HF152F-T/012-1ZSTQ(257)

HF1 52 F SUBMINIATURE HIGH POWER RELAY Features File No.: E134517 ● ● ● ● ● ● ● ● V D E File No.: 40017837 20A switching capability TV-8 125VAC Surge voltage up to 6kV (between coil and contacts) Thermal class F: standard type (at 85 ) Ambient temperature meets 105 Product in accordance to IEC 60335-1 available 1 Form C and 1 Form A configurations available Plastic sealed and dust protected types available File No.: CQC16002155734 RoHS compliant CONTACT DATA CHARACTERISTICS Contact arrangement 1A Contact resistance1) 1C 100m max.(at 1A 24VDC) Contact material AgSnO2, AgNi 20A 125VAC 17A 277VAC 7A 400VAC Contact rating (Res. load) Max. switching voltage 400VAC Max. switching current 20A Max. switching power 4700VA 16A 250VAC 10ms max. 400VAC (NO) 5ms max. Functional Shock resistance Notes: 1) The data shown above are initial values. 2) For plastic sealed type, the venting-hole should be opened in electrical endurance test. at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) 3 2.25 0.3 3.9 25 x (1 10%) 5 3.75 0.5 6.5 70 x (1 10%) 6 4.50 0.6 7.8 100 x (1 10%) 9 6.75 0.9 11.7 225 x (1 10%) Coil Resistance 12 9.00 1.2 15.6 400 x (1 10%) 18 13.5 1.8 23.4 900 x (1 10%) 24 18.0 2.4 31.2 1600 x (1 10%) 48 36.0 4.8 62.4 6400 x (1 10%) Notes: 1) The data shown above are initial values. 2) *Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. Vibration resistance 10Hz to 55Hz 1.5mm DA Humidity 5% to 85% RH HF152F: -40 to 85 HF152F-T: -40 to 105 Ambient temperature Termination PCB Unit weight Approx.14g Plastic sealed, Dust protected Construction Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 3) UL insulation system: Class F COIL Approx. 360mW Coil power SAFETY APPROVAL RATINGS AgNi UL/CUL AgSnO2 VDE 20A 125VAC NO/NC: 17A/15A 277VAC 20A 125VAC TV-8 125VAC NO: 16A 250VAC at 105 NO: 1HP 250VAC 1 Form A 16A 250VAC 7A 400VAC 1 Form C NO: 16A 250VAC NC: 7A 250VAC AgSnO2 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 192 98m/s2 980m/s2 Destructive 4000VA o Max. Voltage VDC* 2) 6kV (1.2 / 50µs) Release time (at rated. volt.) 16A COIL DATA Surge voltage(between coil & contacts) 1000VAC 1min Operate time (at rated. volt.) 1 x 10 OPS 1 x 105OPS (16A 250VAC, Resistive load, at 85 C, 1s on 9s off) 5 x 104OPS (NO, 16A 250VAC, Resistive load, Room temp., 1s on 9s off) 5 x 104OPS (NC, 10A 250VAC, Resistive load, Room temp., 1s on 9s off) Electrical endurance 100M (at 500VDC) 2500VAC 1min 7A 400VAC (NO) 7 Mechanical endurance Insulation resistance Dielectric Between coil & contacts strength Between open contacts 2020 Rev. 1.00 ORDERING INFORMATION Type S P HF 1 52F / 01 2 - 1Z Q T (XXX) HF152F: 85 , HF152F-T: 105 Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement 1H: 1 Form A 1Z: 1 Form C Pin version P: Double pins Nil: Single pin Construction 1) S: Plastic sealed Contact material T: AgSnO2 Contact capacity Nil: Dust protected Nil: AgNi Q: High capacity type 16A 250VAC, at 105 Special code4) (Only for HF152F-T) Nil: Standard type XXX: Customer special requirement Nil: Standard Notes: 1) Under the ambience with dangerous gas like H2S, SO2 or NO2, plastic sealed type is recommended; Please test the relay in real applications. If the ambience allows, dust protected type is preferentially recommended. 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) If plastic sealed type is selected for cleaning purpose, the vent-hole cover should be excised after cleaning. 4) The customer special requirement express as special code after evaluating by Hongfa. 5) HF152F-T is only available for AgSnO2 contact. 6) Two packing methods available: paper box package, tube package,Standard tube packing length is 455mm. Any special requirement needed, please contact us for more details. 7) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Single pin version Unit: mm Outline Dimensions 16 21 Vent-hole cover +0.3 (Top view) 3.5 -0.5 Wiring Diagram (Bottom view) 1 Form A 1 Form C PCB Layout (Bottom view) 12.2 12.2 4x Ø1.3 1 Form A 5xØ 1.3 1 Form C 2 4.8 2 4.8 193 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Double pin version Unit: mm Outline Dimensions 16 21 Vent-hole cover +0.3 3.5 -0.5 1x0.4 (Top view) 1.8x0.4 0.5x0.5 Wiring Diagram (Bottom view) 1 Form A 1 Form C PCB Layout (Bottom view) 4 4 4xØ 1.3 2x0.8 2x0.8 1 Form A 2 6xØ 1.3 1 Form C 12.2 2.8 2 12.2 2.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. CHARACTERISTIC CURVES ENDURANCE CURVE MAX. SWITCHING POWER 40 1A, 1C COIL TEMPERATURE RISE 60 100 1A 1C (NO) 20 17 16 10 50 B A 7 1A, 1C (NO) D 10 1 16A at 105 40 30 5 20 C 10 0 10 100 125 300 400 1000 Contact Voltage (V) 4 6 8 10 12 14 16 18 20 0 80 90 100 110 120 Percentage Of Nominal Coil Voltage Contact Current (A) Notes: 1. Curve A:1H type, Curve B:1H type, Curve C:1Z type, Curve D:1Z type 2. Test conditions: Curve A: 20A 125VAC, Resistive load, Room temp., 1s on 9s off Curve B: 16A 250VAC, Resistive load, at 85 , 1s on 9s off Curve C: NO, 20A 125VAC, Resistive load, Room temp., 1s on 9s off Curve D: NO, 16A 250VAC, Resistive load, at 85 , 1s on 9s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 194