HF8-1CH-24DSE(257)

HF8 SUBMINIATURE INTERMEDIATE POWER RELAY Features ● 4kV impulse withstand voltage (between coil and contacts) ● 1 Form A and 1 Form C configurations File No.:E134517 ● Subminiature, high sensitive, PCB layout ● Plastic sealed type for automatic wave soldering V D E File No.:40025189 RoHS compliant CONTACT DATA COIL Contact arrangement 1A, 1C Contact resistance1) 100m max.(at 1A 24VDC) Contact material HF8: 6A 300VAC/28VDC HF8A: 6A 277VAC/30VDC Max. switching voltage 300VAC / 30VDC Max. switching current 6A Max. switching power 1800VA / 300W 1 x 107 OPS Plastic sealed:1 x 104OPS Flux proofed, Standard type:1 x 105 OPS Electrical endurance2) Flux proofed, Sensitive type:5 x 104 OPS (NO, 6A 300VAC, Resistive load, Room temp., 1s on 9s off) Mechanical endurance Notes: 1) The data shown above are initial values. 2) For plastic sealed type, the venting-hole should be excised in electrical endurance test. CHARACTERISTICS Insulation resistance 100M (at 500VDC) Dielectric Between coil & contacts 2000VAC 1min Between open contacts 750VAC 1min Operate time (at rated. volt.) 6ms max. Release time (at rated. volt.) Humidity 3ms max. 5% to 85% RH Operation ambient temperature Shock resistance Vibration resistance Termination Unit weight Construction (48VDC: Approx. 600mW) Sensitive: Approx. 330mW AgNi Contact rating (Res. load) strength Standard: Approx. 450mW Coil power -55 to 90 COIL DATA at 23 Standard type Nominal Pick-up Drop-out Voltage Voltage Voltage VDC VDC VDC max.2) min.2) 2.25 0.15 3 Max. Voltage VDC *3) Coil Resistance 3.90 20 x (1 10%) 5 3.75 0.25 6.50 56 x (1 10%) 6 4.50 0.30 7.80 80 x (1 10%) 9 6.75 0.45 11.7 180 x (1 10%) 12 9.00 0.60 15.6 320 x (1 10%) 18 13.5 0.90 23.4 720 x (1 10%) 24 18.0 1.20 31.2 1280 x (1 10%) 48 36.0 2.40 62.4 3800 x (1 10%) Sensitive type Nominal Voltage VDC Pick-up Voltage VDC max.2) Drop-out Voltage VDC min.2) Max. Voltage VDC *3) 3 2.25 0.15 3.90 28 x (1 10%) 5 3.75 0.25 6.50 80 x (1 10%) 6 4.50 0.30 7.80 110 x (1 10%) Coil Resistance Functional 98m/s2 Destructive 980m/s2 9 6.75 0.45 11.7 250 x (1 10%) 10Hz to 55Hz 1.5mm DA 12 9.00 0.60 15.6 440 x (1 10%) PCB 18 13.5 0.90 23.4 1000 x (1 10%) Approx. 11g 24 18.0 1.20 31.2 1780 x (1 10%) 48 36.0 2.40 62.4 7120 x (1 10%) Plastic sealed, Flux proofed Notes: 1) The data shown above are initial values. 2) Please find coil temperature curve in the characteristic curves below. 3) UL insulation system: Class F, Class B, Class A. Notes: 1) When requiring pick-up voltage < 75% of nominal voltage, special order allowed. 2) The data shown above are initial values. 3) *Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.01 159 SAFETY APPROVAL RATINGS 6A 28VDC 6A 300VAC Medium Duty HF8-1CH/1AH 2A 28VDC 2A 300VAC 3A 120VAC General Duty UL/CUL HF8-1C/1A 6A 30VDC(NO/NC) HF8A VDE 6A 277VAC(NO/NC) 2.5A 250VAC COSØ=0.4 2.5A 250VAC COSØ=0.5 5A 250VAC COSØ=1 6A 250VAC COSØ=1 HF8....A Notes: 1) All values unspecified are at room temperature. 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION HF8 HF8A -1C H -12 D S F E (XXX) HF8: Standard type HF8A: Low cost type Type Contact arrangement: 1A: 1 Form A 1C: 1 Form C Contact capacity T: Heavy duty Duty 10A (6A) H: Medium Nil: General Duty (3A/2A) Coil voltage 3, 5, 6, 9, 12, 18, 24, 48VDC Coil voltage form D: DC Coil power S: Sensitive Construction 1) E: Plastic sealed Insulation standard F: Class F Nil: Class B Special code3) XXX: Customer special requirement Nil: Standard Nil: Flux proofed A: Class A (VDE version, Only for HF8-1AH/1CH) Nil: Standard Notes: 1) Under the ambience with dangerous gas like H2S, SO2 or NO2, plastic sealed type is recommended; Please test the relay in real applications. If the ambience allows, flux proofed type is preferentially recommended. 2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB. 3) The customer special requirement express as special code after evaluating by Hongfa. 4)One packing methods available: tube package,Standard tube packing length is 345mm. Any special requirement needed, please contact us for more details. OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 1 Form A 21.3 0.2x1 0.7x0.4 160 16.2 2x□0.6 Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 4x 1.4 12.7 5.08 1.8 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions Unit: mm Wiring Diagram PCB Layout (Bottom view) (Bottom view) 1 Form C 21.3 16.2 12.7 5.08 1.8 5x 1.4 2x□0.6 0.2x1 2-0.7x0.4 Remark: 1) * The additional tin top is max. 1mm. 2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 3) The tolerance without indicating for PCB layout is always ±0.1mm. 4) The width of the gridding is 2.54mm. CHARACTERISTIC CURVES ENDURANCE CURVE MAXIMUM SWITCHING POWER COIL TEMPERATURE RISE 70 100 100 50 60 Resistive 阻性负载Load 50 6 A 40 10 1 30 5 B 20 10 100 200 300 400 500 Contact Voltage (V) 0 1 2 3 4 5 6 0 7 Contact Current (A) 80 90 100 110 120 130 Percentage Of Nominal Coil Voltage Notes: 1) Curve A: HF8-1CH Standard type Curve B: HF8-1CH Sensitive type 2) Test conditions: NO, 6A 300VAC, Resistive load, Flux proofed, Room temp. 1s on 9s off 3) For plastic sealed type, the venting-hole should be excised in electrical endurance test. Testing conditions: 6A at 90 . Mounting distance: 25mm Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 161