HF7520/012-HS(257)

HF7 52 0 SUBMINIATURE POWER RELAY Features High rating: 16A, TV-5 load capability High sensitive: 200mW Low height, flat construction PCB & QC layouts available Plastic sealed and flux proofed types (with vent-hole cover) available ● UL insulation system:Class F ● Product in accordance to EN 60335-1 available RoHS compliant ● ● ● ● ● ● File No.: E133481 File No.: R50351269 File No.: CQC09002034524 CONTACT DATA CHARACTERISTICS Arrangement 1A 1C Contact resistance1) 100m max.(at 1A 6VDC) Contact material See ordering info. Standard type: NO: Contact rating 10A 125/250VAC (Res. load) NC: Max.switching voltage Max.switching current TV-5 10A 30VDC 10A 125/250VAC High capacity type: TV-5 6A 125/250VAC 16A 30VDC 16A 125/250VAC 8A 250VAC(COSØ=0.4) 250VAC 250VAC/30VDC NO:10A 16A NC: 6A Max.switching power NO: 2500VA NC: 1500VA Mechanical endurance Electrical endurance 4000VA/480W 7 1 x 10 COIL 2500VAC 1 min Dielectric Between coil & contacts strength Between open contacts 1000VAC 1 min Operate time (at rated.volt) 15ms max. Release time (at rated.volt) 5ms max. Shock resistance 98m/s2 Functional Destructive Vibration resistance 980m/s2 10Hz to 55Hz 1.5mm DA Humidity 5% to 85% RH Ambient oprating temperature -40 C to 105 C o o 1C: PCB Termination 1A: PCB & QC PCB: Approx.9g Unit weight QC: Approx.10.5g Plastic sealed, Flux proofed Construction Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 1 Form A: Approx. 200mW; 1 Form C: Approx. 400mW SAFETY APPROVAL RATINGS TV-5 125VAC 16A 125VAC at 85 C 10A 250VAC at 85 C 16A 30VDC at 85 C 0.3A 110VDC at 85 C 13A 125VAC at 105 C 10A 250VAC at 105 C o o 1 Form A UL/CUL o o o o TÜV 1 Form C NO: 10A 250VAC NC: 6A 250VAC 1 Form A 16A 250VAC 10A 30VDC 8A 250VAC (COSØ=0.4) Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 198 1000M (at 500VDC) OPS HP type: 5 x 104OPS (16A 250VAC, Resistive load, Room temp., 1s on 9s off) H type: 5 x 104OPS (10A 250VAC, Resistive load, Room temp., 1s on 9s off) Z type: 5 x 104OPS (NO, 10A 250VAC, Resistive load, Room temp., 1s on 9s off) Z type: 5 x 104OPS (NC, 6A 250VAC, Resistive load, Room temp., 1s on 9s off) Notes:1) The data shown above are initial values. 2) For plastic sealed type, the venting-hole should be opened in electrical endurance test. Coil power Insulation resistance 2020 Rev. 1.00 COIL DATA at 23 1 Form C type 1 Form A type Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) Max. Voltage VDC * 2) 5 4.0 0.5 6.5 6 4.8 0.6 9 7.2 12 Nominal Voltage VDC Pick-up Voltage VDC max.1) Drop-out Voltage VDC min.1) 62.5 x (1 10%) 5 4.0 0.5 6.5 125 x (1 10%) 7.8 90 x (1 10%) 6 4.8 0.6 7.8 180 x (1 10%) 0.9 11.7 202.5 x (1 10%) 9 7.2 0.9 11.7 405 x (1 10%) 9.6 1.2 15.6 360 x (1 10%) 12 9.6 1.2 15.6 720 x (1 10%) 18 14.4 1.8 23.4 810 x (1 10%) 18 14.4 1.8 23.4 1620 x (1 10%) 24 19.2 2.4 31.2 1440 x (1 10%) 24 19.2 2.4 31.2 2880 x (1 10%) 48 38.4 4.8 62.4 5760 x (1 10%) 48 38.4 4.8 62.4 11520 x (1 10%) Coil Resistance Max. Voltage VDC * 2) Coil Resistance Notes:1) The data shown above are initial values. 2)*Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. ORDERING INFORMATION HF 7 52 0 / 0 12 -H S T P Q (XXX) Type Coil voltage 5, 6, 9,12, 18, 24, 48VDC Contact arrangement Construction 1) H: 1 Form A S: Plastic sealed Z: 1 Form C Nil: Flux proofed Contact material T: AgSnO2 Nil: AgCdO (Only for 1 Form A) AgNi (Only for 1 Form C) Contact capacity P: High Capacity type (Only for 1 Form A) Nil: Standard type Terminal type Q: QC (Only for 1 Form A and high capacity type) Special code4) XXX: Customer special requirement Nil: PCB Nil: Standard Notes: 1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. o 3) When the ambient temperature reaches 105 C degree or more, please select flux proofed and high capacity type. Besides, please indicate the exact ambient temperature when ordering. 4) The customer special requirement express as special code after evaluating by Hongfa. 199 OUTLINE DIMENSIONS , WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form A (PCB) Wiring Diagram Outline Dimensions (Bottom View) 0.4 1.0 1.0 0.5 0.4 0.5 PCB Layout (Bottom view) 2.54 22±0.5 1 2 The vent-hole cover com 3 (Top view) 17.78 NC 5 NO 4 (Bottom View) 2.2 2xø1.3 10.16 1 Form A (Wide terminal) Wiring Diagram Outline Dimensions 2.0 1.0 0.5 0.4 0.5 PCB Layout (Bottom view) 22±0.5 17.78 The vent-hole cover com 3 (Top view) 200 1 2 NO 4 ø1.3 NC 5 (Bottom View) 2.2 10.16 2.4 OUTLINE DIMENSIONS , WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm 1 Form A (QC) Outline Dimensions Wiring Diagram 6.3 o 20 C 3.2 0.5 0.5 ø1.3 0.5 2X1.2 0.5 0.5 0.5 4.75 20.5 ±0.3 (Bottom View) (Top View) PCB Layout (Bottom view) 2.54 3 4 2 1 1.8 The vent-hole cover 1.8 22.5 ±0.5 5 16.1 (Bottom View) (Top view) 1 Form C (PCB) Wiring Diagram Outline Dimensions 1.0 1.0 0.5 1.0 (Bottom View) 0.4 0.5 PCB Layout (Bottom view) 22 ±0.5 The vent-hole cover 2.54 1 2 com 3 (Top view) 17.78 NO 4 NC 5 (Bottom View) 2.2 10.16 7.62 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 201 CHARACTERISTIC CURVES MAXIMUM SWITCHING POWER ENDURANCE CURVE COIL TEMPERATURE RISE 100 100 100 60 1Z, Standard type (at 25 ) 50 AC Resistive Load 1H, Standard type (at 25 ) 16 A 10 40 1H, High Capacity type (at 25 10 DC Resistive Load 5 1 ) 30 B 20 10 0 0 10 30 100 200 250 300 400 500 Contact Voltage (V) 0 2 4 6 8 10 12 14 16 18 Contact Current (A) 0 80 100 120 140 160 Percentage Of Nominal Coil Voltage Notes: (1) Curve A: HP type Curve B: H type (2) Test conditions: Curve A: 16A 250VAC, Resistive load, Room temp., 1s on 9s off Curve B: 10A 250VAC, Resistive load, Room temp., 1s on 9s off Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 202