5082-331G-KG500

Agilent HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment Display Data Sheet Features • Industry standard size • Industry standard pinout 7.62 mm (0.4 inch) character height DIP lead on 2.54 mm • Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow • Excellent appearance Evenly lighted segments gray package gives optimum contrast ± 50° viewing angle • Design flexibility Common anode or common cathode Single digit Left and right hand decimal point or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. • Categorized for luminous intensity Green and yellow categorized for color Applications • Suitable for indoor use • Not recommended for industrial application, i.e., operating temperature requirements exceeding +85˚C or below –25˚C[1] • Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Agilent sales office or an authorized distributor. Description This 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device is available in either common anode Devices HER HDSP-331E HDSP-332E HDSP-333E HDSP-334E HDSP-333G HDSP-334G HDSP-333A HDSP-334A HDSP-333Y HDSP-334Y Green HDSP-331G AlGaAs Red HDSP-331A Yellow HDSP-331Y Description Common Anode, Right Hand and Left Hand Decimal Common Anode, Right Hand and Left Hand Decimal without Pin 4, 5 and 12 Common Cathode, Right Hand Decimal Common Cathode, Right Hand Decimal Package Drawing A A B C Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions Package Drawing A FRONT VIEW TOP END VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) 0.50 (0.020) PIN 1 + 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) HDSP-XXXX YWW XZ COO 2.54 x 6 (0.099) 2– ∅1.1 (0.043) 5.20 (0.205) 0.90 (0.035) LUMINOUS INTENSITY CATEGORY DATE CODE 6.10 (0.240) 1.50 (0.059) SIDE VIEW 10.10 (0.398) F E L.DP 0.30 (0.012) 3.88 (0.153) D A G B C R.DP 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) NOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12. 3 Package Dimensions Package Drawing B FRONT VIEW TOP END VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) 0.50 (0.020) PIN 1 + 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) HDSP-XXXX YWW XZ COO 2.54 x 6 (0.099) 2– ∅1.1 (0.043) 5.20 (0.205) 0.90 (0.035) LUMINOUS INTENSITY CATEGORY DATE CODE 6.10 (0.240) 1.50 (0.059) SIDE VIEW 10.10 (0.398) F E D 0.30 (0.012) 3.88 (0.153) A G B C R.DP 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) 4 Package Dimensions Package Drawing C FRONT VIEW TOP END VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) 0.50 (0.020) PIN 1 + 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) HDSP-XXXX YWW XZ COO 2.54 x 6 (0.099) 2– ∅1.1 (0.043) 5.20 (0.205) 0.90 (0.035) LUMINOUS INTENSITY CATEGORY DATE CODE 6.10 (0.240) 1.50 (0.059) SIDE VIEW 10.10 (0.398) F E D 0.30 (0.012) 3.88 (0.153) A G B C R.DP 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) 5 Internal Circuit Diagram Common Anode HDSP-331E/331G/331Y/331A/332E 3.14 COM PIN N0. 1 2 3 6 7 8 L.DP 6 A 1 B 13 C 10 D 8 E 7 F 2 G R.DP 11 9 9 10 11 13 14 CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE L.DP CATHODE E CATHODE D CATHODE R.DP CATHODE C CATHODE G CATHODE B COMMON ANODE PINS 4, 5, 12: NO CONNECTION FOR HDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332E Common Cathode HDSP-333E/333G/333Y/333A 4.12 COM PIN NO. 1 2 4 6 7 8 A 14 B 13 C 8 D 7 E 6 F 1 G 2 DP 9 9 12 13 14 CONNECTION ANODE F ANODE G COMMON CATHODE ANODE E ANODE D ANODE C ANODE DP COMMON CATHODE ANODE B ANODE A PINS 3, 5, 10, 11: NC 6 Internal Circuit Diagram Common Cathode HDSP-334E/334G/334Y/334A 1.6 COM PIN NO. 1 2 3 4 5 6 A 10 B 9 C 8 D 5 E 2 F 4 G 3 DP 7 7 8 9 10 CONNECTION COMMON CATHODE ANODE E ANODE G ANODE F ANODE D COMMON CATHODE ANODE DP ANODE C ANODE B ANODE A PINS 11, 12, 13, 14: NC 7 Absolute Maximum Ratings at TA = 25˚C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 kHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds (at 2 mm Distance from the Body) Notes: 1. Derate above 25˚C at 0.33 mA/˚C. 2. Derate above 25˚C at 0.33 mA/˚C. 3. Derate above 25˚C at 0.2 mA/˚C. 4. Derate above 25˚C at 0.27 mA/˚C. HER HDSP-33xE 65 25[1] 100 –35 to +85 –35 to +85 5 250 Green HDSP-33xG 65 25[2] 100 –35 to +85 –35 to +85 5 250 AlGaAs Red HDSP-33xA 30 15[3] 80 –35 to +85 –35 to +85 5 250 Yellow HDSP-33xY 52 20[4] 80 –35 to +85 –35 to +85 5 250 Units mW mA mA ˚C ˚C V ˚C Electrical/Optical Characteristics at TA = 25˚C High Efficiency Red (HER) Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF λPEAK λd VR Min. 0.8 Typ. 1.15 1.80 2.05 635 620 Max. Units mcd mcd V nm nm V Test Conditions I F = 5 mA IF = 10 mA IF = 20 mA 331E 332E 333E 334E 2.40 5 IR = 100 µA Green Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF λPEAK λd VR Min. 0.8 1.80 Typ. 2.00 2.07 2.25 568 573 Max. Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA 331G 333G 334G 2.60 5 IR = 100 µA 8 AlGaAs Red Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF λPEAK λd VR Min. 2.001 331A 333A 334A Typ. 3.93 4.20 1.85 660 643 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 m A IF = 10 mA IF = 20 mA 2.00 5 IR = 100 µA Yellow Devices HDSPParameter Luminous Intensity/Segment Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage Symbol IV VF λPEAK λd VR Min. 0.80 331Y 333Y 334Y Typ. 0.71 1.50 2.15 595 590 5 Max. Units mcd mcd V nm nm V Test Conditions IF = 5 m A IF = 10 mA IF = 20 mA 2.60 IR = 100 µA Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K HER/Green/Yellow Min.[1] Max.[1] 0.801 1.250 1.251 2.000 2.001 3.200 NA NA NA NA AlGaAs Red Min.[1] NA NA 2.001 3.201 5.051 Max.[1] NA NA 3.200 5.050 8.000 Note: 1. Tolerance for each bin limit is ± 10%. Color Bin Limits (nm at 10 mA) Color Green Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5 Yellow Note: 1. Tolerance for each bin limit is 1 nm. 9 High Efficiency Red (HER) IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA 30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 120 100 80 60 40 20 0 0 20 40 60 80 100 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 TA – AMBIENT TEMPERATURE – °C VF – FORWARD VOLTAGE – V Figure 1. Maximum allowable average or DC current vs. ambient temperature. Figure 2. Forward current vs. forward voltage. 2.5 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 3. Relative luminous intensity vs. DC forward current. Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. 10 Green 30 GAP GREEN 25 20 15 10 5 0 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA 120 100 80 60 40 20 0 0 20 40 60 80 100 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF – FORWARD VOLTAGE – V TA – AMBIENT TEMPERATURE – °C Figure 5. Maximum allowable average or DC current vs. ambient temperature. Figure 6. Forward current vs. forward voltage. 3.0 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 1.2 1.0 0.8 0.6 0.4 0.2 0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA IF – FORWARD CURRENT FOR SEGMENT – mA Figure 7. Relative luminous intensity vs. DC forward current. Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 11 AlGaAs Red 16 14 12 10 8 6 4 2 0 0 20 40 60 80 100 AIGaAs RED IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA 120 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 TA – AMBIENT TEMPERATURE – °C VF – FORWARD VOLTAGE – V Figure 9. Maximum allowable average or DC current vs. ambient temperature. Figure 10. Forward current vs. forward voltage. 3.0 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 2.5 2.0 1.5 1.0 0.5 0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA IF – FORWARD CURRENT FOR SEGMENT – mA Figure 11. Relative luminous intensity vs. DC forward current. Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 12 Yellow 25 YELLOW 20 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA 120 100 80 60 40 20 0 15 10 5 0 0 20 40 60 80 100 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 TA – AMBIENT TEMPERATURE – °C VF – FORWARD VOLTAGE – V Figure 13. Maximum allowable average or DC current vs. ambient temperature. Figure 14. Forward current vs. forward voltage. 3.5 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 15. Relative luminous intensity vs. DC forward current. Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. 13 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Obsoletes 5988-2971EN July 17, 2004 5988-9421EN