HF21FF/024-1ZS(257)

H F2 1 F F SUBMINIATURE HIGH POWER RELAY Features ● 15A switching capability ● 1 Form A, 1 Form B and 1 Form C configurations ● Standard PCB layout ● Plastic sealed and dust protected types available File No.:E133481 RoHS compliant CONTACT DATA Contact arrangement COIL 1A, 1B Contact resistance1) 1C 100m max.(at 1A 6VDC) Contact material Contact rating 5VDC to 24VDC: Approx. 360mW; 48VDC: Approx. 530mW Coil power AgSnO2 15A 120VAC 10A 120VAC/24VDC COIL DATA at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) Max. Voltage VDC *2) 5 3.75 0.5 6.5 70 x (1 10%) 6 4.50 0.6 7.8 100 x (1 10%) 9 6.75 0.9 11.7 225 x (1 10%) 12 9.00 1.2 15.6 400 x (1 10%) Notes: 1) The data shown above are initial values. 18 13.5 1.8 23.4 900 x (1 10%) CHARACTERISTICS 24 18.0 2.4 31.2 1600 x (1 15%) 48 36.0 4.8 62.4 4500 x (1 15%) Max. switching voltage Max. switching current 120VAC / 30VDC 15A 10A Max. switching power 1800VA / 240W 1 x 107 OPS Mechanical endurance Electrical endurance 1H type: 1 x 105OPS (15A 120VAC, Resistive load, Room temp., 1s on 9s off) Insulation resistance Dielectric Between coil & contacts strength Between open contacts 100M (at 500VDC) 1500VAC 1min 750VAC 1min Operate time (at rated. volt.) 10ms max. Release time (at rated. volt.) 5ms max. Shock resistance Functional 98m/s Destructive 980m/s2 Vibration resistance Notes: 1) The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS 2 10A 120VAC 1 Form C 10Hz to 55Hz 1.5mm DA 5% to 85% RH Humidity Coil Resistance 15A 120VAC 1 Form A TV-5 120VAC UL/CUL o Operation temperature range -40 15A 120VAC 1800VA at 25 C, Ballast to 70 o Termination PCB Unit weight Approx. 13g Construction Plastic sealed, Dust protected Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 3) UL insulation system: Class F, Class B. 1 Form B 6.5A 277VAC 1800VA at 25 C, Ballast o 8.3A 120VAC 1000VA at 90 C, Ballast o 3.6A 277VAC 1000VA at 90 C, Ballast Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.10 189 ORDERING INFORMATION H F2 1F F / 0 12 - 1H S T F (XXX) Type Coil voltage 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement 1H: 1 Form A 1D: 1 Form B 1Z: 1 Form C Construction 1) S: Plastic sealed Contact material T: AgSnO2 Insulation standard F: Class F Special code3) XXX: Customer special requirement Nil: Dust protected Nil: Class B Nil: Standard Notes: 1) Under the ambience with dangerous gas like H2S, SO2 or NO2, plastic sealed type is recommended; Please test the relay in real applications. If the ambience allows, dust protected type is preferentially recommended. 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 20.2 Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 4x 1.3 16.5 1 Form A 2 12.2 4 0.5 1 1 1 0.4 0.5 16.5 20.2 1 Form B 4x 1.3 1 0.4 0.5 190 2 1 0.5 1 12.2 4 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 20.2 Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 16.5 5x 1.3 1 Form C 2 0.5 1 1 0.4 12.2 4 1 0.5 Remark:1) * The additional tin top is max. 1mm. 2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 3) The tolerance without indicating for PCB layout is always ±0.1mm. CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 100 50 90 80 AC Resistive load 20 70 NO 10 60 10 50 4 5 40 NC 3 2 30 DC Resistive load 1 10 30 100 200 300 400 Contact Voltage (VAC) 0 5 10 15 0 80 Test conditions: NO: Resistive load, Room temp., flux proofed, 15A 120VAC, 1s on 9s off NC: Resistive load, Room temp., flux proofed, 10A 120VAC, 1s on 9s off 90 100 110 120 130 Coil Power (W) Contact Current (A) Testing conditions: 10A at 70 Mounting distance: 25mm . Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 191