HF115F-L/12-ZS3L2TF(257)

HF115F-L 1 pole MINIATURE HIGH POWER LATCHING RELAY Features ● ● ● ● File No.:E134517 V D E ● ● ● ● File No.:116934 Latching relay Low height: 15.7 mm 20A switching capability 5kV dielectric strength (between coil and contacts) Creepage distance: 11mm-NO/10mm-CO version Meeting VDE 0700, 0631 reinforce insulation Product in accordance to IEC 60335-1 available UL insulation system: Class F File No.: CQC17002176310 RoHS compliant CONTACT DATA COIL DATA Contact arrangement Contact resistance1) Contact material 1A, 1C 100m max.(at 1A 6VDC) AgSnO2 16A 250VAC Contact rating (Res. load) Incandescent lamp:1500W 277VAC Typ. applicable load Standard ballast:8A 277VAC Electronic ballast: 5A 120VAC Max. switching voltage 480VAC / 300VDC Max. switching current 20A Max. switching power 4000VA 2 x 106OPS Mechanical endurance 5 x 104OPS (NO: 16A 250VAC, Resistive load, at 85 C, 1s on 9s off) Electrical endurance o Notes: 1) The data shown above are initial values. CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Dielectric Between coil & contacts strength Between open contacts 5000VAC 1min 1000VAC 1min Surge voltage (between coil & contacts) 10kV (1.2 / 50µs) Set time (at nomi. volt.) 10ms max. Reset time (at nomi. volt.) 10ms max. Shock resistance * Vibration resistance * Functional 98m/s2 Destructive 980m/s2 -40 PCB Unit weight Approx. 13.5g Plastic sealed, Flux proofed Construction Notes: 1) The data shown above are initial values. 2) * Index is not in relay length direction. COIL Coil power ≥50 30 3.5 6 62x (1 10%) 6 4.2 ≥50 30 4.2 7.2 90x (1 10%) 9 6.3 ≥50 30 6.3 10.8 202x (1 10%) 12 8.4 ≥50 30 8.4 14.4 360x (1 10%) 24 16.8 ≥50 30 16.8 1 coil latching: Approx. 400mW 2 coils latching: Approx. 600mW 28.8 1440x (1 10%) 2 coils latching Nominal Set Pulse Width Reset Max. Voltage Voltage (ms) Voltage Voltage VDC VDC VDC VDC Typical Min. max.1) max.1) Coil Resistance 5 3.5 ≥50 30 3.5 7.5 42x (1 10%) 6 4.2 ≥50 30 4.2 9 55x (1 10%) 9 6.3 ≥50 30 6.3 13.5 135x (1 10%) 12 8.4 ≥50 30 8.4 18 240x (1 10%) 24 16.8 ≥50 30 16.8 36 886x (1 10%) Notes: 1) The data shown above are initial values. 2) *Maximun voltage refers to the maximun voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS to 85 Termination Coil Resistance 3.5 5% to 85% RH Ambient temperature Reset Max. Voltage Voltage VDC VDC max.1) 5 10Hz to 150Hz 10g/5g Humidity at 23 1 coil latching Nominal Set Pulse Width (ms) Voltage Voltage VDC VDC Typical Min. max.1) UL/CUL VDE 16A/20A 250VAC 85 1HP 240VAC 40 TV-8 240VAC 40 TV-12 120VAC 40 (1 Form A) Tungsten 360W 125VAC 40 (1 Form A) Tungsten 1920W 8A 240VAC 40 Tungsten 12A 120VAC 40 Standard ballast 16A 120VAC 40 Standard ballast 8A 277VAC 40 Standard ballast 5A 347VAC/480VAC 40 Electronic ballast 5A 120VAC 40 16A 250VAC at 85 AC-15 240VAC at 85 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, IATF16949 , ISO14001, ISO45001, IECQ QC 080000, ISO/IEC 27001 CERTIFIED 2023 Rev. 2.00 215 ORDERING INFORMATION H F115 F -L / 1 2 -Z S 3 L1 F T (XXX) Type Coil voltage 5, 6, 9,12, 24VDC Contact arrangement H: 1 Form A Z: 1 Form C 1) 2) Construction S: Plastic sealed Version 3: 5.0mm 1 pole 16A Sort L1: 1 coil latching L2: 2 coils latching Contact material T: AgSnO2 Insulation standard F: Class F Special code4) XXX: Customer special requirement Nil: Flux proofed Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 4) Two packing methods available: plastic tray package, tube package,Standard tube packing length is 616mm. Any special requirement needed, please contact us for more details. 5) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions 1 coil latching 29 2 coils latching 12.7 0.3 29 0.3 0.3 12.7 0.3 12.7 0.3 1 Form A 2x□0.5 29 3x□0.5 4x0.5x0.8 12.7 0.3 4x0.5x0.8 0.3 29 0.3 1 Form C 2x□0.5 216 6x0.5x0.8 3x□0.5 6x0.5x0.8 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Wiring Diagram (Bottom view) 1 coil latching(Reset Status) + 1 Form A 1 Form C ① ⑧ 2 coils latching(Set Status) - ③ + ① set ⑤ ⑨ ⑧ ⑥ ⑤ ⑥ 1 coil latching(Reset Status) 1 Form A 1 Form C - ① ⑧ ⑦ + ③ ⑤ ⑥ - ① ⑧ ⑦ reset ④ ③ ⑤ - ③ ⑤ ⑥ + ② ⑨ ⑧ ⑦ - ③ ④ ⑤ ⑥ - ① + ② ⑧ ⑦ ⑤ ⑥ ⑨ ⑧ ⑦ ④ ⑤ ⑥ ③ reset reset + ⑦ 2 coils latching(Reset Status) reset ⑨ ② ① set ④ ③ + ⑦ set - ⑧ ① ⑦ set - ① + ② ③ ⑥ PCB Layout (Bottom view) 2 coils latching 1 coil latching 5.04 2.6 5.04 2.6 1 Form A 6x 1.3 20.16 7x 1.3 20.16 217 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm PCB Layout (Bottom view) 2 coils latching 1 coil latching 5.04 5.04 2.6 2.6 5.04 5.04 1 Form C 8x 1.3 20.16 9x 1.3 20.16 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.52mm. Notice 1. Relay is on the “reset” status when being released from stock, with the consideration of shock risen from transit and relay mounting, relay would be changed to “set” status, therefore, when application ( connecting the power supply), please reset the relay to “set” or “reset” status on request. 2. In order to maintain “set” or “reset” status, energized voltage to coil should reach the rated voltage. Do not energize voltage to “set” coil and “reset” coil simultaneously. And also long energized time (more than 1 min) should be avoided. 3. Keep the product away from strong magnetic field during transportation, storage and application, to avoid change of set/reset voltage. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 218