HF32FA-T/012-HSL2(257)

SUBMINIATURE INTERMEDIATE HIGH TEMPERATURE POWER RELAY HF 3 2FA-T Features ● ● ● ● ● ● ● ● File No.:E134517 V D E File No.:40006182 High temperature: 105 5A switching capability 1 Form A configuration Creepage/clearance distance>8mm 5kV dielectric strength (between coil and contacts) UL insulation system: Class F Meeting VDE 0700, 0631 reinforce insulation Product in accordance to IEC 60335-1 available File No.: CQC17002175721 RoHS compliant CONTACT DATA COIL Contact arrangement 1A Contact resistance1) Contact material AgNi 5A 250VAC 5A 30VDC Contact rating (Res. load) Max. switching voltage 250VAC/30VDC Max. switching current 5A Max. Voltage VDC *2) 1 x 106OPS 3 2.25 0.15 5.1 45 x (1 10%) 1 x 105OPS ( 5A 250VAC, Resistive load, 5 3.75 0.25 8.5 125 x (1 10%) Room temp., 1.5s on 1.5s off) 6 4.50 0.30 10.2 180 x (1 10%) 9 6.75 0.45 15.3 400 x (1 10%) 12 9.00 0.60 20.4 720 x (1 10%) 18 13.5 0.90 30.6 1600 x (1 10%) 24 18.0 1.20 40.8 2800 x (1 10%) 1250VA/150W CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Dielectric Between coil & contacts 5000VAC 1min strength Between open contacts 1000VAC 1min Coil Resistance Notes: 1) The data shown above are initial values. 2) * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. 8ms max. Operate time (at rated. volt.) Release time (at rated. volt.) 4ms max. Humidity 5% to 85% RH Ambient temperature -40 SAFETY APPROVAL RATINGS UL/CUL to 105 Functional 98m/s Destructive 980m/s2 5A 250VAC 2 10Hz to 55Hz 1.65mm DA Termination PCB Unit weight Approx.4.6g Construction Sensitive type Drop-out Voltage VDC min.1) Notes:1) The data shown above are initial values. Vibration resistance* at 23 Pick-up Voltage VDC max.1) Mechanical endurance Shock resistance* COIL DATA Nominal Voltage VDC Max. switching power Electrical endurance Sensitive: Approx. 200mW Coil power 70m max.(at 1A 6VDC) VDE 5A 250VAC at 105 3A 400VAC at 105 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. Plastic sealed, Flux proofed Notes: 1) *Index is not in relay length direction. 2) The data shown above are initial values. 3) Please find coil temperature curve in the characteristic curves below. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.00 123 ORDERING INFORMATION HF 3 2 FA -T / 0 12 -H S L 1 G (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24VDC Contact arrangement H: 1 Form A Construction 1)2) S: Plastic sealed Nil: Flux proofed Coil power L: Sensitive Termination 1: Type 1 Contact plating 3) G: Gold plated Special code4) XXX: Customer special requirement 2: Type 2 Nil: No gold plated Nil: Standard Notes:1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) For gold plated type, the min. switching current and min. switching voltage is 10mA 5VDC. 4) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT). 5) Two packing methods available: paper box package, tube package,Standard tube packing length is 535mm. Any special requirement needed, please contact us for more details. 6) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 17.6 Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 15.24 10.1 2x 1 2.54 2x 1.3 1 Form A & Type 1 0.96 1.4 2x0.3x0.8 2xØ0.5 2x 1.3 10.1 17.6 2x 1 12.7 2.54 1 Form A & Type 2 2x0.3x0.8 1.4 0.96 2xØ0.5 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 3) The width of the gridding is 2.54mm. 124 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER TEMPERATURE RISE ENDURANCE CURVE 60 5 H type 50 100 HL type 2 50 40 250VAC Resistive Load(NO) 1 30 10 0.5 20 DC Resistive Load 5 AC Resistive Load 0.2 Sensitive 5A(105 ) 10 0.1 10 20 30 100 200 300 400 Contact Voltage (V) 0 1 2 3 4 5 6 7 Contact Current (A) 0 80 90 100 110 120 130 Percentage of Nominal Coil Voltage Test conditions: Flux proofed, Room temp., 1.5s on 1.5s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 125