HF2110-1A-24DF(257)

HF2 11 0 /HF2 1 20 MINIATURE HIGH POWER RELAY Features ● 30A switching capability ● PCB coil terminals, ideal for heavy duty load ● 2.5kV dielectric strength (between coil and contacts) File No.:E134517 ● Unenclosed type available File No.:CQC10002049166 RoHS compliant COIL CONTACT DATA Contact arrangement 1A 1B Contact resistance1) Contact material 1C(NO) 1C(NC) AgSnO2, AgCdO 30A 240VAC Max. switching power Max. switching voltage Max. switching current Mechanical endurance Electrical endurance 20A 30VDC 10A 30VDC 20A 30VDC 10A 30VDC 11080VA 4511VA 5540VA 2770VA 1200W 450W 600W 300W 27 x (1 10%) 6 4.50 0.6 7.8 40 x (1 10%) 9 6.75 0.9 11.7 97 x (1 10%) 12 9.00 1.2 15.6 155 x (1 10%) 15 11.25 1.5 19.5 256 x (1 10%) 18 13.50 1.8 23.4 380 x (1 10%) 24 18.00 2.4 31.2 660 x (1 10%) 1000M (at 500VDC) 48 36.00 4.8 62.4 2560 x (1 10%) HF2110/HF2120: 2500VAC 1min HF2111/HF2121: 2000VAC 1min 70 52.50 7.0 91.0 5500 x (1 10%) 110 82.50 11.0 143.0 13450 x (1 10%) 15A 20A 10A CHARACTERISTICS 1500VAC 1min Operate time (at rated. volt.) 15ms max. Release time (at rated. volt.) 10ms max. Functional Shock resistance Destructive Vibration resistance Coil Resistance 6.5 1A type: 1 x 105OPS (30A 240VAC, Resistive load, AgCdO, Room temp., 1s on 9s off) Ambient temperature Drop-out Max. Voltage Voltage VDC VDC* 2) min.1) 0.5 1 x 107OPS Between open contacts Pick-up Voltage VDC max.1) 3.75 40A Between coil & contacts Nominal Voltage VDC at 23 5 277VAC / 30VDC Insulation resistance COIL DATA 15A 240VAC 20A 240VAC 10A 240VAC Notes: 1) The data shown above are initial values. Humidity Approx. 900mW 50m max.(at 1A 24VDC) Contact rating (Res. load) Dielectric strength Coil power Notes: 1) The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. -55 C to 85 C o o 98m/s2 980m/s2 10Hz to 55Hz 1mm DA 5% to 85% RH Termination HF2110/2111: PCB HF2120/2121: PCB & QC Unit weight Approx. 25g Construction Unenclosed Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 3) UL insulation system: Class F, Class B. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.00 331 SAFETY APPROVAL RATINGS UL/CUL Load type General purpose Resistive Ballast Volts 1 Form A 125/240VAC 30A 1 Form B 1 Form C (NO) 1 Form C (NC) 15A 30A 15A 30A 30A 20A 10A 277VAC 30A 30A 125/240VAC 30A 15A 30VDC 20A 10A 277VAC 20A 240VAC 15A 250VAC 40A 125/240/277VAC 6A 3A 6A 125VAC 800VA 290VA 800VA 40A 3A 290VA 125VAC 690VA 690VA 125VAC 800VA 800VA 240VAC 1152VA 277VAC 764VA 125VAC 1HP 1/4HP 240VAC 2HP 1HP 125VAC 1HP 1HP 125/277VAC 3/4HP 3/4HP 120VAC 82.8LRA, 13.8FLA 82.8LRA, 13.8FLA Definite 125VAC 96LRA, 30FLA 33LRA, 10FLA purpose 125VAC 60LRA, 20FLA 30LRA, 12FLA (LRA- 125VAC 82.8LRA, 27FLA Pilot duty Motor load 768VA 1152VA 768VA 764VA 1HP 1/4HP 2HP 1HP 60LRA, 20FLA 33LRA, 10FLA 60LRA, 20FLA 30LRA, 12FLA 82.8LRA, 27FLA loaded rotor) 240VAC 80LRA, 30FLA (FLA-full load) 240VAC 41.4LRA, 6.9FLA 41.4LRA, 6.9FLA 277VAC 60LRA, 20FLA 60LRA, 20FLA 125VAC 15A 15A 240VAC 5A 5A Tungsten 33LRA, 10FLA 120VAC 3A 240VAC 3A 60LRA, 20FLA 33LRA, 10FLA 3A Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION Type Contact arrangement H F2 11 0 H F2 12 0 -1 A - 12 D T F (XXX) 1A: 1 Form A 1B: 1 Form B 1C: 1 Form C Coil voltage 5, 6, 9, 12, 15, 18, 24, 48, 70, 110VDC Contact material T: AgSnO2 Nil: AgCdO Insulation standard F: Class F Nil: Class B Special code5) XXX: Customer special requirement Nil: Standard Notes: 1) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage. 2) Relays may be damaged because of falling or when shocking conditions exceed the requirement. 3) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay". 4) For unenclosed type, beaucause there is no cover protection, the products may be contaminate by particles during transportation assembly or usage, which may cause relay failure, so the produces should be effectively protected at customer side, Hongfa suggest to use HF2150/HF2160 type, if no other special requirement. 5) The customer special requirement express as special code after evaluating by Hongfa. 332 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form A Outline Dimensions HF2111 Wiring Diagram PCB Layout (Bottom view) (Bottom view) 23.5 3.6 15.3 4.1 3.8 3x 2.1 2x 1.1 8.9 14 17.8 HF2110 23.5 3.6 15.3 4.1 3.8 2x 2.1 2x 1.1 14 17.8 1 Form B HF2111 23.5 3.6 15.3 4.1 3x 2.1 3.8 2x 1.1 8.9 14 17.8 HF2110 23.5 3.6 15.3 4.1 2x 2.1 3.8 2x 1.1 14 17.8 333 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form C Outline Dimensions Wiring Diagram (Bottom view) PCB Layout (Bottom view) HF2111 23.5 15.3 3.6 4x 2.1 4.1 3.8 2x 1.1 8.9 14 17.8 HF2110 23.5 3x 2.1 4.1 15.3 3.6 3.8 2x 1.1 14 17.8 1 Form A HF2121 25.9 23.5 4.1 3.6 15.7 3.8 3x 2.1 2x 1.1 (Bottom view) (Top view) 8.9 14 17.8 HF2120 25.9 23.5 4.1 3.6 15.7 3.8 2x 2.1 2x 1.1 (Bottom view) 334 (Top view) 14 17.8 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form B Outline Dimensions Wiring Diagram PCB Layout (Bottom view) (Bottom view) HF2121 25.9 23.5 4.1 3.6 3x 2.1 15.7 3.8 (Bottom view) (Top view) 2x 1.1 8.9 14 17.8 HF2120 25.9 23.5 4.1 3.6 15.7 2x 2.1 3.8 2x 1.1 (Bottom view) (Top view) 14 17.8 1 Form C HF2121 23.5 25.9 3.6 4x 2.1 15.7 3.8 2x 1.1 (Bottom view) (Top view) 8.9 14 17.8 HF2120 23.5 25.9 3.6 3x 2.1 15.7 3.8 (Bottom view) (Top view) 2x 1.1 14 17.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 335 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER 100 110 100 1A 90 1C (NO) 20 100 30 1A 40 30 10 1C (NO) 1B 15 80 1C (NC) 1C (NC) 10 COIL TEMPERATURE RISE ENDURANCE CURVE 1B 70 30A 60 1 AC Load 25A 20A 50 15A 40 DC Load 0A 1 10 100 200 1000 Contact Voltage (V) 0 10 20 30 40 Contact Current (A) 0 80 90 100 110 120 130 140 150 160 Percentage Of Nominal Coil Voltage Test conditions: Resistive load, AgCdO, Room temp., 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 336