HF2150-1A-15DEF(257)

HF2 1 50/ HF 215 1 MINIATURE HIGH POWER RELAY Features File No.:E134517 ● 30A switching capability ● PCB coil terminals, ideal for heavyduty load ● Heavy load up to 7200VA File No.: R50153835 ● Plastic sealed and Dust protected type available File No.:CQC10002049166 CQC16002139675 RoHS compliant CONTACT DATA Contact arrangement Contact resistance1) Contact material COIL 1A 1B 1C(NO) 1C(NC) AgSnO2, AgCdO 30A 240VAC 15A 240VAC 20A 240VAC 10A 240VAC 20A 30VDC 10A 30VDC 20A 30VDC 10A 30VDC Max. switching power 11080VA 1200W 4155VA 450W 5540VA 600W Max. switching voltage 2770VA 300W 277VAC / 30VDC 40A2) 15A 27 x (1 10%) 6 4.50 0.6 7.8 40 x (1 10%) 9 6.75 0.9 11.7 97 x (1 10%) 12 9.00 1.2 15.6 155 x (1 10%) 15 11.25 1.5 19.5 256 x (1 10%) 18 13.50 1.8 23.4 380 x (1 10%) 24 18.00 2.4 31.2 660 x (1 10%) 48 36.00 4.8 62.4 2560 x (1 10%) HF2150: 2500VAC 1min 70 52.50 7.0 91.0 5500 x (1 10%) HF2151: 2000VAC 1min 110 82.50 11.0 143.0 13450 x (1 10%) 20A 10A Notes:1) The data shown above are initial values. 2) Long time current-carrying under 40A condition is prohibited. CHARACTERISTICS 1000M (at 500VDC) 1500VAC 1min Operate time (at rated. volt.) 15ms max. Release time (at rated. volt.) 10ms max. Functional Shock resistance Destructive Vibration resistance Coil Resistance 6.5 1A type(Non-plastic sealed): 1 x 105OPS (30A 240VAC, Resistive load, AgCdO, Room temp., 1s on 9s off) Ambient temperature Max. Voltage VDC *2) 0.5 Electrical endurance Dielectric Between coil & contacts strength Between open contacts at 23 Nominal Pick-up Drop-out Voltage Voltage Voltage VDC VDC VDC max.1) min.1) 3.75 1 x 107OPS Insulation resistance COIL DATA 5 Mechanical endurance Humidity Approx. 900mW 50m max.(at 1A 24VDC) Contact rating (Res. load) Max. switching current Coil power Notes:1) The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. -55 C to 85 C o o 98m/s2 980m/s2 10Hz to 55Hz 1.5mm DA 5% to 85% RH Termination PCB Unit weight Approx. 30g Construction Plastic sealed, Dust protected Notes: 1) For plastic sealed type, the venting-hole should be opened in test. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. 4) UL insulation system: Class F, Class B. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.00 337 SAFETY APPROVAL RATINGS UL/CUL Contact material Load type Volts General purpose 1 Form B 30A 15A 277VAC 30A 30A 30A 30A 125/240VAC 30A 15A 10A 20A 10A 30VDC 20A 277VAC 20A 240VAC 15A 250VAC 40A 125/240/277VAC 6A 3A 6A 3A 125VAC 800VA 290VA 800VA 290VA 40A 125VAC 690VA 690VA 125VAC 800VA 800VA 240VAC 1152VA 277VAC 764VA 768VA 1152VA 768VA 764VA 125VAC 1HP 1/4HP 1HP 1/4HP 240VAC 2HP 1HP 2HP 1HP 125VAC 1HP 125/277VAC 3/4HP 3/4HP 120VAC 82.8LRA, 13.8FLA 82.8LRA, 13.8FLA AgCdO Motor load Definite 1HP 125VAC 96LRA, 30FLA 33LRA, 10FLA purpose 125VAC 60LRA, 20FLA 30LRA, 12FLA (LRA- 125VAC 82.8LRA, 27FLA loaded rotor) 240VAC 80LRA, 30FLA (FLA-full load) Tungsten 60LRA, 20FLA 33LRA, 10FLA 60LRA, 20FLA 30LRA, 12FLA 82.8LRA, 27FLA 33LRA, 10FLA 60LRA, 20FLA 33LRA, 10FLA 240VAC 41.4LRA, 6.9FLA 41.4LRA, 6.9FLA 277VAC 60LRA, 20FLA 60LRA, 20FLA 125VAC 15A 15A 240VAC 5A 5A 120VAC 3A 3A 240VAC 3A 125/240VAC 30A Resistive 250VAC 40A General purpose 240VAC AgSnO2 1 Form C (NC) 15A Pilot duty General purpose 1 Form C (NO) 30A Resistive Ballast 1 Form A 125/240VAC 15A Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION HF 2 1 50 HF 2 1 51 Type -1 A - 12D E T F (XXX) Contact arrangement 1A: 1 Form A 1B: 1 Form B 1C: 1 Form C Coil voltage 5, 6, 9, 12, 15, 18, 24, 48, 70, 110VDC Construction1) E: Plastic sealed Nil: Dust protected Contact material T: AgSnO2 Nil: AgCdO Insulation standard F: Class F Nil: Class B Special code3) XXX: Customer special requirement Nil: Standard Notes:1)We recommend dust protected types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust,etc.). 2)Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3)The customer special requirement express as special code after evaluating by Hongfa. 4)For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. 338 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form A Outline Dimensions HF2151 3.6 Wiring Diagram PCB Layout (Bottom view) (Bottom view) 27 19.1 5.3 3x 2.1 3.8 5 2x 1.1 2.3 8.9 14 17.8 HF2150 27 3.6 19.1 5.3 3.8 5 2x 2.1 2x 1.1 2.3 14 17.8 1 Form B HF2151 27 3.6 19.1 3x 2.1 5.3 3.8 5 2.3 8.9 2x 1.1 14 17.8 HF2150 27 3.6 19.1 2x 2.1 5.3 3.8 5 2.3 2x 1.1 14 17.8 339 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form C Outline Dimensions Wiring Diagram PCB Layout (Bottom view) (Bottom view) HF2151 27 19.1 3.6 4x 2.1 5.3 3.8 5 2x 1.1 2.3 8.9 14 17.8 HF2150 27 19.1 3.6 3x 2.1 5.3 3.8 5 2x 1.1 2.3 14 17.8 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB lauout is always ±0.1mm. CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER COIL TEMPERATURE RISE ENDURANCE CURVE 110 100 100 DC Coil 1A 40 1C (NO) 30 1B 20 1C (NC) 15 100 30 1A 90 10 1C (NO) 80 1C (NC) 1B 10 70 30A 60 1 AC Resistive Load 15A 40 DC Resistive 1 Load 10 25A 20A 50 0A 100 200 1000 Contact Voltage (V) 0 10 20 30 40 Contact Current (A) 0 80 90 100 110 120 130 140 150 160 Percentage Of Nominal Coil Voltage Test conditions: Resistive load, AgCdO, Dust protected, Room temp., 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 340