HF3FA/024-ZTF(257)

HF3 FA/ HF 3FA-T SUBMINIATURE HIGH POWER RELAY Features File No.: E134517 ● ● ● ● ● ● V D E File No.: 40023708 15A 125VAC;10A 250VAC switching capability TV-8 loading Flammability class according to UL94, V-0 Product in accordance to IEC 60335-1 available Subminiature, standard PCB layout Plastic sealed and Flux proofed types available ● UL insulation system: Class F File No.:CQC12002076529 RoHS compliant CONTACT DATA COIL 1C 1A Contact arrangement Contact resistance1) NO Coil power NC 100m max.(at 1A 6VDC) Contact material 10A 277VAC Contact rating (Res. load) 10A 28VDC 10A 28VDC2) Max. switching voltage Max. switching current 277VAC/28VDC 15A Max. switching power 10A Electrical endurance3) 3 5A 5 3.75 0.5 6.5 70 x (1 10%) 6 4.50 0.6 7.8 100 x (1 10%) 9 6.75 0.9 11.7 225 x (1 10%) 12 9.00 1.2 15.6 400 x (1 10%) 15 11.25 1.5 19.5 625 x (1 10%) 18 13.5 1.8 23.4 900 x (1 10%) 24 18.0 2.4 31.2 1600 x (1 10%) 48 36.0 4.8 62.4 6400 x (1 10%) 1 x 107OPS H type:1 x 105OPS (10A 250VAC Resistive load, Room temp., 1s on 9s off) Z type:5 x 104OPS (NO: 5A/NC: 5A 250VAC, Resistive load, Room temp., 3s on 3s off) Notes: 1) The data shown above are initial values. 2) Applicable when NC is not energized with load. 3) For plastic sealed type, the venting-hole should be opened in electrical endurance test. CHARACTERISTICS Insulation resistance Dielectric strength 100M (at 500VDC) Between coil & contacts 2500VAC 1min Between open contacts 750VAC 1min Operate time (at rated. volt.) 10ms max. Release time (at rated. volt.) 5ms max. Shock resistance at 23 250VAC 5A 250VAC 2770VA /280W Mechanical endurance COIL DATA Pick-up Voltage VDC max.1) 2.25 AgSnO2;AgNi;AgCdO 10A 277VAC2) Approx. 360mW Functional 98m/s2 Destructive 980m/s2 Nominal Voltage VDC Drop-out Voltage VDC min.1) 0.3 Max. Voltage VDC *2) 3.9 25 x (1 10%) Notes: 1) The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS HF3FA 1 Form A 1 Form C UL/CUL HF3FA-T 1 Form A 10Hz to 55Hz 1.5mm DA 1 Form C Humidity 5% to 85% RH 1 Form A Ambient oprating temperature -40 Vibration resistance PCB Unit weight Approx. 7.2 g Plastic sealed, Flux proofed Construction HF3FA to 105 Termination Notes: 1) The data shown above are initial values. 2) For working environment temperature of 85 ,please contact with Hongfa. 1 Form C VDE HF3FA-T 1 Form A 1 Form C 10A 250VAC 85 6A 250VAC 105 15A 125VAC TV-8 120VAC (stuffix 590) TV-5 120VAC NO/NC: 5A/5A 277VAC 85 NO: TV-5 120VAC NO: TV-8 120VAC (stuffix 590) 10A 250VAC 105 12A 250VAC 105 TV-5 120VAC NC: 6A 250VAC 105 6A 250VAC 105 10A 250VAC 85 NO: 10A 250VAC 85 NO: 6A 250VAC 105 NO/NC: 5A/5A 250VAC 85 10A 250VAC 105 NO: 10A 250VAC 105 NC: 6A 250VAC 105 Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. 3) For sealed type, the vent-hole cover should be excised. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 162 Coil Resistance 2020 Rev. 1.11 ORDERING INFORMATION HF 3 FA / 01 2 -H S T F (XXX) HF3FA:85 Type HF3FA-T:105 Coil voltage 3,5,6,9,12,15,18,24,48VDC Contact arrangement H: 1 Form A Construction 1) S: Plastic sealed Contact material T: AgSnO2 Insulation system F: Class F Special code3) XXX: Customer special requirement Z: 1 Form C Nil: Flux proofed 3: AgNi Nil: AgCdO Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. e.g.(335) stands for product in accordance to IEC 60335-1 (GWT);e.g.(stuffix 590) for product in accordance to TV-8 loading. 4) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. 5) Two packing methods available: paper box package, tube package,Standard tube packing length is 420mm. Any special requirement needed, please contact us for more details. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions PCB Layout Wiring Diagram (Bottom view) (Bottom view) 3x 1.3 15.2 19 Unit: mm vent-hole 1.5 1 Form A 2x□0.5 0.3 1.6 0.4x1 2 12.2 15.2 19 3.4±0.3 1.2 4x 1.3 vent-hole 1.5 1 Form C 2x□0.5 0.3 1.6 2 2-0.4x1 12.2 3.4±0.3 1.2 Remark:1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual product. 2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 3) The tolerance without indicating for PCB layout is always ±0.1mm. 163 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 80 50 AC(NO) 70 100 15 60 50 10 50 NO CO 40 10 30 5 2 20 DC(NO) 10 100 400 Contact Voltage (V) 0 5 10 Contact Current (A) Test conditions: NO: Resistive load, Flux proofed, Room temp., 1s on 9s off CO:Resistive load, Flux proofed, Room temp., 3s on 3s off Notes: For plastic sealed type, the venting-hole should be opened in electrical endurance test. 0 80 90 100 110 120 130 Percentage of Nominal Coil Voltage Test conditions: at 85 , 6A Mounting distance: 10mm Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 164