909F

Agilent 909F Precision Coaxial Termination Data Sheet DC to 18 GHz Specifications Specifications describe the instruments’ warranted performance over the +15° to +35° C temperature range. Supplemental characteristics as denoted by “typical”, “nominal”, or “approximate” are provided as information useful in applying the instrument, but are non-warranted performance parameters. Environmental Temperature: Operating: +15° to +35° C Non Operating: –55° to +75° C Altitude: Operating: 15,000 ft Non Operating: 50,000 ft Humidity: Cycling 5 days, +40° C @ 95% RH Vibration: 0.015", 5-55-5 Hz, 15 min., 3 axes Shock: 100 g, 1-2 ms, 3 times 3 planes EMC: Radiation interference is within the requirements of MILSTD-461, method RE02, VDE 0871, CISPR Publication 11. Description Agilent Technologies’ 909F family of precision low reflection loads are intended for use as calibration standards. Tantalum nitride on sapphire thinfilm technology is used for exceptional long-term impedance stability. To ensure the best possible wear resistance characteristics, gold-plated beryllium copper has been used for the connector contacts. Frequency Range: dc to 18 GHz Impedance (nominal): 50 Ω Connector: 909F, APC-7 Option 012, type-N (m) Option 013, type-N (f) Reflection Coefficient (max): 909F dc to 5 GHz, 0.0025 (1.005 SWR) 5 to 6 GHz, 0.005 (1.01 SWR) 6 to 18 GHz, 0.07 (1.15 SWR) Option 012 dc to 2 GHz, 0.0035 (1.007 SWR) 2 to 3 GHz, 0.005 (1.01 SWR) 3 to 6 GHz, 0.01 (1.02 SWR) 6 to 18 GHz, 0.07 (1.15 SWR) Option 013 dc to 2 GHz, 0.0035 (1.007 SWR) 2 to 3 GHz, 0.005 (1.01 SWR) 3 to 6 GHz, 0.01 (1.02 SWR) 6 to 18 GHz, 0.07 (1.15 SWR) Power Rating: 500 mW avg.; 100 W peak, 10 µS/pulse Weight: net–60g (2 oz); shipping–200 g (8 oz) Remove all doubt www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Our repair and calibration services will get your equipment back to you, performing like new, when promised. You will get full value out of your Agilent equipment throughout its lifetime. Your equipment will be serviced by Agilenttrained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. Agilent offers a wide range of additional expert test and measurement services for your equipment, including initial start-up assistance, onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt www.agilent.com www.agilent.com/find/mta For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Americas Canada Latin America United States Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Thailand 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 1 800 226 008 (877) 894-4414 305 269 7500 (800) 829-4444 www.agilent.com/find/agilentdirect Quickly choose and use your test equipment solutions with confidence. Europe & Middle East Austria Belgium Denmark Finland France Germany 01 36027 71571 32 (0) 2 404 93 40 45 70 13 15 15 358 (0) 10 855 2100 0825 010 700* *0.125 €/minute 07031 464 6333** **0.14 €/minute Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland 0800 80 53 53 United Kingdom 44 (0) 118 9276201 Other European countries: www.agilent.com/find/contactus Revised: July 17, 2008 Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 1996, 2000, 2005, 2006, 2008 Printed in USA, August 21, 2008 5091-2815E