HF32FA/006-HL1(257)

HF3 2 FA SUBMINIATURE INTERMEDIATE POWER RELAY Features ● 5A switching capability File No.:E134517 ● Creepage/clearance distance>8mm ● 5kV dielectric strength (between coil and contacts) V D E ● 1 Form A meets VDE 0700, 0631 reinforce insulation ● 1 Form C meets VDE 0631 reinforce insulation File No.:40006182 ● UL insulation system: Class F ● Product in accordance to IEC 60335-1 available File No.:CQC17002175721 RoHS compliant CONTACT DATA COIL DATA Contact arrangement 1A, 1C Contact resistance1) 70m max.(at 1A 6VDC) AgNi Contact material 1A Standard / Sensitive Contact rating (Res. Load) 1C Standard Standard type Nominal Pick-up Voltage Voltage VDC VDC max.1) at 23 Drop-out Voltage VDC min.1) Max. Voltage VDC 2) Coil Resistance 3 2.25 0.15 3.9 20 x (1 10%) 5 3.75 0.25 6.5 55 x (1 10%) 6 9 4.50 6.75 0.30 0.45 7.8 11.7 180 x (1 10%) Max. switching voltage 3A 250VAC 3A 30VDC 250VAC / 30VDC Max. switching current 5A 12 9.00 0.60 15.6 320 x (1 10%) 1250VA / 150W 18 13.5 0.90 23.4 720 x (1 10%) 1 x 106OPS H type: 1 x 10 OPS (5A 250VAC, Resistive load, Room temp., 1.5s on 1.5s off) Z type: 1 x 105OPS (NO/NC, 3A 250VAC, Resistive load, Room temp., 1.5s on 1.5s off) 24 18.0 1.20 31.2 1280 x (1 10%) 5A 250VAC 5A 30VDC Max. switching power Mechanical endurance 5 Electrical endurance Notes: 1) The data shown above are initial values. Dielectric Between coil & contacts strength Between open contacts 2.25 0.15 5.1 45 x (1 10%) 3.75 0.25 8.5 125 x (1 10%) 1000M (at 500VDC) 6 4.50 0.30 10.2 180 x (1 10%) 5000VAC 1min 9 6.75 0.45 15.3 400 x (1 10%) 1000VAC 1min 12 9.00 0.60 20.4 720 x (1 10%) 8ms max. 18 13.5 0.90 30.6 1600 x (1 10%) 4ms max. 24 18.0 1.20 40.8 2800 x (1 10%) Release time (at rated. volt.) 5% to 85% RH Ambient temperature -40 to 85 Shock resistance* Functional 98m/s2 Destructive 980m/s2 Vibration resistance* NO 10Hz to 55 Hz 1.65mm DA NC 10Hz to 55 Hz PCB Unit weight Approx.4.6g SAFETY APPROVAL RATINGS 1 Form A UL/CUL 1 Form C Plastic sealed, Flux proofed Notes: 1) *Index is not in relay length direction. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. COIL Coil power Notes: 1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). 0.6mm DA Termination Construction Sensitive: Approx. 200mW; Standard: Approx. 450mW VDE 5A 250VAC 5A 30VDC 1/8HP 125VAC/250VAC TV-2 C300 3A 250VAC 3A 30VDC 5A 250VAC at 85 2A 250VAC cos =0.5 at 85 1 Form A, Sensitive: 3A 400VAC at 85 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 120 Coil Resistance 3 Operate time (at rated. volt.) Humidity 5120 x (1 10%) 5 CHARACTERISTICS Insulation resistance 48 2) 36.0 2.40 62.4 Sensitive type (Only for 1 Form A) Max. Nominal Pick-up Drop-out Voltage Voltage Voltage Voltage VDC VDC VDC 2) VDC max.1) min.1) 80 x (1 10%) 2020 Rev. 1.00 ORDERING INFORMATION H F 3 2 FA / 012 -H S L 1 G (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement H: 1 Form A Z: 1 Form C Construction1)2) S: Plastic sealed Coil power L: Sensitive (Only for 1 Form A) Termination 1: Type 1 Contact plating 3) G: Gold plated Special code4) Nil: Flux proofed Nil: Standard 2: Type 2 Nil: No gold plated XXX: Customer special requirement Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) For gold plated type, the min. switching current and min. switching voltage is 10mA 5VDC. 4) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 5) Two packing methods available: paper box package, tube package,Standard tube packing length is 535mm. Any special requirement needed, please contact us for more details. 6) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 15.24 17.6 10.1 2.54 2x 1 2x 1.3 1 Form A & Type 1 1.4 0.96 2-0.3x0.8 2xØ0.5 1 Form C & Type 1 15.24 10.1 17.6 2.54 2x 1 3x 1.3 1.4 4 0.96 3-0.3x0.8 2xØ0.5 121 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 2x 1.3 10.1 17.6 12.7 2x 1 1 Form A 2.54 & Type 2 0.96 1.4 2-0.3x0.8 2xØ0.5 17.6 10.1 2.54 12.7 2x 1 1 Form C 3x 1.3 & Type 2 0.96 1.4 1.5 3-0.3x0.8 2xØ0.5 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.54mm. CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER TEMPERATURE RISE ENDURANCE CURVE 60 5 H type Z type 2 100 50 50 40 HL type A 1 Standard 30 B 10 0.5 250VAC, Resistive Load(NO) DC Resistive Load 5 Sensitive 20 250VAC, Resistive Load(NC) AC Resistive Load 0.2 10 0.1 10 20 30 100 200 300 400 Contact Voltage (V) 0 5 10 15 Contact Current (A) 0 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Notes: 1) Curve A: H type, Curve B: Z type 2) Test conditions: Flux proofed, Room temp., 1.5s on 1.5s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 122