HF32FV-G/5-HSLTF(257)

H F3 2 FV SUBMINIATURE INTERMEDIATE POWER RELAY Features ● ● ● ● ● ● ● ● File No.:E134517 V D E File No.:40012204 5A switching capability Dielectric strength 4kV (between coil and contacts) 1 Form A configurations Standard PCB layout Plastic sealed and flux proofed types available UL insulation system: Class F Product in accordance to IEC 60335-1 available Meet reinforce insulation ● Relow soldering version available ● Halogen-free products are available File No.:CQC14002120720 COIL CONTACT DATA 1A Contact arrangement Contact resistance 1) 100m Contact material Contact rating (Res. load) max.(at 1A 6VDC) Sensitive 3A 250VAC 3A 30VDC 277VAC / 30VDC 5A Max. switching current 3A 1385VA / 150W 831VA / 90W 1 x 107OPS 1 x 105OPS (5A 250VAC Resistive load, at room temp., 1s on 9s off) Standard 5 x 104OPS (5A 250VAC Resistive load, at 85 , 1s on 9s off) Electrical 1 x 105OPS (3A 250VAC Resistive load, endurance at room temp., 1s on 9s off) Sensitive 5 x 104OPS (3A 250VAC Resistive load, at 85 , 1s on 9s off) Mechanical endurance Notes: 1) The data shown above are initial values. CHARACTERISTICS Insulation resistance Dielectric Between coil & contacts strength Between open contacts Surge withstand voltage 1000M (at 500VDC) 1000VAC 1min 6kV(1.2 / 50µs) 8ms max. Release time (at rated. volt.) 5ms max. Shock * Functional resistance Destructive Vibration resistance * Functional COIL DATA Standard Type Pick-up Nominal Voltage Voltage VDC VDC max.1) at 23 Drop-out Voltage VDC min. 1) Max. Voltage VDC* 2) Coil Resistance 3 2.25 0.15 3.9 20 x (1 10%) 5 3.75 0.25 6.5 55 x (1 10%) 6 4.50 0.30 7.8 80 x (1 10%) 9 6.75 0.45 11.7 180 x (1 10%) 12 9.00 0.60 15.6 320 x (1 10%) 18 13.5 0.90 23.4 720 x (1 10%) 24 18.0 1.20 31.2 1280 x (1 10%) 48 36.0 2.40 62.4 5120 x (1 10%) Max. Voltage VDC *2) Coil Resistance 4000VAC 1min Operate time (at rated. volt.) 294m/s2 980m/s2 10Hz to 55Hz 1.5mm DA Humidity 5% to 85% RH Ambient oprating temperature Termination -40 Unit weight Construction Standard: Approx. 450mW; Sensitive: Approx. 200mW Coil power AgSnO2, AgCdO, AgNi Standard 5A 250VAC 5A 30VDC Max. switching voltager Max. switching power RoHS compliant to 105 PCB Approx. 6g Plastic sealed, Flux proofed Notes:1) The data shown above are initial values. 2) For working environment temperature ＞ 85 ,please contact with Hongfa. Sensitive Type Nominal Voltage VDC Pick-up Drop-out Voltage Voltage VDC VDC max.1) min. 1) 3 2.25 0.15 4.5 45 x (1 10%) 5 3.75 0.25 7.5 125 x (1 10%) 6 4.50 0.30 9.0 180 x (1 10%) 9 6.75 0.45 13.5 400 x (1 10%) 12 9.00 0.60 18.0 720 x (1 10%) 18 13.5 0.90 27.0 1600 x (1 10%) 24 18.0 1.20 36.0 2800 x (1 10%) 48 36.0 2.40 72.0 11520 x (1 10%) Notes: 1) The data shown above are initial values. 2)* Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.01 129 SAFETY APPROVAL RATINGS AgSnO2 UL/CUL AgCdO AgNi AgSnO2 VDE AgCdO CQC 5A 277VAC /250VAC General Use at 40 5A 277VAC/250VAC General Use at 85 5A 30VDC General Use at 85 300W 120VAC Tunsten at 40 1/4HP 250VAC at 85 3A 277VAC/250VAC General Use (Sensitive) at 85 5A 277VAC/250VAC Resistive at 105 3A 30VDC General Use (Sensitive) at 85 3A 277VAC/250VAC General Use (Sensitive) at 105 TV-3 120VAC at 40 5A 277VAC/250VAC General Use at 85 5A 30VDC Resistive at 85 5A 277VAC/250VAC General Use at 85 5A 30VDC Resistive at 85 3A 30VDC Resistive (Sensitive) at 85 3A 277VAC/250VAC General Use (Sensitive) at 85 5A 277VAC/250VAC General Use at 105 3A 277VAC/250VAC General Use (Sensitive) at 105 250VAC 4(2) Inductive load at 85 5A 30VDC Resistive at 85 5A 277VAC/250VAC Resistive at 85 3A 277VAC/250VAC Resistive at 85 3A 30VDC Resistive (Sensitive) at 85 5A 277VAC/250VAC Resistive at 105 3A 277VAC/250VAC Resistive(Sensitive) at 105 5A 277VAC/250VAC Resistive at 85 5A 30VDC Resistive at 85 AgNi 5A 277VAC/250VAC Resistive at 85 3A 277VAC/250VAC Resistive (Sensitive) at 85 5A 277VAC/250VAC Resistive at 105 3A 277VAC/250VAC Resistive (Sensitive) at 105 AgSnO2 5A 277VAC/250VAC Resistive at 85 5A 30VDC Resistive at 85 3A 277VAC/250VAC Resistive (Sensitive) at 85 5A 277VAC/250VAC Resistive at 105 3A 277VAC/250VAC Resistive (Sensitive) at 105 AgCdO AgNi 5A 277VAC/250VAC Resistive at 85 5A 30VDC Resistive at 85 5A 277VAC/250VAC Resistive at 85 5A 30VDC Resistive at 85 3A 277VAC/250VAC Resistive (Sensitive) at 85 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. 130 ORDERING INFORMATION HF 3 2F V / 1 2 -H S L T F (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Contact arrangement H: 1 Form A Construction 1) 2) S: Plastic sealed 3) Nil: Flux proofed Coil power L: Sensitive Nil: Standard Contact material T: AgSnO2 Nil: AgCdO Insulation standard F: Class F Customer special code4) 3: AgNi XXX: Customer special requirement Nil: Standard Notes:1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) Sensitive loading: 3A. 4) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT); e.g.(590) stands for product in accordance to TV-3 loading,only for standard type. 5) Two packing methods available: paper box package, tube package,Standard tube packing length is 553mm. Any special requirement needed, please contact us for more details. 6) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Wiring Diagram Unit: mm PCB Layout (Bottom view) (Bottom view) 4.1 10.2 18.4 4xØ1.3 12.7 0.3 2.54 (Bottom view) 2x□0.45 2-0.2x0.8 Remark: 1) *The additional tin top is max. 1mm. 2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 3) The tolerance without indicating for PCB layout is always ±0.1mm. 4) The width of the gridding is 2.54mm. 131 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER COIL TEMPERATURE RISE ENDURANCE CURVE 50 50 70 60 A Standard 50 Sensitive 10 10 AC Restitive load 5 4 40 B 30 3 20 2 DC Restitive load 10 100 200 300 400 Contact Voltage (V) 0 1 2 3 4 5 6 Contact Current(A) Remark: 1. Carve A: standard Carve B: sensitive 2. Testing conditions: Standard: flux proofed, resistive load, 5A 250VAC, at room temp. 1s on 9s off. Sensitive: flux proofed, resistive load, 3A 250VAC, at room temp. 1s on 9s off. 0 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Testing conditions: Standard: 5A at 85 . Sensitive: 3A at 85 Mounting distance: 5mm Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 131