1 3.8 2x 1.1 14 17.8 20.2 +0.2 - 0.8 22.1 1 Form B With 6# terminal 3.6 20 +0.2 - 0.8 27.1 +0.2 - 0.8 3x 2.1 5.3 3.8 2x 1.1 8.9 20.2 +0.2 - 0.8 6# terminal 14 22.1 17.8 Without 6# terminal +0.2 27.1- 0.8 3.6 20 +0.2 - 0.8 2x 2.1 5.3 3.8 2x 1.1 20.2 +0.2 - 0.8 14 17.8 22.1 311 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form C Outline Dimensions With 6# terminal 3.6 20 +0.2 - 0.8 Wiring Diagram PCB Layout (Bottom view) (Bottom view) +0.2 27.1- 0.8 4x 2.1 5.3 3.8 2x 1.1 8.9 20.2 14 +0.2 - 0.8 17.8 22.1 Without 6# terminal +0.2 3x 2.1 27.1- 0.8 3.6 20 +0.2 - 0.8 6# terminal 5.3 3.8 2x 1.1 14 17.8 20.2 +0.2 - 0.8 22.1 HF105-1 1 Form A With 6# terminal 3.6 16.3 23.3 4.1 3x 2.1 3.8 2x 1.1 8.9 6# terminal 14 17.8 Without 6# terminal 3.6 16.3 23.3 4.1 2x 2.1 3.8 2x 1.1 14 17.8 312 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form B Outline Dimensions With 6# terminal 3.6 16.3 Wiring Diagram PCB Layout (Bottom view) (Bottom view) 3x 2.1 23.3 4.1 3.8 2x 1.1 8.9 6# terminal 14 17.8 Without 6# terminal 3.6 16.3 2x 2.1 23.3 4.1 3.8 2x 1.1 14 17.8 1 Form C With 6# terminal 4x 2.1 3.6 16.3 23.3 4.1 3.8 2x 1.1 8.9 6# terminal 14 17.8 Without 6# terminal 3.6 16.3 3x 2.1 23.3 4.1 3.8 2x 1.1 14 17.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 313 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER COIL TEMPERATURE RISE ENDURANCE CURVE 110 100 100 DC Coil 1A 40 1C (NO) 30 1B 20 1C (NC) 15 100 30 1A 90 10 1C (NO) 80 1C (NC) 1B 10 70 30A 60 1 AC Resistive Load 15A 40 DC Resistive 1 Load 10 25A 20A 50 0A 100 200 1000 Contact Voltage (V) 0 10 20 30 40 Contact Current (A) 0 80 90 100 110 120 130 140 150 160 Percentage Of Nominal Coil Voltage Test conditions: Resistive load, Dust protected, AgCdO, Room temp., 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 314