HF32FA-G/012-HSL1(257)

HF3 2 FA-G SUBMINIATURE INTERMEDIATE POWER RELAY Features File No.:E134517 ● 10A switching capability ● Creepage/clearance distance>8mm V D E ● 5kV dielectric strength (between coil and contacts) ● UL insulation system: Class F File No.:40006182 ● Meets VDE 0700, 0631 reinforce insulation ● Product in accordance to IEC 60335-1 available File No.:CQC17002175721 RoHS compliant COIL DATA CONTACT DATA Contact arrangement 1A Contact resistance1) 70m max.(at 1A 6VDC) Contact material AgSnO2 Contact rating (Res. Load) 3 2.25 0.15 3.9 20 x (1 10%) 5 3.75 0.25 6.5 55 x (1 10%) 10A 7.8 80 x (1 10%) 6 4.50 0.30 2500VA 9 6.75 0.45 11.7 180 x (1 10%) 1 x 106 OPS 12 9.00 0.60 15.6 320 x (1 10%) 1.5 x 104 OPS (10A 250VAC, 18 13.5 0.90 23.4 720 x (1 10%) Resistive load, at 85 , 1s on 9s off) 24 1.20 31.2 1280 x (1 10%) 2.40 62.4 5120 x (1 10%) Max. switching power Mechanical endurance Notes: 1) The data shown above are initial values. Insulation resistance Dielectric Between coil & contacts strength Between open contacts 1000M (at 500VDC) 5000VAC 1min 1000VAC 1min Operate time (at rated. volt.) 8ms max. Release time (at rated. volt.) 4ms max. 5% to 85% RH Shock resistance* -40 to 85 5.1 38 x (1 10%) 5 3.75 0.25 8.5 108 x (1 10%) 6 4.50 0.30 10.2 155 x (1 10%) 9 6.75 0.45 15.3 350 x (1 10%) 12 9.00 0.60 20.4 620 x (1 10%) 13.5 0.90 30.6 1390 x (1 10%) 18.0 1.20 40.8 2480 x (1 10%) 2.40 81.6 9920 x (1 10%) 98m/s 24 Unit weight Approx.4.6g Plastic sealed, Flux proofed Notes: 1) *Index is not in relay length direction. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. 4) For plastic sealed type, the venting-hole should be excised in electrical endurance test. 48 3) 36.0 Notes: 1) The data shown above are initial values. 2) Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 3) For products with rated voltage ≥ 48V, measures should be taken to prevent coil overvoltage in order to protect coil in test and application (eg. Connect diodes in parallel). SAFETY APPROVAL RATINGS UL/CUL 10A 250VAC at 85 B300 VDE 10A 250VAC at 85 COIL Coil power Standard: Approx. 450mW; Sensitive: Approx. 230mW Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 126 Coil Resistance 0.15 980m/s2 PCB Max. Voltage VDC2) 2.25 Destructive 10Hz to 55 Hz 1.65mm DA Drop-out Voltage VDC min.1) 3 Functional 2 Termination Construction 48 36.0 Sensitive type Nominal Pick-up Voltage Voltage VDC VDC max.1) 18 Vibration resistance* 18.0 3) CHARACTERISTICS Ambient temperature Coil Resistance 250VAC Max. switching current Humidity Max. Voltage VDC 2) 10A 250VAC Max. switching voltage Electrical endurance at 23 Standard type Nominal Pick-up Drop-out Voltage Voltage Voltage VDC VDC VDC max.1) min.1) 2020 Rev. 1.00 ORDERING INFORMATION H F3 2FA -G / 0 12 - H S L 1 G (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement H: 1 Form A Construction1)2) S: Plastic sealed Coil power L: Sensitive Termination 1: Type 1 Contact plating 3) G: Gold plated Special code4) Nil: Flux proofed Nil: Standard 2: Type 2 Nil: No gold plated XXX: Customer special requirement Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) For gold plated type, the min. switching current and min. switching voltage is 10mA 5VDC. 4) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 5) Two packing methods available: paper box package, tube package,Standard tube packing length is 535mm. Any special requirement needed, please contact us for more details. 6) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 17.6 10.1 Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 15.24 2x 1 2.54 2x 1.3 1 Form A & Type 1 1.4 0.96 2x0.3x0.8 2xØ0.5 2x 1.3 10.1 17.6 2x 1 12.7 2.54 1 Form A & Type 2 1.4 0.96 2x0.3x0.8 2xØ0.5 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.54mm. 127 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER TEMPERATURE RISE ENDURANCE CURVE 100 70 10 60 5 50 250VAC Resistive 10 40 1 30 0.5 1 20 AC Resistive Load 0.2 10 0.1 10 20 30 100 200 300 400 Contact Voltage (V) 0 0 2 4 6 8 10 12 14 16 Contact Current (A) 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Test conditions: Flux proofed, at 85 5s on 5s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 128