HLMP-3490-I00XX

T-13/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Technical Data HLMP-3707, -3807, -3907 HLMP-3750, -3850, -3950, -3960 HLMP-3390, -3490, -3590 HLMP-1340, -1440, -1540 HLMP-D640 HLMP-K640 Applications • Lighted Switches • Backlighting Front Panels • Light Pipe Sources • Keyboard Indicators Features • Improved Brightness • Improved Color Performance • Available in Popular T-1 and T-13/4 Packages • New Sturdy Leads • IC Compatible/Low Current Capability • Reliable and Rugged • Choice of 3 Bright Colors High Efficiency Red High Brightness Yellow High Performance Green Description These non-diffused lamps outperform conventional LED lamps. By utilizing new higher intensity material, we achieve superior product performance. The HLMP-3750/-3390/-1340 Series Lamps are Gallium Arsenide Phosphide on Gallium Phosphide red light emitting diodes. The HLMP-3850/ -3490/-1440 Series are Gallium Arsenide Phosphide on Gallium Phosphide yellow light emitting diodes. The HLMP-3950/-3590/3960/-1540/-D640/-K640 Series Lamps are Gallium Phosphide green light emitting diodes. 2 Selection Guide Luminous Intensity Iv (mcd) @ 20mA Package Description T-13 /4 Red Color Device HLMP3707-L00xx 3750 3750-L00xx Yellow 3807-K00xx 3850 3850-K00xx 3850-KL0xx Green 3907-K00xx 3914-K00xx 3950 3950-K00xx 3950-LM0xx 3960-K0xxx Emerald Green T-13 /4 Low Profile Red Yellow D640-E00xx 3390 3490 3490-I00xx Green 3590 3590-I00xx T-1 Red 1340 1340-H00xx 1340-J00xx 1340-JK0xx Yellow 1440 1440-H00xx 1440-HI0xx 1440-HIB00 Green 1540 1540-H00xx 1540-IJ0xx Emerald Green K640 K640-D00xx K640-FGNxx Min. 90.2 90.2 90.2 96.2 96.2 96.2 96.2 111.7 111.7 111.7 111.7 170.0 111.7 6.7 35.2 37.6 37.6 43.6 43.6 35.2 8.6 35.2 35.2 23.5 23.5 23.5 23.5 27.3 27.3 43.6 4.2 4.2 10.6 Typ. 125.0 125.0 140.0 140.0 150.0 265.0 265.0 300.0 265.0 21.0 55.0 55.0 55.0 55.0 55.0 55.0 15.0 55.0 55.0 45.0 45.0 45.0 45.0 60.0 21.0 21.0 20.0 Max. 294.0 490.0 27.6 112.8 75.2 75.2 139.6 34.0 2θ1/2 Degree 24 24 24 24 24 24 24 24 24 24 24 24 24 24 32 32 32 32 32 45 45 45 45 45 45 45 45 45 45 45 45 45 45 Package Outline F A A F A A A F D A A A E D B B B B B C C C C C C C C C C C C C C 3 5.08 (0.200) 4.57 (0.180) 5.08 (0.200) 4.78 (0.188) 5.08 (0.200) 4.78 (0.188) 9.19 (0.362) 8.43 (0.332) 9.07 (0.357) 8.56 (0.337) 12.47 (0.491) 11.71 (0.461) 13.11 (0.516) 12.34 (0.486) 9.07 (0.357) 8.56 (0.337) 0.89 (0.035) 0.64 (0.025) 25.40 (1.00) MIN. 0.89 (0.035) 0.64 (0.025) 1.02 (0.040) MAX. 0.89 (0.035) 0.64 (0.025) 1.02 (0.040) MAX. EPOXY MENISCUS 1.32 (0.052) 1.02 (0.040) 0.102 (0.004) MAX. TYP. 22.86 MIN. (0.900) 0.10 (0.004) MAX. 23.0 MIN. (0.900) CATHODE LEAD (NOTE 1) 1.27 (0.050) NOM. 0.46 (0.018) SQUARE NOMINAL 1.52 (0.060) 1.02 (0.040) 0.74 (0.029) 0.58 (0.023) SQUARE 1.52 (0.060) 1.02 (0.040) 0.53 (0.021) SQ. 0.43 (0.017) 6.10 (0.240) 5.59 (0.220) CATHODE FLAT 2.54 (0.100) NOM. ∅ 6.10 (0.240) 5.60 (0.220) 6.10 (0.240) 5.60 (0.220) CATHODE FLAT 2.79 (0.110) 2.29 (0.090) 2.54 (0.100) NOM. PACKAGE OUTLINE "D" HLMP-D640 PACKAGE OUTLINE "E" HLMP-3960 PACKAGE OUTLINE "F" HLMP-3707/-3807/-3907 4 Part Numbering System HLMP - x x xx - x x x xx Mechanical Options 00: Bulk 01: Tape & Reel, Crimped Leads 02, Bx: Tape & Reel, Straight Leads A1,B1: Right Angle Housing, Uneven Leads A2,B2: Right Angle Housing, Even Leads Dx, Ex: Ammo Pack, Straight Leads FH: 2 Iv bin select with Inventory Control Vx: Ammo Pack, Crimped Leads Color Bin Options 0: Full color bin distribution B: Color bin 2&3 only N: Color bin 6&7 only Maximum Iv Bin Options 0: Open (No. max. limit) Others: Please refer to the Iv bin table Minimum Iv Bin Options Please refer to the Iv bin table Color Options 3,7: GaP HER 4,8: GaP Yellow (except K4xx series) 5,9: GaP Green 6: GaP Emerald Green Package Option 1,K: T-1 (3 mm) 3,D: T-13/4 (5 mm) Absolute Maximum Ratings at TA = 25°C Parameter Peak Forward Current Average Forward DC Current[2] Current[3] Current[1] Red 90 25 30 500 5 110 -55 to +100 Yellow 60 20 20 500 5 110 -55 to +100 Green/Emerald Green 90 25 30 500 5 110 -20 to +100 -55 to +100 260°C for 5 seconds Units mA mA mA mA V °C °C Transient Forward (10 µs Pulse) Reverse Voltage (IR = 100 µA) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Notes: 1. See Figure 2 to establish pulsed operating conditions. 2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C. 3. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current. 5 Electrical/Optical Characteristics at TA = 25 °C Symbol Description λPEAK Peak Wavelength T-13 /4 37xx 38xx 39xx D640 37xx 38xx 39xx D640 37xx 38xx 39xx D640 37xx 38xx 39xx D640 37xx 38xx 39xx D640 37xx 38xx 39xx D640 T-13/4 Low Dome 3390 3490 3590 3390 3490 3590 3390 3490 3590 3390 3490 3590 3390 3490 3590 3390 3490 3590 1340 1440 1540 K640 VF Forward Voltage 37xx 38xx 39xx D640 37xx 38xx 39xx D640 37xx 38xx 39xx D640 3390 3490 3590 3390 3490 3590 3390 3490 3590 1340 1440 1540 K640 1340 1440 1540 K640 1340 1440 1540 K640 1.5 1.5 1.5 5.0 T-1 1340 1440 1540 K640 1340 1440 1540 K640 1340 1440 1540 K640 1340 1440 1540 K640 1340 1440 1540 K640 Min. Typ. 635 583 565 558 626 585 569 560 40 36 28 24 90 90 500 3100 11 15 18 35 210 210 210 510 290 290 290 290 1.9 2.1 2.2 2.2 2.6 2.6 3.0 3.0 Max. Units nm Test Conditions Measurement at Peak λd Dominant Wavelength nm Note 1 ∆λ3/4 Spectral Line Halfwidth nm τs Speed of Respond ns C Capacitance pF V F = 0, f = 1 MHz RθJ-PIN Thermal Resistance °C/W Junction to Cathode Lead V IF = 20 mA (Figure 3) VR Reverse Breakdown Voltage Luminous Efficacy V IF = 100 µA ηv 145 500 595 655 Lumens Note 2 Watt Notes: 1. The dominant wavelength, ld , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 2. The radiant intensity, Ie , in watts per steradian, may be found from the equation Ie = IV /hV , where IV is the luminous intensity in candelas and hV is the luminous efficacy in lumens/watt. 6 Red, Yellow, and Green 1.0 EMERALD GREEN TA = 25° C RELATIVE INTENSITY GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 WAVELENGTH – nm 650 700 Figure 1. Relative Intensity vs. Wavelength. Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 3. Forward Current vs. Forward Voltage. Figure 4. Relative Luminous Intensity vs. Forward Current. Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 7 Figure 6. Relative Luminous Intensity vs. Angular Displacement. T-13/4 Lamp. Figure 7. Relative Luminous Intensity vs. Angular Displacement. T-13/4 Low Profile Lamp. Intensity Bin Limits Intensity Bin Limits Color Red Bin G H I J K L M N O P Q R S T U V W X Y Z Intensity Range (mcd) Min. Max. 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 Figure 8. Relative Luminous Intensity vs. Angular Displacement. T-1 Lamp. Maximum tolerance for each bin limit is ± 18%. 8 Intensity Bin Limits (continued) Intensity Range (mcd) Min. Max. 26.5 42.3 42.3 67.7 67.7 108.2 108.2 173.2 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0 1.1 1.8 1.8 2.9 2.9 4.7 4.7 7.6 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0 Color Categories Color Emerald Green Cat # 9 8 7 6 6 5 4 3 2 1 3 2 4 5 1 2 3 4 5 6 7 8 Lambda (nm) Min. Max. 552.5 555.5 555.5 558.5 558.5 561.5 561.5 564.5 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 597.0 599.5 599.5 602.0 602.0 604.5 604.5 607.5 607.5 610.5 610.5 613.5 613.5 616.5 616.5 619.5 Color Yellow Green/ Emerald Green Bin H I J K L M N O P Q R S T U V W A B C D E F G H I J K L M N O P Q R S T U V W Green Yellow Orange Maximum tolerance for each bin limit is ± 0.5nm. Maximum tolerance for each bin limit is ± 18%. 9 Mechanical Option Matrix Mechanical Option Code 00 01 02 A1 A2 B1 B2 BJ EG FH VR Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, min. increment 1300 pcs/bag for T-13/4, 1800 pcs/bag for T-1 Tape & Reel, straight leads, min. increment 1300 pcs/bag for T-13/4 , 1800 pcs/bag for T-1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-1, Right Angle Housing, even leads, minimum increment 500 psc/bag T-13/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-13/4, Right Angle Housing, even leads, minimum increment 500 psc/bag T-1, Tape & Reel, straight leads, minimum increment 2000 pcs/bag Ammo Pack, straight leads in 5 K increment Devices that require inventory control and 2 Iv bin select Ammo Pack, crimped leads, min. increment 2 k for T-13/4 and T-1 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2003 Agilent Technologies, Inc. Obsoletes 5988-8520EN April 8, 2003 5988-9363EN