HF165FD/24-HY2STF(257)

H F1 6 5FD MINIATURE HIGH POWER RELAY Features File No.: E134517 ● 30A switching capability ● Breakdown voltage (between contact and coil): 4kV ● Creepage distance: 5.5mm(high voltage) V D E ● Plastic sealed and flux proofed types available ● Product in accordance to IEC 60335-1 available ● UL insulation system: Class F File No.: 40043143 File No.: CQC15002130956 CQC18002199524 RoHS compliant COIL CONTACT DATA 1A Contact arrangement 1B Contact resistance1) Coil power 1C 100m max. (at 1A 6VDC) AgSnO2 Contact material 30A 277VAC Contact rating (Res. load) 15A 20A 277VAC 277VAC Max. switching voltage Max. switching current 30A 30A 30A Max. switching power 8310VA 8310VA 8310VA COIL DATA Max. Voltage VDC2) 5 Drop-out Voltage VDC min1) 0.5 6.5 27 x (1 10%) 6 4.50 0.6 7.8 40 x (1 10%) 9 6.75 0.9 11.7 97 x (1 10%) Nominal Voltage VDC 277VAC 4155VA at 23 Pick-up Voltage VDC max1) 3.75 10A 277VAC 15A Approx. 900mW Coil Resistance Mechanical endurance 1 x 107OPS 2) 1 x 105OPS (NO: 30A 277VAC， 12 9.00 1.2 15.6 155 x (1 10%) Resistive load, Room temp., 1s on 9s off) 15 11.25 1.5 19.5 256 x (1 10%) 18 13.50 1.8 23.4 380 x (1 10%) 24 18.00 2.4 31.2 660 x (1 10%) Electrical endurance Notes: 1) The data shown above are initial values. 2) For plastic sealed type, the venting-hole should be opened in electrical endurance test. CHARACTERISTICS Insulation resistance Between open contacts Dielectric Between strength coil & contacts 1000M (at 500VDC) 1500VAC 1min 2500VAC 1min(Standard) 4000VAC 1min(V Type) Surge voltage 6kV (1.2/50µs) Operate time (at rated. volt.) 15ms max. Release time (at rated. volt.) 10ms max. Shock resistance Functional 98m/s2 Destructive 980m/s2 Vibration resistance 10Hz to 55Hz 1.5mm DA Humidity 48 3) 36.00 4.8 62.4 2560 x (1 10%) 70 3) 52.50 7.0 91.0 5500 x (1 10%) 3) 82.50 11.0 143.0 13450 x (1 10%) 110 Notes: 1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). SAFETY APPROVAL RATINGS Termination Approx. 25g Construction Plastic sealed Flux proofed Notes: 1) The data shown above are initial values. 30A 277VAC at 40℃ 20A 277VAC at 85℃ 15A 277VAC at 40℃ -40℃ to 85℃ NO PCB Unit weight NC UL/CUL 5% to 85% RH Ambient temperature NO 30A 277VAC at 85℃ 20A 277VAC at 105℃ 2HP 240VAC/1HP 120VAC at 40℃ 96LRA 30FLA 277VAC at 40℃ TV-8 125VAC at 40℃ VDE NC CO 30A 250VAC at 60℃ 20A 250VAC at 85℃ 15A 250VAC at 85℃ 20A/10A 250VAC at 85℃ Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001、ISO/TS16949、ISO14001、OHSAS18001、IECQ QC 080000 CERTIFIED 2019 Rev. 1.00 297 ORDERING INFORMATION HF 1 6 5F D / 12 -H Y1 S T F V (XXX) Type Coil voltage 5, 6, 9, 12, 15, 18, 24, 48, 70, 110 Contact arrangement H: 1 Form A D: 1 Form B Z: 1 Form C Termination Construction Y1: Without Pin NO.6 1) S: Plastic sealed Contact material Y2: With Pin NO.6 Nil: Flux proofed T: AgSnO2 Insulation standard F: Class F Dielectric strength standard Nil: Standard product(2500VAC Between coil & contacts) V : High Dielectric strength(Only for Y1 Termination) (4000VAC Between coil & contacts) Special code2) XXX: Customer special requirement Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions PCB Layout (Bottom view) HF165FD/□□-HY1□□□□ HF165FD/□□-HY1□□□□ 27.5 3.3 20.4 Unit: mm 4.85 2x 2.1 3.8 4.8 2x 1.1 2.7 14 17.8 HF165FD/□□-HY2□□□□ HF165FD/□□-HY2□□□□ 27.5 3.3 20.4 4.85 3x 2.1 3.8 4.8 4.8 2.7 2x 1.1 8.9 14 17.8 298 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions PCB Layout (Bottom view) HF165FD/□□-DY1□□□□ HF165FD/□□-DY1□□□□ 2x 2.1 27.5 3.3 Unit: mm 20.4 4.85 3.8 4.8 2x 1.1 2.7 14 17.8 HF165FD/□□-DY2□□□□ HF165FD/□□-DY2□□□□ 3x 2.1 27.5 3.3 20.4 4.85 3.8 4.8 2x 1.1 8.9 2.7 14 17.8 HF165FD/□□-ZY1□□□□ 27.5 3.3 20.4 HF165FD/□□-ZY1□□□□ 4.85 3x 2.1 4.8 3.8 2.7 2x 1.1 14 17.8 HF165FD/□□-ZY2□□□□ HF165FD/□□-ZY2□□□ 27.5 3.3 20.4 4x 2.1 4.85 4.8 3.8 2.7 2x 1.1 8.9 14 17.8 299 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Wiring Diagram (Bottom view) HF165FD/□□-HY1□□□□ HF165FD/□□-ZY1□□□□ HF165FD/□□-DY1□□□□ 3 3 5 4 2 1 5 4 HF165FD/□□-DY2□□□□ HF165FD/□□-HY2□□□□ HF165FD/□□-ZY2□□□□ 3 3 5 4 1 5 4 2 6 2 1 2 1 4 1 6 4 1 2 6 2 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.5mm. CHARACTERISTIC CURVES 100 COIL OPERATING RANGE (AC) ENDURANCE CURVE MAXIMUM SWITCHING POWER 140 100 120 30 1A 1A 1C(NO) 1B 30 100 10 20 1C (NO) 1C (NC) 15 80 1C (NC) 10 1B 0A 10A 20A 60 1 AC Resistive Load 40 30A 20 1 10 100 200 1000 Contact Voltage (V) 0 0 10 20 30 40 70 80 90 100 Contact Current (A) Test conditions: Flux proofed, Room temp., 1s on 9s off. 110 120 130 140 150 Coil Voltage(U/Un) Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 300