HF115F-H/009-1HS1B(257)

HF115 F -H MINIATURE HIGH POWER RELAY Features ● ● ● ● ● ● ● ● File No.:E134517 V D E File No.:116934 High sensitive: 0.25W Low height: 15.7 mm 5kV dielectric strength (between coil and contacts) Creepage distance: 10mm Meeting VDE 0700, 0631 reinforce insulation Product in accordance to IEC 60335-1 available Sockets available Plastic sealed and flux proofed types available File No.:CQC17002168381 RoHS compliant CONTACT DATA COIL Contact arrangement 1A, 1B, 1C Contact resistance Coil power Approx. 250mW 100m max.(at 1A 6VDC) Contact material See ordering info. Contact rating (Sensitive coil) 10A 250VAC Max. switching voltage 440VAC / 300VDC Max. switching current 10A Pick-up Drop-out Voltage Voltage VDC VDC min. 1) max. 1) Max. Voltage VDC 2) Coil Resistance 5 3.75 0.5 7.5 100 x (1 10%) 1 x 107OPS 1H3 type: 1 x 10 OPS (10A 250VAC, Resistive load, at 85 C, 5s on 5s off) 6 4.50 0.6 9.0 144 x (1 10%) 12 9.00 1.2 18 576 x (1 10%) 18 13.50 1.8 27 1296 x (1 10%) 24 18.00 2.4 36 2304 x (1 10%) 3) 36.00 4.8 72 9216 x (1 15%) 3) 45.00 6.0 90 12857 x (1 15%) 5 Electrical endurance Nominal Voltage VDC at 23 2500VA Max. switching power Mechanical endurance COIL DATA o Notes: 1) The data shown above are initial values. CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Dielectric Between coil & contacts strength 5000VAC 1min Between open contacts Surge voltage (between coil & contacts) 1000VAC 1min 10kV (1.2 / 50µs) Operate time (at nomi. volt.) 15ms max. Release time (at nomi. volt.) 8ms max. Temperature rise (at nomi. volt.) 55K max. Shock resistance * Functional 98m/s2 Destructive 980m/s2 Vibration resistance * 48 60 Notes: 1) The data shown above are initial values. 2)Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). 10Hz to 150Hz 10g/5g Humidity 5% to 85% RH Ambient temperature Termination -40 to 85 PCB Unit weight Approx. 13.5g Construction Plastic sealed, Flux proofed Notes: 1) The data shown above are initial values. 2) * Index is not that of relay length direction. 3) UL insulation system: Class F, Class B. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.00 223 SAFETY APPROVAL RATINGS VDE Contact Material Specifications Ratings AgSnO2 HF115F-H….1(H;Z)(S)(1;2;3)A(G)(F) AgCdO HF115F-H….1(H;Z)(S)(1;2;3)(G)(F) 10A 250VAC at 85°C 10A 250VAC at 85°C 6A 400VAC at 85°C UL/CUL Contact Material Specifications Ratings HF115F-H….1(H;Z)(S)(1;2;3)(G)(F) AgCdO 10A 250VAC Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION H F 11 5F -H / 0 12 -1H S 3 A F (XXX) Type Coil voltage 5, 6, 12, 18, 24, 48, 60VDC Contact arrangement 1H:1 Form A 1D:1 Form B 1Z:1 Form C Construction 1) 2) S: Plastic sealed Version 1: 3.5mm 1 pole Contact materia 3) Nil: Flux proofed 2: 5.0mm 1 pole A: AgSnO2 B: AgNi AG: AgSnO2+Au plated 3: 5.0mm 1 pole Nil: AgCdO G: AgCdO+Au plated BG: AgNi+Au plated Insulation standard F: Class F Special code4) XXX: Customer special requirement Nil: Class B Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) For gold plated type, the min. switching current and min. switching voltage is 10mA 5VDC. 4) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 5) Two packing methods available: plastic tray package, tube package,Standard tube packing length is 616mm. Any special requirement needed, please contact us for more details. 6) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions 3.5mm Pinning (HF115F-H/ □□□ -□□ -1-□) 12.7 0.5x0.5 224 3x0.5x0.8 5mm Pinning (HF115F-H/ □□□ -□□-2/3-□) 12.7 0.3 0.5x0.5 6x0.5x0.8 0.3 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm PCB Layout (Bottom view) 3.5mm Pinning, 1 Pole 5mm Pinning, 1 Pole 5.04 3.5 2.6 3.5 2.6 5.04 5.04 2.6 7.56 7.56 5x 1.3 5mm Pinning, 1 Pole 5x 1.3 20.16 5.04 7.56 20.16 8x 1.3 20.16 Wiring Diagram (Bottom view) 3.5/5mm Pinning, 1 Pole, 10A, HF115F-H/ □□□ -□□ -□ -1/2 -□ 1 Form A 1 Form B 1 Form C 5mm Pinning, 1 Pole, 10A, HF115F-H/ □□□ -□□ -□ -3 -□ 1 Form A 1 Form B 1 Form C Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.52mm. CHARACTERISTIC CURVES COIL OPERATING RANGE (DC) * ENDURANCE CURVE 1000 3.6 3.4 3.0 100 2.6 2.2 1.8 10 10 A 1.4 Recommended voltage 1.0 0.6 1 0 0 2 Notes: 4 6 8 10 12 14 16 Contact Current (A) 1) Curve : 1H3 type 2) Test conditions: NO, 250VAC, Resistive load, o Flux proofed, at 85 C, 5s on 5s off. 20 40 60 80 85 Ambient Temperature ( 100 ) Notes: * The use of a relay with an energising voltage other than the rated coil voltage may lead to reduced electrical life. An energising voltage over the abver range may damage the insulation of relay coil. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 225