HF161F/24-HT(257)

H F1 6 1F MINIATURE HIGH POWER RELAY Features File No.: E134517 ● 4.5kV dielectric strength (between coil and contacts) V D E ● Heavy load up to 6250VA File No.: 40031410 ● Ideal for motor switching ● PCB layouts available ● UL insulation system: Class F File No.:CQC10002050943 CQC18002203499 RoHS compliant COIL CONTACT DATA Contact arrangement 1A Contact resistance1) 100m max.(at 1A 6VDC) Contact material AgSnO2, AgCdO Resistive: 20A 250VAC Motor: 2HP 250VAC Contact rating Max. switching voltage 250VAC Max. switching current Resistive: 25A Max. switching power 6250VA 2 x 106OPS Mechanical endurance HT type: 1 x 105OPS (20A 250VAC, Resistive load, Room temp., 1.5s on 1.5s off) Electrical endurance Notes: 1)The data shown above are initial values. Approx. 900mW Coil power COIL DATA at 23 Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) 5 3.5 0.5 6.0 27.8 x (1 10%) 12 8.4 1.2 14.4 160 x (1 10%) 24 16.8 2.4 28.8 640 x (1 10%) 48 33.6 4.8 57.6 2560 x (1 10%) Nominal Voltage VDC Max. Voltage VDC * 2) Coil Resistance Notes: 1)The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Between coil & contacts 4500VAC 1min Between open contacts 1000VAC 1min Surge voltage (between coil & contacts) 10kV (1.2 / 50µs) Dielectric strength 25A 250VAC at 85 C 20A 250VAC at 85 C 2HP 250VAC at 85 C o UL/CUL o o Operate time (at rated. volt.) 20ms max. Release time (at rated. volt.) 10ms max. Temperature rise (at rated. volt.) Shock resistance 60K max. Functional 196m/s2 Destructive 980m/s2 Vibration resistance 25A 250VAC at 85 C o VDE 20A 250VAC at 85 C o Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. 10Hz to 55Hz 1.5mm DA Ambient temperature Humidity -40 to 85 5% to 85% RH Termination PCB Unit weight Approx. 21g Construction Flux proofed Notes: The data shown above are initial values. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 282 2020 Rev. 1.00 ORDERING INFORMATION HF 1 61 F / 12 -H T (XXX) Type Coil voltage 5, 12, 24, 48VDC Contact arrangement H: 1 Form A Contact matcrial T: AgSnO2 Special code3) XXX: Customer special requirement Nil: AgCdO Nil: Standard Notes: 1) Water cleaning or surface process is not suggested after the flux-proofed relays are assembled on PCB. 2) Flux-proofed relays can not be used in the environment with pollutants like H2S, SO2, NO2, dust, etc. 3) The customer special requirement express as special code after evaluating by Hongfa. e.g. (414) stands for product with coil terminal of 1.4X0.4. 4) Two packing methods available: plastic tray package, tube package,Standard tube packing length is 592mm. Any special requirement needed, please contact us for more details. 5) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions Standard type 30.4 ±0.3 15.9 ±0.3 +0.2 2- (0.8 ±0.3 )x(1.5 ±0.3 ) 2xØ 0.7- 0 . 0 5 (414) special code version 30.4 ±0.3 +0.2 +0.2 15.9 ±0.3 2-(0.8 ±0.3 )x(1.5 ±0.3 ) 2-1.4- 0 . 0 5x0.4- 0 . 0 5 283 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm PCB Layout (Bottom view) Standard type (414) special code version 27.6 ±0.1 12 ±0.05 22 ±0.1 Wiring Diagram Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. CHARACTERISTIC CURVES ENDURANCE CURVE MAXIMUM SWITCHING POWER 500 100 50 AC Resistive Load 250VAC Inductive Load (cosØ=0.4) 10 100 5 50 250VAC Resistive Load 1 250VAC Inductive Load (cosØ=0.4) 0.5 10 0.1 1 10 20 30 100 200 300 1000 Contact Voltage (V) 0 2 4 6 8 10 12 14 16 18 20 22 Contact Current (A) Test conditions: Room temp., 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 284