ACSL-6420-56T

Agilent ACSL-6xx0 Multi-Channel and Bi-Directional, 15 MBd Digital Logic Gate Optocoupler Data Sheet Features • Available in dual, triple and quad channel configurations • Bi-directional Description ACSL-6xx0 are truly isolated, multi-channel and bi-directional, high-speed optocouplers. Integration of multiple optocouplers in monolithic form is achieved through patented process technology. These devices provide full duplex and bi-directional isolated data transfer and communication capability in compact surface mount packages. Available in 15 Mbd speed option and wide supply voltage range. These high channel density make them ideally suited to isolating data conversion devices, parallel buses and peripheral interfaces. They are available in 8-pin and 16–pin narrow-body SOIC package and are specified over the temperature range of -40° C to +100° C. Applications • Full duplex communication • Isolated line receiver • Computer-peripheral interfaces • Microprocessor system interfaces • Digital isolation for A/D and D/A conversion • Switching power supply • Instrument input/output isolation • Ground loop elimination • Pulse transformer replacement • Wide supply voltage range 3.0V to 5.5V • High-speed: 15 MBd typical, 10 MBd minimum • 10 kV/µs minimum Common Mode Rejection (CMR) at Vcm = 1000 V • LSTTL/TTL compatible • Safety and regulatory approvals (Pending) – 2500Vrms for 1 min per UL1577 – CSA Component Acceptance – IEC/EN/DIN EN 60747-5-2 • 16 Pin narrow-body SOIC package for triple and quad channel • -40 to 100°C temperature range CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation, which may be induced by ESD. Device Selection Guide Device Number ACSL-6210 ACSL-6300* ACSL-6310* ACSL-6400 ACSL-6410* ACSL-6420* * Advanced Information Channel Configuration Dual, Bi-Directional` Triple, All-in-One Triple, Bi-Directional, 2/1 Quad, All-in-One Quad, Bi-Directional, 3/1 Quad, Bi-Directional, 2/2 Package 8-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline 16-pin Small Outline Ordering Information ACSL-6XX0-X Y Z E Lead Free Option Channel Configuration (Refer to the Device Selection Guide) R = SO-8 Package, 100 units per tube T = SO-16 Package, 50 units per tube 6 = IEC/EN/DIN EN 60747-5-2, VIORM = 560V peak Option 5 = Tape and Reel Packaging Option, 1500 units per reel for SO-8 Package and 1000 units per reel for SO-16 Package Pin Description Symbol VDD1 VDD2 ANODEx CATHODEx Description Power Supply 1 Power Supply 2 LED Anode LED Cathode Symbol GND1 GND2 NC VOX Description Power Supply Ground 1 Power Supply Ground 2 Not Connected Output Signal Truth Table (Positive Logic) LED ON OFF OUTPUT L H 2 Functional Diagrams ACSL-6210 - Dual-Ch, Bi-Dir ACSL-6300 - Triple-Ch, All-in-One* ACSL-6310 - Triple-Ch, Bi-Dir (2/1)* ACSL-6400 - Quad-Ch, All-in-One ACSL-6410 - Quad-Ch, Bi-Dir (3/1)* ACSL-6420 - Quad-Ch, Bi-Dir (2/2)* * Advanced Information 3 Package Outline Drawings ACSL-6210 Small Outline SO-8 Package 0.189 (4.80) 0.197 (5.00) 8 0.228 (5.80) 0.244 (6.20) 7 6 5 0.150 (3.80) 0.157 (4.00) 1 2 3 4 0.013 (0.33) 0.020 (0.51) 0.010 (0.25) 0.020 (0.50) x 45° 0.054 (1.37) 0.069 (1.75) 0.040 (1.016) 0.060 (1.524) 0.004 (0.10) 0.010 (0.25) 0° 8° 0.016 (0.40) 0.050 (1.27) 0.008 (0.19) 0.010 (0.25) DIMENSIONS: INCHES (MILLIMETERS) MIN MAX ACSL-6300*, ACSL-6310*, ACSL-6400, ACSL-6410* and ACSL-6420* Small Outline SO-16 Package 0.386 (9.802) 0.394 (9.999) 8 1 0.228 (5.791) 0.244 (6.197) 0.152 (3.861) 0.157 (3.988) 0.013 (0.330) 0.020 (0.508) 0.054 (1.372) 0.068 (1.727) 0.050 (1.270) 0.060 (1.524) 0.040 (1.016) 0.060 (1.524) 0.004 (0.102) 0.010 (0.249) 0.008 (0.191) 0.010 (0.249) 0.010 (0.245) x 4 5°ß 0.020 (0.508) 0° – 8° TY P 0.016 (0.406) 0.050 (1.270) DIMENSIONS: INCHES (MIL LIMETERS) MIN MA X 4 Solder Reflow Temperature Profile 300 PREHEATING RATE 3°C + 1°C/–0.5°C/SEC. REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC. PEAK TEMP. 245°C PEAK TEMP. 240°C 200 PEAK TEMP. 230°C TEMPERATURE (°C) 2.5°C ± 0.5°C/SEC. 160°C 150°C 140°C 3°C + 1°C/–0.5°C 30 SEC. 30 SEC. SOLDERING TIME 200°C 100 PREHEATING TIME 150°C, 90 ± 30 SEC. 50 SEC. TIGHT TYPICAL LOOSE ROOM TEMPERATURE 0 0 50 100 TIME (SECONDS) 150 200 250 Pb-free IR Profile 5 Regulatory Information Insulation and Safety Related Specifications Parameter Minimum External Air Gap (Clearance) Minimum Externa l Tracking(Creepage) Minimum Internal Plastic Gap (Internal Clearance) Tracking Resistance (Comparative Tracking Index) CTI Isolation Group Symbol L(I01) L(I02) Value 4.9 4.5 0.08 175 IIIa Units mm mm mm Volts Conditions Measured from input terminals to output terminals, shortest distance through air Measured from input terminals to output terminals, shortest distance path through body Insulation thickness between emitter and detector; also known as distance through insulation DIN IEC 112/VDE0303 Part 1 Material Group (DIN VDE 0110, 1/89, Table 1) IEC/EN/DIN EN 60747-5-2 Insulation Related Characteristics (Option X6X Only) Description Installation Classification per DIN VDE 0110/1.89, Table 1 for rated mains voltage ≤ 150V rms for rated mains voltage ≤ 300V rms Climatic Classification Pollution Degree (DIN VDE 0110/1.89) Maximum Working Insulation Voltage Input to Output Test Voltage, Method b * VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5 pC Input to Output Test Voltage, Method a * VIORM x 1.5 = VPR, Type and Sample Test, Tm = 60 sec, Partial Discharge < 5 pC Highest Allowable Overvoltage * (Transient Overvoltage, tini = 10 sec) Safety Limiting Values (Maximum values allowed in the event of a failure) Case Temperature Input Current Output Power Insulation Resistance at TS, VIO = 500V VIORM VPR Symbol ACSL-6XX0-X6X I-IV I-III 55/100/21 2 560 1050 Units Vpeak Vpeak VPR 840 Vpeak VIOTM 4000 Vpeak TS IS,INPUT PS,OUTPUT RIO 175 150 600 109 °C mA mW Ω *Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-2, for a detailed description. Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application. 6 Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Supply Voltage (1 Minute Maximum) Reverse Input Voltage (Per Channel) Output Voltage (Per Channel) Average Forward Input Current [1] (Per Channel) Output Current (Per Channel) Input Power Dissipation[2] (Per Channel) Output Power Dissipation [2] (Per Channel) Symbol Ts TA VDD1 , VDD2 VR VO IF IO P1 PO Min. -55 -40 Max. 125 100 7 5 7 15 50 27 60 Units °C °C V V V mA mA mW mW Recommended Operating Conditions Parameter Operating Temperature Input Current, Low Level [3] Input Current, High Level [4] Supply Voltage Fan Out (at TA= 1kΩ) Output Pull-up Resistor Symbol TA IFL IFH VDD1, VDD2 N RL Min. -40 0 7 3.0 Max. 100 250 15 5.5 5 Units °C µA mA V TTL Loads Ω 330 4k Notes: 1. Peaking circuits may produce transient input currents up to 50 mA, 50 ns max. pulse width, provided average current does not exceed its max. values. 2. Derate total package power dissipation, PT linearly above +80°C free-air temperature at a rate of 5.45 mW/°C for the SO8 package. PT=number of channels multiply by (PI+PO). For SO16 package data, contact factory for assistance. 3. The off condition can be guaranteed by ensuring that VFL ≤ 0.8V. 4. The initial switching threshold is 7 mA or less. It is recommended that minimum 8 mA be used for best performance and to permit guardband for LED degradation. 7 Electrical Specifications Over recommended operating range (3.0V ≤ VDD1 ≤ 3.6V, 3.0V ≤ VDD2 ≤ 3.6V, TA = -40° C to +100° C) unless otherwise specified. All typical specifications are at TA = +25° C , VDD1 = VDD2 = +3.3V. Parameter Input Threshold Current High Level Output Current Low Level Output Voltage High Level Supply Current (per channel) Low Level Supply Current (per channel) Input Forward Voltage Input Reverse Breakdown Voltage Input Diode Temperature Coefficient Input Capacitance Symbol ITH IOH VOL IDDH IDDL VF BVR ∆VF / ∆TA CIN Min. Typ. 2.7 4.7 0.36 3.2 4.6 Max. 7.0 100.0 0.68 5.0 7.5 1.80 Units mA µA V mA mA V V Test Conditions IOL(Sinking)=13 mA, VO = 0.6V IF = 250 µA, VO = 3.3V IOL(Sinking) = 13 mA, IF = 7mA IF = 0 mA IF = 10 mA IF = 10 mA, TA = 25°C IR = 10 µA IF = 10 mA f = 1 MHz, VF = 0V 1.25 5.0 1.52 -1.8 80 mV/°C pF Switching Specifications Over recommended operating range (3.0V ≤ VDD1 ≤ 3.6V, 3.0V ≤ VDD2 ≤ 3.6V, IF = 8.0 mA, TA = -40° C to +100° C) unless otherwise specified. All typical specifications are at TA = +25° C , VDD1 = VDD2 = +3.3V. Parameter Maximum Data Rate Pulse Width Propagation Delay Time to Logic High Output Level [5] Propagation Delay Time to Logic Low Output Level [6] Pulse Width Distortion |tPHL – tPLH| Propagation Delay Skew[7] Output Rise Time (10 – 90%) Output Fall Time (10 – 90%) Logic High Common Mode Transient Immunity [8] Symbol Min. 10 Typ. 15 Max. Units MBd ns Test Conditions RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF RL = 350Ω, CL = 15 pF Vcm = 1000V, IF = 0 mA, VO = 2.0V, RL = 350Ω, TA = 25°C Vcm = 1000V, IF = 8 mA, VO = 0.8V, RL = 350Ω, TA = 25°C tPW tPLH tPHL |PWD| tPSK tR tF |CMH| 100 52 44 8 100 100 35 40 35 12 10 ns ns ns ns ns ns kV/µs Logic Low Common Mode Transient Immunity [8] |CML| 10 kV/µs Notes: 5. tPLH is measured from the 4.0 mA level on the falling edge of the input pulse to the 1.5V level on the rising edge of the output pulse. 6. tPHL is measured from the 4.0 mA level on the rising edge of the input pulse to the 1.5V level on the falling edge of the output pulse. 7. tPSK is equal to the worst case difference in tPHL and/or tPLH that will be seen between units at any given temperature and specified test conditions. 8. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 2.0V. CML is the maximum common mode voltage slew rate that can be sustained while maintaining VO < 0.8V. The common mode voltage slew rates apply to both rising and falling common mode voltage edges. 8 Electrical Specifications Over recommended operating range (4.5V ≤ VDD1 ≤ 5.5V, 4.5V ≤ VDD2 ≤ 5.5V, TA = -40° C to +100° C) unless otherwise specified. All typical specifications are at TA = +25° C, VDD1 = VDD2 = +5.0V. Parameter Input Threshold Current High Level Output Current Low Level Output Voltage High Level Supply Current (per channel) Low Level Supply Current (per channel) Input Forward Voltage Input Reverse Breakdown Voltage Input Diode Temperature Coefficient Input Capacitance Symbol ITH IOH VOL IDDH IDDL VF BVR ∆VF / ∆TA CIN Min. Typ. 2.7 3.8 0.36 4.3 5.8 Max. 7.0 100.0 0.6 7.5 10.5 1.8 Units mA µA V mA mA V V Test Conditions IOL(Sinking)=13 mA, VO= 0.6V IF = 250 µA, VO= 5.5V IOL(Sinking)=13 mA, IF=7 mA IF = 0 mA IF = 10 mA IF = 10 mA, TA = 25 °C IR = 10 µA IF = 10 mA f = 1 MHz, VF = 0 V 1.25 5.0 1.52 -1.8 80 mV/°C pF Switching Specifications Over recommended operating range (4.5V ≤ VDD1 ≤ 5.5V, 4.5V ≤ VDD2 ≤ 5.5V, IF = 8.0 mA, TA = -40° C to +100° C) unless otherwise specified. All typical specifications are at TA=+25° C, VDD1 = VDD2 = +5.0V. Parameter Maximum Data Rate Pulse Width Propagation Delay Time to Logic High Output Level[5] Propagation Delay Time to Logic Low Output Level[6] Pulse Width Distortion |tPHL – tPLH| Propagation Delay Skew[7] Output Rise Time (10 – 90%) Output Fall Time (10 – 90%) Logic High Common Mode Transient Immunity [8] Symbol Min. 10 Typ. 15 Max. Units MBd ns Test Conditions RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF RL = 350Ω, CL =15 pF Vcm= 1000V, IF=0 mA, VO = 2.0V, RL=350Ω, TA = 25°C Vcm= 1000V, IF= 8 mA, VO = 0.8V, RL= 350Ω, TA = 25°C tPW tPLH tPHL |PWD| tPSK tR tF |CMH| 100 46 43 5 100 100 35 40 30 12 10 ns ns ns ns ns ns kV/µs Logic Low Common Mode Transient Immunity [8] |CML| 10 kV/µs Notes: 5. tPLH is measured from the 4.0 mA level on the falling edge of the input pulse to the 1.5V level on the rising edge of the output pulse. 6. tPHL is measured from the 4.0 mA level on the rising edge of the input pulse to the 1.5V level on the falling edge of the output pulse. 7. tPSK is equal to the worst case difference in tPHL and/or tPLH that will be seen between units at any given temperature and specified test conditions. 8. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 2.0V. CML is the maximum common mode voltage slew rate that can be sustained while maintaining VO < 0.8V. The common mode voltage slew rates apply to both rising and falling common mode voltage edges. 9 Package Characteristics All specifications are at TA=+25° C. Parameter Input-Output Momentary Withstand Voltage[9] Input-Output Insulation [10] [11] Input-Output Resistance[10] Input-Output Capacitance[10] Input-Input Insulation Leakage Current[12] Input-Input Resistance[12] Input-Input Capacitance[12] SO8 SO16 SO8 SO16 SO8 SO16 SO8 SO16 SO8 SO16 SO8 SO16 SO8 SO16 Symbol VISO VISO II-O II-O RI-O RI-O CI-O CI-O II-I II-I RI-I RI-I CI-I CI-I Min. 2500 2500 Typ. Max. Units VRMS Test Conditions RH ≤ 50%, t = 1 min RH ≤ 50%, t = 1 min 45% RH, t=5 sec, VI-O= 3kV DC 45% RH, t=5 sec, VI-O =3kV DC VI-O = 500V DC VI-O = 500V DC f = 1 MHz f = 1 MHz RH ≤ 45%, t = 5 sec, VI-I = 500V RH ≤ 45%, t = 5 sec, VI-I = 500V RH ≤ 45%, t= 5 sec, VI-I = 500V RH ≤ 45%, t =5 sec, VI-I =500V f = 1 MHz f = 1 MHz 5 5 109 109 1011 1011 0.7 0.7 0.005 0.005 1011 1011 0.1 0.12 µA Ω pF µA Ω pF Electrostatic Discharge Sensitivity This product has been tested for electrostatic sensitivity to the limits stated in the specifications. However, Agilent recommends that all integrated circuits be handled with appropriate care to avoid damage. Damage caused by inappropriate handling or storage could range from performance degradation to complete failure. Notes: 9. VISO is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For continuous voltage rating, refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), the equipment level safety specification or Agilent Application Note 1074 entitled “Optocoupler Input-Output Endurance Voltage.” 10. Measured between each input pair shorted together and all output connections for that channel shorted together. 11. In accordance to UL1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 3000 Vrms for 1 sec (leakage detection current limit, II-O ≤ 5 µA). This test is performed before the 100% production test for partial discharge (Method b) shown in the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table, if applicable. 12. Measured between inputs with the LED anode and cathode shorted together. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (65) 6756 2394 India, Australia, New Zealand: (65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (65) 6755 2044 Taiwan: (65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. November 1, 2004 5989-1343EN