HF158F/12-ZS3T(257)

HF 1 58 F MINIATURE HIGH POWER RELAY Features ● ● ● ● ● ● ● ● File No.:E134517 V D E File No.:40032833 20A switching capability Low height: 15.7 mm 5kV dielectric strength (between coil and contacts) Creepage distance: 10mm, meet reinforce insulation UL insulation system: Class F Product in accordance to IEC 60335-1 available Sockets available Plastic sealed and flux proofed types available File No.:CQC17002176312 RoHS compliant COIL DATA CONTACT DATA Contact arrangement 1A, 1C Contact resistance 1) 100m max.(at 1A 6VDC) Contact material AgNi, AgSnO2 Contact rating 16A 250VAC at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min. 1) 5 3.50 0.5 9.0 6 4.20 0.6 10.8 90 x (1 10%) Max. Voltage VDC 2) Coil Resistance 62 x (1 10%) Max. switching voltage 440VAC 9 6.30 0.9 16.2 202 x (1 10%) Max. switching current 20A 12 8.40 1.2 21.6 360 x (1 10%) 5000VA 18 12.6 1.8 32.4 810 x (1 10%) 7 24 16.8 2.4 43.2 1440 x (1 10%) 48 3) 33.6 4.8 86.4 5760 x (1 15%) Max. switching power Mechanical endurance Electrical endurance 2 x 10 OPS H33 type: 1 x 105OPS (16A 277VAC, Resistive load, Room temp., 1s on 9s off) H3T type: 1 x 105OPS (16A 277VAC, Resistive load, Room temp., 1s on 9s off) Notes: 1) The data shown above are initial values. CHARACTERISTICS Insulation resistance Dielectric strength 1000M (at 500VDC) Between coil & contacts 5000VAC 1min Between open contacts 1000VAC 1min Surge voltage (between coil & contacts) 15ms max. Release time (at rated. volt.) 8ms max. Temperature rise (at rated. volt.) 60K max. Functional 98m/s2 Destructive 980m/s2 Vibration resistance * AgNi UL/CUL AgSnO2 10Hz to 150Hz 10g/5g Humidity 5% to 85% RH Ambient temperature -40 to 85 Termination PCB Unit weight Approx. 11.5g Construction Plastic sealed, Flux proofed Notes: 1) The data shown above are initial values. 2) * Index is not that of relay length direction. COIL Coil power SAFETY APPROVAL RATINGS 10kV (1.2 / 50µs) Operate time (at rated. volt.) Shock resistance * Notes: 1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). Approx. 400mW AgNi VDE AgSnO2 UL/CUL 16A 277VAC at 105°C (HF158F-T) VDE (HF158F-T) 16A 277VAC 16A 24VDC 10A 400VAC at 85°C 10A 250VAC at 105°C 20A 250VAC at 85°C 1HP 240VAC B300/R300 at 85°C TV-5 120VAC 16A 277VAC 16A 24VDC 10A 400VAC at 85°C 10A 250VAC at 105°C 20A 250VAC at 85°C 13A 250VAC at 70°C 16A 250VAC at 85°C NO: 10A 250VAC at 25°C / at 105°C (Only for (217) type) 16A 250VAC at 85°C 8A 250VAC cosØ=0.4 at 85°C NO: 20A 250VAC at Room temp. / 105°C NO: 16A 250VAC at Room temp. / 105°C Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.00 253 ORDERING INFORMATION HF 1 5 8F / 12 -Z S 3 3 (XXX) HF158F: Standard HF158F-T: High temperature Type Coil voltage 5, 6, 9,12, 18, 24, 48VDC Contact arrangement H: 1 Form A Construction 1) 2) S: Plastic sealed Version 3: 5.0mm Contact material 3: AgNi Special code3) XXX: Customer special requirement Z: 1 Form C Nil: Flux proofed T: AgSnO2 Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. e.g. (217) stands for product with the electrical endurance of 3 x 105OPS at 10A load. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions 12.7 0.5 6x0.5x0.8 PCB Layout Wiring Diagram (Bottom view) (Bottom view) 5.04 2.3 1 Form A 1 Form A 6x 1.3 20.16 5.04 5.04 2.3 1 Form C 1 Form C 8x 1.3 20.16 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.52mm. 254 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER 50 Resistive Load ENDURANCE CURVE COIL OPERATING RANGE (DC) * 3.0 1000 2.6 AC 10 2.2 100 5.0 1.8 OA AgNi DC 1.0 AgSnO2 10 16A 1.4 Recommended voltage 1.0 0.5 0.6 0.1 10 1 20 30 40 50 100 200 300 400 500 Contact Voltage (V) 0 2 4 6 8 10 12 14 16 0 Contact Current (A) 20 40 60 80 100 Ambient Temperature ( ) Notes: * The use of a relay with an energising voltage Test conditions: other than the rated coil voltage may lead to NO, 250VAC, Resistive load, reduced electrical life. Flux proofed, Room temp., 1s on 9s off. An energising voltage over the abver range may damage the insulation of relay coil. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 255