HF115F-S/12-HSF(257)

HF 115 F -S MINIATURE HIGH POWER RELAY Features File No.:E134517 ● ● ● ● ● ● ● ● V D E File No.:116934 Special contact struction Incandescent lamp load: 3000W 230VAC 5kV dielectric strength (between coil and contacts) Creepage distance: 11mm Low height: 15.7 mm Meeting reinforce insulation Product in accordance to IEC 60335-1 available Plastic sealed and flux proofed types available File No.:CQC17002168381 CONTACT DATA COIL Contact arrangement 1A Contact resistance 1) Coil power Approx. 400mW 100m max.(at 1A 6VDC) Contact material W+AgSnO2 Resistive:16A 250VAC Incandescent Lamp: 3000W 230VAC Inrush current: 165A / 20ms LED(Electronic ballast): 492A/1.5ms Contact rating COIL DATA at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC 1) min. Max. Voltage VDC 2) 5 3.50 0.5 7.5 62 x (1 10%) Coil Resistance Max. switching voltage 440VAC Max. switching current Max. switching power 16A 6 4.20 0.6 9.0 90 x (1 10%) 4000VA 9 6.30 0.9 13.5 202 x (1 10%) 12 8.40 1.2 18 360 x (1 10%) 18 12.6 1.8 27 810 x (1 10%) 16.8 2.4 36 1440 x (1 10%) 33.6 4.8 72 5760 x (1 15%) 42.0 6.0 90 7500 x (1 15%) 77.0 11.0 165 25200 x (1 15%) Mechanical endurance Electrical endurance 5 x 106OPS 4 1.2 x 10 OPS (3000W 230VAC, Incand escentlamp load, Room temp., 1s on 11s off) Notes:1) The data shown above are initial values. 24 CHARACTERISTICS Insulation resistance Dielectric strength 1000M (at 500VDC) Between coil & contacts 5000VAC 1min Between open contacts 1250VAC 1min Surge voltage (between coil & contacts) 10kV (1.2 / 50µs) Operate time (at rated. volt.) 10ms max. Release time (at rated. volt.) 5ms max. Temperature rise (at rated. volt.) 55K max. Functional 98m/s2 Destructive 980m/s2 Shock resistance * Vibration resistance * 60 110 3) 3) Notes:1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). SAFETY APPROVAL RATINGS VDE 5% to 85% RH Humidity Ambient temperature Termination 10Hz to 150Hz 10g 48 3) -40 to 85 PCB Unit weight Approx. 13.5g Construction Plastic sealed, Flux proofed Notes:1) This contact resistance value is tested under the norminal voltage. 2) * Index is not that of relay length direction. 3) The data shown above are initial values. 4) UL insulation system: Class F, Class B. UL/CUL 16A 250VAC at 85°C 16A 250VAC at 85°C Incandescent lamp 3000W 230VAC TV-8 120VAC Incandescent lamp 1200W 120VAC at 50°C Incandescent lamp 1200W 277VAC at 50°C Standard ballast 2.2A 277VAC at 50°C Electronic ballast 16A 277/120VAC 85°C Electronic ballast 12A 277/120VAC 85°C Electronic ballast 8A 277/347VAC 85°C Electronic ballast 15A 120VAC 85°C3) Electronic ballast 8A 277/347VAC 85°C3) Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. 3) Zero crossing control cooperative. HONGFA RELAY ISO9001, IATF16949 , ISO14001, ISO45001, IECQ QC 080000, ISO/IEC 27001 CERTIFIED 2023 Rev. 2.00 213 ORDERING INFORMATION H F 11 5F -S / 12 -H S F (XXX) Type Coil voltage 5, 6, 9, 12, 18, 24, 48, 60, 110VDC Contact arrangement H: 1 Form A Construction1) 2) S: Plastic sealed Insulation Standard F: Class F Special code3) XXX: Customer special requirement Nil: Flux proofed Nil: Class B Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 4) Two packing methods available: plastic tray package, tube package,Standard tube packing length is 616mm. Any special requirement needed, please contact us for more details. 5) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions 12.7 2x□0.5 0.5x0.8(4处) PCB Layout Wiring Diagram (Bottom view) (Bottom view) 2.6 6x 1.3 0.3 5.04 ① ⑥ ⑤ ② ③ ④ 20.16 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.52mm. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 214 12.7 0.3