HF32FV-G/12-HSF(257)

HF32FV-G/HF32FV-T SUBMINIATURE INTERMEDIATE POWER RELAY Features ● 10A switching capability ● Dielectric strength 4kV (between coil and contacts) ● TV-5 products are available File No.:E134517 V D E ● Relow soldering version available ● Halogen-free products are available ● Product in accordance to IEC60335-1 available File No.:40012204 ● Meet reinforce insulation ● UL insulation system: Class F File No.:CQC14002120720 RoHS compliant COIL CONTACT DATA Contact arrangement 1A Contact resistance1) 100m max.(at 1A 6VDC) 2) AgNi ,AgSnO2, AgCdO2) Contact material Contact rating (Res. load) Standard: Approx. 450mW; Sensitive: Approx. 200mW Coil power Sensitive 3) 10A 250VAC Standard Max. switching voltager 277VAC Max. switching current 10A Max. switching power 2770VA Mechanical endurance 1 x 107OPS 1 x 105OPS (10A 250VAC Resistive load, at room temp., 1s on 9s off) Standard 5 x 104OPS (10A 250VAC Resistive load, at 85 , 1s on 9s off) no suffix 590 5 1 x 10 OPS (8A 250VAC Resistive load, Electrical at room temp., 1s on 9s off) endurance 5 x 104OPS (8A 250VAC Resistive load, at 85 , 1s on 9s off) 3) Sensitive 5 x 104OPS (10A 250VAC Resistive load, at room temp., 1s on 9s off) suffix 590 3 x 104OPS (10A 250VAC Resistive load, at 85 , 1s on 9s off) Notes:1) The data shown above are initial values. 2) Only applicable to HF32FV-G no suffix 590. 3) Only applicable to HF32FV-G. COIL DATA Standard Type Pick-up Nominal Voltage Voltage VDC VDC max. 1) at 23 Drop-out Voltage VDC min. 1) Max. Voltage VDC * 2) Coil Resistance 3 2.25 0.15 3.9 20 x (1 10%) 5 3.75 0.25 6.5 55 x (1 10%) 6 4.50 0.30 7.8 80 x (1 10%) 9 6.75 0.45 11.7 180 x (1 10%) 12 9.00 0.60 15.6 320 x (1 10%) 18 13.5 0.90 23.4 720 x (1 10%) 24 18.0 1.20 31.2 1280 x (1 10%) 48 36.0 2.40 62.4 5120 x (1 10%) Max. Voltage VDC * 2) Coil Resistance CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Dielectric Between coil & contacts strength Between open contacts 4000VAC 1min Surge withstand voltage 6kV(1.2 / 50µs) 1000VAC 1min 8ms max. Operate time (at rated. volt.) Sensitive Type Pick-up Drop-out Nominal Voltage Voltage Voltage VDC VDC VDC max. 1) min. 1) 3 2.25 0.15 4.5 45 x (1 10%) 3.75 0.25 7.5 125 x (1 10%) 5ms max. 5 Shock * 2) 294m/s2 6 4.50 0.30 9.0 180 x (1 10%) resistance 980m/s 10Hz to 55Hz 1.5mm DA 9 6.75 0.45 13.5 400 x (1 10%) 12 9.00 0.60 18.0 720 x (1 10%) 18 13.5 0.90 27.0 1600 x (1 10%) 24 18.0 1.20 36.0 2800 x (1 10%) 48 36.0 2.40 72.0 11520 x (1 10%) Release time (at rated. volt.) Functional Destructive Vibration resistance * 2) Functional 2 Humidity 5% to 85% RH Ambient oprating temperature -40 Termination to 105 PCB Approx. 6g Unit weight Construction Plastic sealed, Flux proofed Notes: 1) The data shown above are initial values； 2) HF32FV-T only provides Flux proofed； 3) For working environment temperature ＞ 85 ,please contact with Hongfa. Notes: 1) The data shown above are initial values. 2)* Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.01 137 SAFETY APPROVAL RATINGS 10A 277VAC /250VAC General use 85 10A 277VAC/250VAC Resistive Load 40 10A 277VAC/250VAC Resistive Load 105 10A 277VAC/250VAC Resistive Load(Sensitive) 40 10A 277VAC/250VAC Resistive Load(Sensitive) 85 8A 277VAC/250VAC General use(Sensitive) 85 TV-5 120VAC (suffix 590) 40 3A 120VAC electronic ballast (Sensitive suffix 590) 85 10A 277VAC/250VAC General use 85 10A 277VAC/250VAC Resistive Load 105 10A 30VDC Resistive Load 85 10A 277VAC/250VAC Resistive Load 40 8A 277VAC/250VAC General use(Sensitive) 85 10A 277VAC/250VAC Resistive Load 40 8A 277VAC/250VAC Resistive Load(Sensitive) 40 AgSnO2 HF32FV-G AgCdO UL/CUL AgNi HF32FV-T 10A 277VAC/250VAC General use 105 10A 277VAC/250VAC Resistive Load 105 1/3HP 250VAC Motor Load 105 10A 277VAC/250VAC Resistive Load 85 10A 277VAC/250VAC Resistive Load(Sensitive) 85 8A 277VAC/250VAC Resistive Load(Sensitive) 85 AgSnO2 AgSnO2 HF32FV-G AgCdO 10A 277VAC/250VAC Resistive Load 85 10A 277VAC/250VAC Resistive Load 85 8A 277VAC/250VAC Resistive Load(Sensitive) 85 10A 277VAC/250VAC Resistive Load 105 5A 250VAC COSΦ 0.6 105 10A 277VAC/250VAC Resistive Load 85 8A 277VAC/250VAC Resistive Load(Sensitive) 85 10A 277VAC/250VAC Resistive Load(Sensitive) 85 10A 277VAC/250VAC Resistive Load 105 10A 277VAC/250VAC Resistive Load(Sensitive) 105 10A 277VAC/250VAC Resistive Load 85 AgNi VDE HF32FV-T AgSnO2 AgSnO2 HF32FV-G AgCdO CQC 10A 277VAC/250VAC Resistive Load 85 8A 277VAC/250VAC Resistive Load(Sensitive) 85 AgNi 10A 277VAC/250VAC Resistive Load 105 AgSnO2 HF32FV-T Notes: 1) Opening the vent hole under contact material AgSnO2 testing. 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION HF32FV-G/ Type Coil voltage 12 -H S L T F (XXX) HF32FV-G HF32FV-T 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement H: 1 Form A Construction 1) 2) S: Plastic sealed3) Coil power L: Sensitive3) Nil: Standard Contact material T: AgSnO2 3: AgNi4) Insulation standard Special code5) Nil: Flux proofed Nil: AgCdO4) F: Class F XXX: Customer special requirement Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) Only applicable to HF32FV-G. 4) Only applicable to HF32FV-G with no suffix 590. 5) The customer special requirement express as special code after evaluating by Hongfa. e.g. (335) stands for product in accordance to IEC 60335-1 (GWT); suffix 590 for product in accordance to TV loading. For standard type is TV-5, for sentitive type is TV-3. 6) Two packing methods available: paper box package, tube package,Standard tube packing length is 553mm. Any special requirement needed, please contact us for more details. 7) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. 138 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 4.1 10.2 18.4 12.7 4xØ1.3 (Bottom view) (1) 2x□0.45 0.2 0.3 2.54 0.2 Remark:1) the pin size of HF32FV-G sensitive with suffix 590 is 0.4mm. 2) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual product. 3) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 4) The tolerance without indicating for PCB layout is always ±0.1mm. 5) The width of the gridding is 2.54mm. CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 50 50 70 A 60 D A B 50 10 10 5 B 4 C 40 C AC Restitive load 30 D 3 2 20 DC Restitive load 10 100 200 300 400 0 1 2 3 4 5 6 7 8 9 10 Contact Current(A) Contact Voltage (V) 0 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Remark: 1. Carve A: HF32FV-G standard Carve B: HF32FV-G sensitive(no suffix 590) Carve C: HF32FV-T sensitive(suffix 590) Testing conditions: 10A at 85 . Mounting distance: 10mm Carve D: HF32FV-T standard 2. Testing conditions: HF32FV-G Standard: flux proofed, resistive load, 10A/250VAC, at room temp. 1s on 9s off. HF32FV-G Sensitive(no suffix 590): flux proofed, resistive load, 10A/250VAC, at room temp. 1s on 9s off. HF32FV-G Sensitive(suffix 590): resistive load, 10A/250VAC, at 85 . 1s on 9s off. HF32FV-T Standard: flux proofed, resistive load, 10A/250VAC, 105 . 1s on 9s off. Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 139