HF92F-240A-2A22F(136)(257)

H F9 2 F MINIATURE INTERMEDIATE POWER RELAY Features ● ● ● ● ● ● File No.:E134517 V D E File No.:40016109 30A switching capability Creepage distance: 8mm 4kV dielectric strength (between coil and contacts) UL insulation system: Class F Plastic sealed and dust protected types available PCB & QC layouts available File No.:CQC09002037814 (DC type) CQC18002202752 (DC type) CQC14002114447 (AC type) CQC18002202751 (AC type) COIL CONTACT DATA Contact arrangement Contact resistance 2A, 2C 1) AgSnO2, AgCdO NO: 30A 250VAC; 30A 277VAC Contact rating (Res. load) NC: 3A 250VAC; 3A 277VAC Max. switching voltage 277VAC Max. switching current 30A Max. switching power Mechanical endurance 8310VA 5 x 106OPS 5 1 x 10 OPS (NO: 30A 277VAC, Resistive load, Room temp., 1s on 9s off) 1 x 105 OPS (NC: 3A 277VAC, Resistive load, Room temp., 1s on 9s off) Notes:1) The data shown above are initial values. CHARACTERISTICS Insulation resistance 1000M (at 500VDC) 4000VAC 1min Between coil & contacts Dielectric strength Between open contacts Between contact poles 1500VAC 1min 2000VAC 1min Surge voltage (between coil & contacts) 10kV (1.2/50µs) Operate time (at rated. volt.) DC type: 25ms max. Release time (at rated. volt.) DC type: 25ms max. AC type:90K max. DC type:70K max. Temperature rise (at rated. volt.) Shock resistance Vibration resistance DC type: Approx. 1.7W; AC type: Approx. 4.0VA Coil power 50m max.(at 1A 24VDC) Contact material Electrical endurance RoHS compliant Functional AC: -40 6 4.5 0.6 9.6 22x (1 10%) 012D 12 9 1.2 19.2 86x (1 10%) 024D 24 18 2.4 38.4 350x (1 10%) 048D 48 36 4.8 76.8 1390x (1 10%) 110D 110 82.5 11 176 7255x (1 10%) AC type (at 50Hz) Nominal Pick-up Drop-out Max. Coil Voltage Voltage Voltage Voltage VAC 2) VAC Code VAC * 1) 1) VAC max. min. 024A5 24 19.2 4.8 26.4 Coil Resistance 45x (1 10%) 120A5 120 96 24 132 1125x (1 10%) 208A5 208 166.4 41.6 229 3278x (1 10%) 220A5 220 176 44 242 3800x (1 10%) 240A5 240 192 48 264 4500x (1 10%) 277A5 277 221.6 55.4 305 5960x (1 10%) 35.7x (1 10%) to 65 96 24 132 830x (1 10%) Coil Resistance to 85 208A6 208 166.4 41.6 229 2600x (1 10%) Termination PCB, QC Unit weight 220A6 220 176 44 242 2870x (1 10%) Approx. 86g Plastic sealed, Flux proofed 240A6 240 192 48 264 3800x (1 10%) 277A6 277 221.6 55.4 305 4700x (1 10%) Construction DC: -40 006D 120 5% to 85% RH Ambient temperature Coil Nominal Pick-up Drop-out Max. Coil Voltage Voltage Voltage Resistance 2) VDC Code Voltage VDC VDC * 1) VDC max.1) min. 5 3.8 0.5 8.0 15.3x (1 10%) 005D 120A6 10Hz to 55Hz 1.65mm DA Humidity at 23 DC type AC type (at 60Hz) Nominal Pick-up Drop-out Max. Coil Voltage Voltage Voltage Voltage VAC VAC 2) Code VAC * 1) 1) VAC max. min. 024A6 24 19.2 4.8 26.4 98m/s2 980m/s2 Destructive COIL DATA Notes: The data shown above are initial values. HONGFA RELAY ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED 2019 Rev. 1.00 371 COIL DATA at 23 AC type (at 50Hz/60Hz) Pick-up Voltage VAC 1) max. Drop-out Voltage VAC 1) min. 50Hz 60Hz 50Hz 60Hz 96 22 24 132 950 x (1 10%) 166.4 40 41.6 229 2841 x (1 10%) 176 192 44 48 264 3800 x (1 10%) 200 221.6 50 55.4 305 5485 x (1 10%) Coil Code Nominal Voltage VAC 120A 120 88 208A 208 160 240A 240 277A 277 Max. Voltage 2) VDC * Coil Resistance Notes:1) The data shown above are initial values. 2) * Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time. SAFETY APPROVAL RATINGS UL/CUL 1) VDE 1) (AgSnO2) NO 30A 277VAC 1HP 120VAC 2.5HP 240VAC 110 LRA/25.3 FLA 240VAC (DC type) NC 3A 277VAC NO 30A 250VAC 20A 250VAC NC 3A 250VAC Notes: 1) UL certified loads are tested at 40℃. VDE certified loads are tested at 85℃ (DC products) or 50℃ (AC products). 2) Only typical loads are listed above. Other load specifications can be available upon request. ORDERING INFORMATION HF 9 2 F -012D -2C 2 2 F (XXX) Type XXX D: DC type(5,6,12,24,48,110VDC) XXX A5: AC type 50Hz(24,120,208,220,240,277VAC) XXX A6: AC type 60Hz(24,120,208,220,240,277VAC) XXX A: AC type 50Hz/60Hz(120,208,240,277VAC) Coil Code Contact arrangement Termination 1) Contact m aterial Construction 2) Special code3) 2A: 2 Form A 1: PCB 2C: 2 Form C 2, 3: QC 1: AgSnO2 S: Plastic sealed 2: AgCdO F: Flux proofed XXX: Customer special requirement Nil: Standard Notes: 1) For QC terminals, no soldering or washing is allowed. For PCB terminals, please refer to us for soldering condition and part specification for necessary washing or surface processing after it is soldered to PCB. 2) We recommend dust protected types for a clean environment (free from contaminations like H2S, SO2, NO2, dust, etc.). We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.). 3) The customer special requirement express as special code after evaluating by Hongfa. 372 OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Unit: mm Outline Dimensions 1 Type (PCB) 0.8 6.35 +0.04 -0.02 4.1 0.2 1.2 52.0 max 0.08 0.07 0 2 6 4 3 8 7 1 7.8 0.13 0.13 7.0 0.5 33.2 68.6 max 2 Type (QC) 59.7 0.2 52 max 0.8 6.35 +0.04 -0.02 0.08 0.8 +0.04 -0.02 6.35 0.08 0 2 6 4 3 8 7 1 11.4 0.5 7.8 7.0 33.2 3 Type (QC) 68.6 max 4.75 0.8 +0.04 -0.02 +0.03 0.5 -0.02 0.08 6.35 59.7 0.08 0.2 52 max 0 11.4 2 6 0.5 4 3 8 7 1 7.8 7.0 33.2 PCB Layout (Bottom view) Wiring Diagram (Bottom view) 1.8 2 Form A 2 Form C 0 7.8 5.15 7.0 2 4 6 8 1 0 2 4 3 6 8 7 1 33.2 Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm. 2) The tolerance without indicating for PCB layout is always ±0.1mm. 373 CHARACTERISTIC CURVES MAX. ALLOWABLE AMBIENT TEMPERATURE 140 DC Coil, 30A Contact current 120 100 DC Coil 0A Contact current 80 60 AC Coil 30A Contact current AC Coil 0A Contact current 40 20 75 85 95 105 115 125 135 145 Percentage Of Nominal Coil Voltage Disclaimer The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s responsibility to determine which product should be used only. © Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved. 374