HF105F-2/012D-1HSF(257)

H F1 0 5F - 2 MINIATURE HIGH POWER RELAY Features File No.:E134517 ● 40A switching capability ● Heavy load up to 7200VA V D E ● PCB coil terminals, ideal for heavy duty load File No.:40025518 (DC type) ● Plastic sealed and dust protected types available File No.: CQC10002049165(DC type) CQC16002140270(DC type) RoHS compliant CONTACT DATA Contact arrangement Contact resistance1) COIL 1A 1B 1C (NO) DC type: Approx. 900mW; AC type: Approx. 2VA Coil power 50m max.(at 1A 24VDC) Contact material Max. switching capacity Max. switching voltage Max. switching current 1C (NC) AgSnO2, AgCdO SAFETY APPROVAL RATINGS 7200VA/560W 3600VA/280W 4800VA/560W 2400VA/280W 40A 15A 2) 20A 10A 1 Form A When PCB terminals carry current≤30A When PCB terminals do not carry current (only QC terminals carry current)≤25A Max.continuous current HF105F-2 rating HF105F-2L rating Mechanical endurance 30A 277VAC 277VAC/28VDC AgSnO2 AgCdO OPS 5 1H type(Non-plastic sealed): 1 x 10 OPS (28A 277VAC, Resistive load, AgCdO, Room temp., 1s on 9s off) Electrical endurance UL/ CUL 1 Form B Notes:1) The data shown above are initial values. 2) Long time current-carrying under 40A condition is prohibited. CHARACTERISTICS Insulation resistance Dielectric Between coil & contacts strength Between open contacts 2500VAC 1min Operate time (at rated. volt.) DC type: 15ms max. Release time (at rated. volt.) DC type: 10ms max. Functional to 85 to 60 98m/s2 Destructive 980m/s2 Ambient temperature Shock resistance Vibration resistance Humidity DC: -55 AC: -55 AgCdO 15A 277VAC 10A 28VDC 1/2HP 250VAC 1/4HP 125VAC 277VAC(FLA=10)(LRA=33) AgSnO2 AgCdO 2HP 250VAC AgCdO 20A 277VAC 30A 277VAC 1HP 125VAC 20A 28VDC 277VAC(FLA=20)(LRA=60) 1 Form C AgSnO2 AgCdO 20A 277VAC 1/2HP 250VAC 1/4HP 125VAC NC 10A 277VAC AgCdO 10A 28VDC 10Hz to 55Hz 1.5mm DA 277VAC(FLA=10)(LRA=33) 5% to 85% RH Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. Termination PCB & QC Unit weight Approx. 36g Plastic sealed, Dust protected Construction NO 1000M (at 500VDC) 1500VAC 1min 28A 277VAC 277VAC(FLA=20)(LRA=60) 25A 240VAC 15A 240VAC 20A 240VAC 10A 240VAC 20A 28VDC 10A 28VDC 20A 28VDC 10A 28VDC 1 x 10 1HP 125VAC 30A 28VDC AgCdO 30A 240VAC 15A 240VAC 20A 240VAC 10A 240VAC 20A 28VDC 10A 28VDC 20A 28VDC 10A 28VDC 7 40A 277VAC 2HP 250VAC Notes: 1) For plastic sealed type, the venting-hole should be opened in test. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. 4) UL insulation system: Class F, Class B. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.02 315 COIL DATA at 23 DC type AC type Nominal Voltage VDC Pick-up Voltage VDC max.3) Drop-out Voltage VDC min.3) Max. Voltage VDC *4) Coil Resistance Nominal Pick-up Voltage Voltage VAC VAC max.3) 5 3.75 0.5 6.5 27 x (1 10%) 12 6 4.50 0.6 7.8 40 x (1 10%) 24 Drop-out Voltage VAC min.3) Max. Voltage VDC *4) 9.6 2.4 15.6 19.2 4.8 31.2 100 x (1 10%) Coil Resistance 25 x (1 10%) 9 6.75 0.9 11.7 97 x (1 10%) 120 96.0 24.0 156 2500 x (1 10%) 12 9.00 1.2 15.6 155 x (1 10%) 208 166.4 41 270.4 11000 x (1 10%) 13490 x (1 10%) 15 11.25 1.5 19.5 256 x (1 10%) 220 176 44 286 18 13.50 1.8 23.4 380 x (1 10%) 240 192 48 286 13490 x (1 10%) 24 18.00 2.4 31.2 660 x (1 10%) 277 220 54 360.1 15000 x (1 10%) 48 36.00 4.8 62.4 2560 x (1 10%) 70 52.50 7.0 91 5500 x (1 10%) 110 82.50 11 143 13450 x (1 10%) Notes: 1) When requiring pick-up voltage < 80% of nominal voltage, special order allowed. 2) The data shown above are initial values at 50Hz. When requiring 60Hz, special order allowed. 3) The data shown above are initial values. 4) *Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. ORDERING INFORMATION HF 1 0 5F -2 / 0 1 8 D Type -1H S T F (XXX) HF105F-2: 30A HF105F-2L: 25A Coil voltage DC: 5VDC to 110VDC AC: 12VAC to 277VAC Coil voltage form D: DC Contact arrangement 1H:1 Form A Construction 1) A: AC 1D:1 Form B S: Plastic sealed 1Z:1 Form C Nil: Dust protected Contact material T: AgSnO2 Nil: AgCdO Insulation standard F: Class F Nil: Class B Special code3) XXX: Customer special requirement Nil: Standard Notes: 1) We recommend dust protected types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. 316 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form A Outline Dimensions Wiring Diagram PCB Layout (Bottom view) 27.5 3.6±0.5 27.8 2x 2.1 0.8(两处) 6.4(两处) 2x 1.1 3.8 (Bottom view) 14 17.8 (Top view) 1 Form B 27.5 3.6±0.5 2x 2.1 27.8 0.8(两处) 6.4(两处) (Bottom view) (Top view) 2x 1.1 3.8 14 17.8 1 Form C 27.5 3.6±0.5 27.8 3x 2.1 0.8(三处) 6.4(三处) (Bottom view) (Top view) 2x 1.1 3.8 14 17.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 317 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER 100 40 30 20 15 ENDURANCE CURVE COIL TEMPERATURE RISE 110 100 DC Coil 1A 1C (NO) 100 30 1A 90 1B 10 1C (NO) 1C (NC) 80 1C (NC) 10 1B 70 30A 60 1 AC Resistive Load 15A 40 DC Resistive 1 Load 10 25A 20A 50 0A 100 200 1000 Contact Voltage (V) 0 10 20 30 40 Contact Current (A) 0 80 90 100 110 120 130 140 150 160 Percentage Of Nominal Coil Voltage Test conditions: Resistive load, Dust protected, AgCdO, Room temp., 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 318