HF46F/12-H1(257)

HF4 6F SUBMINIATURE INTERMEDIATE POWER RELAY Features ● 5A switching capability ● 10kV impulse withstand voltage (between coil and contacts) ● Meets VDE 0631 reinforce insulation ● Highly efficient magnetic circuit for high sensitivity: 200mW ● Extremely small footprint utilizing PCB area File No.: E134517 V D E File No.: 40025215 File No.: CQC17002168380 RoHS compliant CONTACT DATA COIL Contact arrangement Contact 1A resistance 1) 100m max. (at 1A 6VDC) AgSnO2, AgNi Contact material Contact rating (Res. load) Coil power Approx. 200mW COIL DATA at 23 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) Max. Voltage VDC * 2) 3 2.25 0.18 3.90 45 x (1 10%) 5 x 106OPS 5 3.75 0.25 6.50 125 x (1 10%) 1 x 105OPS (5A 250VAC, Resistive load, AgNi, at 85 C, 1s on 1s off) 5 x 104OPS (5A 250VAC, Resistive load, AgSnO2, at 85 C, 3s on 3s off) 6 4.50 0.30 7.80 180 x (1 10%) 9 6.75 0.45 11.7 405 x (1 10%) 12 9.00 0.60 15.6 720 x (1 10%) 18 13.5 0.90 23.4 1620 x (1 10%) 24 18.0 1.20 31.2 2880 x (1 10%) 3A 250VAC/30VDC 5A 250VAC/30VDC 277VAC / 30VDC Max. switching voltage Max. switching current 5A Max. switching power Coil Resistance 1385VA / 150W Mechanical endurance o Electrical endurance o Notes:1) The data shown above are initial values. CHARACTERISTICS Insulation resistance 1000M (at 500VDC) Dielectric Between coil & contacts strength Between open contacts Surge voltage (between coil & movable contacts) 4000VAC 1min 1000VAC 1min 10kV (1.2 / 50µs) Operate time (at rated. volt.) 10ms max. Release time (at rated. volt.) 10ms max. Shock resistance 1) Vibration resistance 1) Notes:1) The data shown above are initial values. 2) * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. Functional SAFETY APPROVAL RATINGS AgNi 98m/s2 Destructive 980m/s Ambient temperature 10Hz to 55Hz 1.5mm DA -40 UL/CUL AgSnO2 to 85 Termination PCB Unit weight Approx. 3g Construction Plastic sealed Notes: 1) Shock malfunciton: 49m/s2 for the length direction. Vibration: 10Hz to 55Hz 1mm DA for the length direciton. 2) The data shown above are initial values. 3) UL insulation system: Class F, Class B. at 85 C at 85 C at 85 C at 85 C 5A 125VAC/250VAC 5A 277VAC/30VDC 3A 125VAC/250VAC 3A 277VAC/30VDC at 85 C at 85 C at 85 C at 85 C B300 R300 o o o o 2 5% to 85% RH Humidity 5A 125VAC/250VAC 5A 277VAC/30VDC 3A 125VAC/250VAC 3A 277VAC/30VDC VDE o o o o AgNi 5A 250VAC/30VDC at 85 C AgSnO2 5A 250VAC/30VDC at 85 C o o Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2020 Rev. 1.00 109 ORDERING INFORMATION HF 4 6 F / 12 -H S 1 T G F (XXX) Type Coil voltage 3, 5, 6, 9, 12, 18, 24VDC Contact arrangement H: 1 Form A Construction 1)2) S: Plastic sealed Termination 1: type 1 Contact material 3) T: AgSnO2 Nil: AgNi Contact plating G: Gold plated Nil: No gold plated Insulation standard F: Class F Nil: Class B Special code5) XXX: Customer special requirement Nil: Standard Notes: 1) We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) For the loads which can bring high inrush current when relay contacts connect istantly (eg. lamp, capacitive load), AgSnO2 contact material is recommended on priority. 4) For gold plated type, the min. switching current and min. switching voltage is 10mA 5VDC. 5) The customer special requirement express as special code after evaluating by Hongfa. 6) Two packing methods available: paper box package, plastic tray package,tube package.Standard tube packing length is 560mm. Any special requirement needed, please contact us for more details. 7) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions HF46F/□ □-HS1□ □ (XXX) 7.0 20.5 0.3 (Bottom view) 0.3+- 00..11 5 Ø0.4 +-00..025 (1.05) 0.8 0.3+- 00..11 5 PCB Layout Wiring Diagram (Bottom view) (Bottom view) 11.5 7 4xØ1.1 Remark:1) The pin dimension of the product outline drawing is the size before tinning (it will become larger after tinning), and the mounting hole size is the recommended design size of the PCB board hole. The specific PCB board hole design size can be mapped and adjusted according to the actual product. 2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 3) The tolerance without indicating for PCB layout is always ±0.1mm. 110 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 100 8 60 250VAC, Resistive load 50 7 50 20 6 AgNi AC Resistive load 40 15 5A 5 10 1 3A 30 8 AgSnO2 20 5 DC Resistive load 0.6 10 3 0.2 0 10 20 30 100 200 300 400 Contact Voltage (V) 0 1 2 3 4 5 6 Contact Current (A) 0 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Test conditions: o AgNi, at 85 C, 1s on 1s off, o AgSnO2, at 85 C, 3s on 3s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 111