HF152FD/12-1ZSTF(257)

HF1 52 FD SUBMINIATURE HIGH POWER RELAY Features ● 20A switching capability ● Ambient temperature meets 105 ● High temperature load: 17A 277VAC at 105 (Long endurance type) ● 1 Form C and 1 Form A configurations available ● Double pins and Single pin terminal available, effectively reduce terminal temperature rise ● Product in accordance to EN 60335-1 available File No.: E134517 V D E File No.: 40031203 File No.：CQC16002150629 RoHS compliant CONTACT DATA COIL DATA Contact arrangement 1A 1C 100m max. (at 1A 24VDC) AgSnO2, AgNi Contact resistance1) Contact material 20A 125VAC NO:17A 277VAC(Q type) 17A 277VAC(Q type) NC:10A 277VAC 7A 400VAC 400VAC (NO) Max. switching voltage 400VAC Contact rating (Res. load) Max. switching current 20A Max. switching power 4700VA 17A 4700VA 1 x 10 Mechanical endurance Electrical endurance 7 OPS 1H type: 5 x 104OPS (16A 277VAC, Resistive load, AgNi, at 85℃, 1s on 9s off) 1HT type: 1 x 105OPS (12A 277VAC, Resistive load, AgSO2, at 105℃, 1s on 9s off) Notes: 1) The data shown above are initial values. 2) For plastic sealed type, the venting-hole should be opened in electrical endurance test. CHARACTERISTICS Insulation resistance 1000M at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) Max. Voltage VDC* 2) 3 2.25 0.3 3.9 25 x (1 10%) 5 3.75 0.5 6.5 70 x (1 10%) 6 4.50 0.6 7.8 100 x (1 10%) 9 6.75 0.9 11.7 225 x (1 10%) 12 9.00 1.2 15.6 400 x (1 10%) 18 13.5 1.8 23.4 900 x (1 10%) 24 18.0 2.4 31.2 1600 x (1 10%) 48 36.0 4.8 62.4 6400 x (1 10%) Coil Resistance Notes: 1) The data shown above are initial values. 2) *Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS AgNi AgSnO2 (at 500VDC) 20A 125VAC Resistive at 40 C o 17A 125VAC Resistive at 85 C 16A 277VAC Resistive at 85 C 10A 277VAC Resistive at 105 C 12A 277VAC General Use at 105 C 1/2HP 125VAC at 40 C 1HP 250VAC at 40 C TV-8 125VAC at 40 C o Dielectric Between coil & contacts strength Between open contacts 2500VAC 1min 1000VAC 1min Operate time (at rated. volt.) 10ms max. Release time (at rated. volt.) 5ms max. Shock resistance Vibration resistance Functional 98m/s 2 Destructive 980m/s 2 10Hz to 55Hz 1.5mm DA Humidity 5% to 85% RH Ambient temperature -40 to 105 Termination PCB Unit weight Approx.14g Plastic sealed, Flux proofed Construction NO, Standard Type o o NO, Q Type NC AgNi 17A 277VAC Resistive at 105 C 10A 277VAC Resistive at 105 C AgNi AgSnO2 20A 125VAC Resistive at 40 C 10A 277VAC Resistive at 85 C AgNi 7A 277VAC Resistive at 105 C AgNi 16A 250VAC Resistive at 85 C 7A 400VAC Resistive at 105 C o o o o o o 1 Form A, Standard Type 1 Form C Approx. 360mW o o Q Type Coil power o o AgSnO2 UL/ CUL Notes: 1) The data shown above are initial values. VDE 2) Please find coil temperature curve in the characteristic curves below. 1 Form A, 3) UL insulation system: Class F, Class B. COIL AgNi o 8A 250VAC COSØ =0.4 at 85 C 10(4)A 250VAC Resistive at 105 C o AgSnO2 o (EN60730-1) AgNi 17A 250VAC at 23 C 2h/ at 105 C 2h 10A 250VAC at 23 C 2h/ at 105 C 2h AgNi NO/NC:10A/7A 250VAC at 105 C o o o o o Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.00 195 ORDERING INFORMATION H F1 52 F D / 12 - 1Z P S T F Q (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement 1H: 1 Form A Pin version 1Z: 1 Form C P: Double pins Nil: Single pin S: Plastic sealed Nil: Flux proofed Contact material T: AgSnO2 Nil: AgNi Insulation standard F: Class F Nil: Class B Contact endurance Q: Long endurance type (Only for AgNi type) Special code4) XXX: Customer special requirement Construction 1) Nil: Standard type Nil: Standard Notes: 1) Under the ambience with dangerous gas like H2S, SO2 or NO2, plastic sealed type is recommended; Please test the relay in real applications. If the ambience allows, flux proofed type is preferentially recommended. 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) If plastic sealed type is selected for cleaning purpose, the vent-hole cover should be excised after cleaning. 4) The customer special requirement express as special code after evaluating by Hongfa. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Single pin version Outline Dimensions 16 21.2 Vent-hole cover +0.3 (Top view) 3.5 -0.5 1x0.4 1x0.5 0.5x0.5 Wiring Diagram (Bottom view) 1 Form A 1 Form C PCB Layout (Bottom view) 12.2 12.2 4xØ 1.3 1 Form A 1 Form C 2 196 5xØ 1.3 4.8 2 4.8 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Double pin version Unit: mm Outline Dimensions 16 21.2 Vent-hole cover (Top view) +0.3 3.5 -0.5 1x0.5 1x0.4 0.5x0.5 Wiring Diagram (Bottom view) 1 Form C 1 Form A PCB Layout (Bottom view) 4.8 6xØ 1.3 4.8 5xØ 1.3 1 Form A 1 Form C 2 12.2 2 2.8 12.2 2.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. CHARACTERISTIC CURVES ENDURANCE CURVE MAX. SWITCHING POWER 40 1A, 1C COIL TEMPERATURE RISE 60 100 1A 1C (NO) 20 17 16 10 A 7 40 D 1A, 1C (NO) 17A at 105℃ 50 B 30 10 1 5 20 C 10 0 10 100 125 300 400 1000 Contact Voltage (V) 4 6 8 10 12 14 16 18 20 0 80 90 100 110 120 Percentage Of Nominal Coil Voltage Contact Current (A) Notes: 1. Curve A:1H type, Curve B:1H type, Curve C:1Z type, Curve D:1Z type 2. Test conditions: Curve A: 20A 125VAC, Resistive load, Room temp., 1s on 9s off Curve B: 16A 250VAC, Resistive load, at 85℃, 1s on 9s off Curve C: NO, 20A 125VAC, Resistive load, Room temp., 1s on 9s off Curve D: NO, 16A 250VAC, Resistive load, at 85℃, 1s on 9s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 197